Gate Repair Services in Fort Worth - Same-Day Repair, Priced Before We Start

Gate Repair Services in Fort Worth, TX

A gate that won’t close in Fort Worth isn’t something you can put off until next week. Around here, a gate is the difference between a secure backyard and a dog loose on the street, between a closed driveway and a thermal camera that catches someone wandering up toward your truck at 2 a.m. We answer the phone with a live person, any hour, and I’ll send a crew to your place fast. We service the whole city, from the older brick neighborhoods south of I-30 up to the newer subdivisions off the Alliance corridor, and out west past Loop 820 where the horse properties start. Call (817) 241-4067 and you’ll talk to a real person who actually knows gates.

Most gate problems in Fort Worth aren’t mysterious. A post has shifted in the gumbo clay. A hinge has been grinding for six months. An opener from 2009 finally gave up. We fix all of it. The name on the shop is Hal Gatewood, and the address is published, and the phone rings through to a live person 24 hours a day, 7 days a week. There’s no voicemail tree and no call center three states over. Just us, here, in the DFW area, coordinating crews that serve Fort Worth every day.

Why Fort Worth Homeowners Choose Gatewood Fence & Gate

I’ve been fixing gates since 2001 and I am the person who will look at your gate. That’s the first thing you need to know. We’re locally owned and owner-operated, with a published address and license number anyone can look up. My name is on the shop and on every invoice, which means when I tell you the post needs to be reset before we touch the opener, I’m saying it because I know I’ll see you at the grocery store in a month.

We’ve done hundreds of jobs in Wedgwood and Ridglea alone, neighborhoods where those mid-century ranch homes have gates that went in during the Ford administration and have been settling into Blackland Prairie clay ever since. Homeowners there have told us over and over that they picked us because they could verify who we were before we ever showed up. That matters, and we don’t take it for granted. We’re background-checked, uniformed, and every job carries the 90-Day Done Right Promise in writing. If it isn’t done right, one call brings me back. No runaround, no fine print, no “well that part wasn’t covered.”

We’re also certified to service the brands that show up most around Fort Worth. LiftMaster openers on suburban panel gates, Ghost Controls on ranch and acreage gates west of the loop, DoorKing on commercial and multi-family properties. If you’ve got a Mighty Mule or a Viking or an Elite, we handle those too. And when we can weld it onsite instead of swapping the whole assembly, that’s what we do. A gate sags in the hinge post, not in the middle, and that is where we start.

Gate Repair Services We Offer in Fort Worth

Gate Repair in Fort Worth

We repair gates in your driveway, not in a shop across town. On-site welding means we fix the gate where it hangs, so you see exactly what got fixed and why. Most repairs run from a broken hinge weld to a full post reset, and we quote the price before any work starts. Learn more about our Gate Repair in Fort Worth.

Gate Installation in Fort Worth

New gate, new posts, new hardware, or a full re-hang of an existing gate that was installed wrong to begin with. We build for Fort Worth’s clay soil and ice storms, not for a showroom floor in California. The post hole depth and concrete footer we use here is sized for what this ground does when it dries out and when it freezes. Learn more about our Gate Installation in Fort Worth.

Gate Motor & Opener Service in Fort Worth

Opener troubleshooting, motor replacement, limit and force adjustments, keypad programming, battery backup. If your opener is dead we check the arm, the hinges, and the post before we blame the motor. Fix the panel without the post and you’ll fix it twice. Learn more about our Gate Motor & Opener in Fort Worth.

Gate Access Control in Fort Worth

Keypads, intercoms, telephone entry, card readers, vehicle sensors, and the wiring that connects all of it. We do access control for single-family driveways, gated communities, and small commercial properties in Fort Worth. Most system failures we see are in the buried wire or a corroded connection, not the panel itself. Back to our home page for the full picture on what we cover.

Gate Parts & Welding in Fort Worth

We stock common hinge sizes, wheel trucks, receiver brackets, and operator arms on the truck, and we weld structural components onsite. If a weld is cracked and the gate is racking, we repair the steel rather than telling you to replace a $6,000 gate. On-site welding keeps your gate in your driveway and your cost down.

Neighborhoods We Serve in Fort Worth

We work everywhere inside the Fort Worth city limits and the outlying country within a reasonable drive. Typical response time in most parts of Fort Worth is same-day or next-morning for repair calls, and faster if it’s an emergency.

• Wedgwood - mid-century ranch homes, aging iron gates, posts set in expansive clay
• Ridglea - established west-side homes, ornamental gates, frequent opener replacements
• Fairmount & Ryan Place - early-1900s Craftsman and Queen Anne homes with original wrought-iron gates
• Alliance corridor - newer master-planned communities with perimeter fencing and panel gates
• Benbrook and points west - acreage, horse properties, heavy pipe-frame ranch gates

Why Fort Worth’s Climate & Housing Affect Gate Repair

Fort Worth’s ranching and Western heritage means gates are normal here in a way they aren’t in most Texas metros. Drive through almost any neighborhood south or west of downtown and you’ll see them: the modest single-driveway gate on a southwest-side home, the tall ornamental iron across a Ridglea driveway, the heavy pipe-frame ranch gate out west toward Benbrook and the Parker County line where the land opens up and the properties are measured in acres instead of lots. This city expects gates. Which means when one breaks, it doesn’t wait.

But the bigger factor is the dirt. Tarrant County sits on Blackland Prairie clay that heaves and contracts with every wet/dry cycle North Texas throws at it. We get a week of heavy rain, then three weeks of 100-degree drought, and the ground under your gate post moves enough to rack a hinge or pull a latch out of alignment. In older neighborhoods like Wedgwood, posts set in the 1970s and ’80s are now visibly leaning because the clay under them has cycled through decades of expansion and contraction. A tech who replaces the opener without diagnosing a shifted post will be back for a callback within one rainy season. We diagnose the post first.

And then there’s the ice. Fort Worth sits in a severe ice-storm corridor and historically gets hit hard. February 2021 snapped gate arms, froze hinges solid, and burned out opener motors that stalled against ice-locked hardware. Even a regular sleet event does damage. When the temperature swings from a week of 100°F in July to an ice storm in February, metal expands and contracts enough to bind a gate at the latch point or trip the opener’s force limit. If your gate started failing right after a freeze, the motor probably fought the ice and lost.

Pricing for Gate Repair in Fort Worth

Service Area - Cities Near Fort Worth

If you’re right on the edge of Fort Worth in one of the surrounding towns, we cover those too. We handle gate repair in Haltom City, North Richland Hills, Hurst, and Kennedale. Same crew, same pricing, same guarantee.

FAQs About Gate Repair in Fort Worth

How much does gate repair cost in Fort Worth?

Most gate repairs in Fort Worth run between $150 and $700 depending on whether it’s a hinge, a post, or an opener motor. A simple limit adjustment can be under $200; a full post reset with new concrete starts around $300 and goes up from there. Call (817) 241-4067 and I’ll give you a real number over the phone after I understand what the gate’s doing.

Can you fix my gate the same day?

In most parts of Fort Worth we can get a crew to you same-day or next-morning for repair work. If it’s an emergency and the gate won’t close, tell the person who answers and we’ll prioritize it. We don’t promise same-day on installations or new gate builds. Those get measured, ordered, and scheduled, and you’ll get a free measure and a written price first.

My gate post is leaning. Does that mean the gate’s ruined?

Usually not. A leaning post in Fort Worth is almost always a clay-soil problem, not a gate problem. We dig out the old post, reset it in a deeper concrete footer sized for Blackland Prairie expansion, and re-hang the gate. If we can weld the existing panel back square, we will. You don’t need a new gate just because the ground moved.

Do you work on all opener brands?

We’re certified to service nine major brands, including the ones that show up most often in Fort Worth: LiftMaster, DoorKing, Ghost Controls, Elite, Viking, Mighty Mule, FAAC, BFT, and Linear. If your opener is older or an off-brand, call anyway. Hal can usually identify it and tell you on the phone whether it’s worth repairing or replacing. The phone number is (817) 241-4067.

Do you handle gates for horse properties and acreage west of Fort Worth?

Yes. Heavy pipe-frame ranch gates and ornamental iron on acreage are a big part of our work out toward Benbrook and the Parker County line. Those gates need different hinge sizing, heavier posts, and often a solar opener or a heavier operator than a standard suburban panel gate. We spec and install for that. It’s not the same job as a Wedgwood driveway gate, and we treat it that way.

Call Gatewood Fence & Gate for Gate Repair in Fort Worth

If your gate is sagging, grinding, dead, or frozen, call (817) 241-4067. You’ll get a live person, an honest answer about what’s probably wrong, and a time we’ll be there. If you’ve already got a written estimate from someone else, bring it to us for a free second opinion. We’ll tell you if it’s fair, too high, or missing something you’ll regret later. The name is on the shop. You can look me up. Hal Gatewood, owner since 2001.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth and the surrounding DFW area. Hal has been fixing and building gates since 2001 and still answers the phone.