Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
We repair Ghost Controls gate openers across Fort Worth, and we do it as an independent Gate Repair in Fort Worth service provider, not a manufacturer affiliate. The short version: if your Ghost Controls opener is acting up, stalling, slamming, or just refusing to move, we’ll diagnose it honestly, fix what’s actually broken, and stand behind the work with a 90-Day Done Right Promise. Around here, the opener is rarely the whole story. Fort Worth clay moves, posts heave, and summer heat punishes electronics in ways a generic repair shop won’t catch. Call (817) 241-4067 and you’ll get a live person, not a voicemail tree.
Why Fort Worth Residents Choose Us for Ghost Controls Service
We’ve been fixing Ghost Controls openers in Fort Worth for over a decade now, and the brand has earned a place in our service trucks for good reason. Their controller logic is solid, their force-sensing is responsive, and when installed right on stable posts, they run for years. Hal Gatewood, the owner, grew up on the south side of Fort Worth not far from Hulen Mall, and he still lives about ten minutes from where he went to school. He learned metalwork and welding at Tarrant County College in the late ’90s, then spent a few years doing general fencing before a busted driveway gate in Wedgwood showed him how few people actually knew how to fix one right. That’s been the focus since 2001.
We keep OEM Ghost Controls boards, arms, and remotes in stock because their encrypted signal and force-sensing logic aren’t reliably replicated by aftermarket parts. When we show up to your Fort Worth driveway, we’re not guessing. We’ve seen how these openers behave on Blackland Prairie clay, on ranch gates west of Loop 820, and on ornamental iron in neighborhoods like Wedgwood and Ridglea. We also offer Ghost Controls sales & service for full replacements when repair stops making financial sense. The name is on the shop, and the shop is down the road.
Common Ghost Controls Gate Repair Problems We Solve in Fort Worth
These are the failures we see most on Ghost Controls openers across Fort Worth, and they’re rarely just “bad luck.” Each one usually has a local cause behind it:
- Limit switch drift after thunderstorms. Tarrant County thunderstorms bring brownouts and power surges that scramble Ghost Controls limit switches. The gate over-travels and slams into the post, then reverses, then slams again. We recalibrate limits and often add surge protection so it doesn’t happen the next time lightning rolls through.
- Motor capacitor failure in July and August. When Fort Worth temps sit above 100°F for days, the capacitor in a Ghost Controls motor takes real abuse. The gate starts moving, slows, then just hums and stops. We replace the capacitor and check the motor windings for heat damage before it takes out more expensive parts.
- Control board corrosion on Wedgwood-area gates. Humidity plus rain intrusion into poorly sealed junction boxes leads to corroded Ghost Controls boards. The symptoms look electrical: erratic movement, dead remotes, ghost openings. Once a board gets moisture damage, the only honest fix is replacing it, and resealing the box so it doesn’t happen again.
- Arm bracket loosening on heavy ornamental gates. Fort Worth’s clay heaves, the post shifts, and the gate’s geometry changes just enough that the Ghost Controls arm bracket works itself loose. Re-tightening alone won’t hold. We plumb the post first, then re-anchor the bracket so the arm isn’t fighting the frame.
- Gates that stall mid-cycle after the ground moves. A gate that ran fine in April may bind and stall by August because the Blackland Prairie clay expanded underneath the post. The opener isn’t failing; it’s trying to move a gate that no longer sits square. Fix the post, and the same motor and board usually run smooth again.
Ghost Controls Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s the thing most national repair guides won’t tell you about Fort Worth: the city sits on more than 20 feet of Blackland Prairie clay, and gates on the west side toward Benbrook can see up to 2 inches of seasonal vertical post movement. That’s measurably more than Dallas or Arlington because the clay deposits west of town run deeper and hold water differently. What this means for your Ghost Controls opener is simple. If the post the gate hangs on has moved, the arm geometry changes, the opener’s force-sensing sees resistance it was never designed for, and you get limit faults, stall-outs, or a board that burns itself out trying to muscle a gate through a bind.
One job that sticks with us was a Ghost Controls TDS2XP on a pipe-frame ranch gate off White Settlement Road near the Parker County line. The gate would stall mid-cycle after a July heat wave. We found the cast iron hinge post leaning 11 degrees out of plumb from clay heave, which made the arm bind every cycle. We jackhammered the post out, reset it in a 4-foot concrete footer with rebar, and the same motor and board operated smoothly through the next rain season. No new opener needed, no repeated callbacks. That’s the post-first diagnosis we bring to every Ghost Controls job in Fort Worth.
Ghost Controls Models & Products We Service in Fort Worth
We work on the full Ghost Controls line, including the TDS2XP heavy-duty dual gate opener, the DTP1 automatic driveway gate opener kit, the TSS1 solar-ready single gate opener, and the R20 residential swing gate opener, and we also handle Fort Worth Gate Installation when replacement makes sense. We carry OEM boards, arms, remotes, and brackets locally so Fort Worth turnaround stays fast. When an OEM board costs more than half the price of a new opener, we’ll tell you straight: replacement with a factory-fresh unit makes more sense than chasing board failures. We’re not here to sell you parts you don’t need. Hal builds a reputation on saying the uncomfortable thing when it saves you money.
Ghost Controls Service Pricing in Fort Worth
Every Ghost Controls service call starts with a fixed diagnostic charge, which we apply toward the repair if you hire us. From there, pricing depends on the failure. A capacitor replacement typically runs $120 to $200. Limit switch recalibration lands between $90 and $160. A new control board, installed, usually falls between $250 and $450. Post reset work with concrete footer runs $400 to $800, depending on gate weight and access. Full opener replacement, unit and labor, typically runs $700 to $1,200.
- Diagnostic service call: $65 to $95 (applied to the repair)
- Capacitor replacement: $120 to $200
- Limit switch recalibration: $90 to $160
- Control board replacement: $250 to $450 installed
- Post reset with concrete: $400 to $800
- Full Ghost Controls opener replacement: $700 to $1,200
Every price is quoted and agreed in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for an exact quote; estimates are free.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Fort Worth
Because Fort Worth’s summer heat stresses two things at once: the motor capacitor, which degrades faster above 100°F, and the metal frame, which expands enough to bind at the latch point and trip the opener’s force limits. The fix is usually a new capacitor plus a latch adjustment, but we always check the post first because clay heave makes the binding worse. Call (817) 241-4067 and we’ll diagnose it before the next heat wave hits.
Yes. A heaving post doesn’t mean you need a new opener; it means the gate’s geometry has changed. We reset the post in a deeper concrete footer, plumb it, then recalibrate the Ghost Controls limits and force settings to match. In most cases, the same opener keeps running for years. If you’re in Fort Worth and your gate has started dragging or stalling, call (817) 241-4067 for a free estimate.
We don’t need the original remote. Ghost Controls openers use a learning mode that lets us program a new OEM remote directly to the board, and we can clear old codes so a lost remote won’t open your gate. We stock Ghost Controls remotes in our Fort Worth shop, so same-day programming is usually possible. Give us a call at (817) 241-4067 and we’ll get you sorted.
It can, and we see it regularly in Fort Worth. The surge protector is the board’s first line of defense, but a nearby lightning strike or brownout can still spike through and damage the limit logic or the transformer before the protector trips. If your opener acts erratic after a storm, unplug it and call us. We’ll test the board, recalibrate limits, and recommend a whole-unit surge suppressor if the location keeps taking hits. (817) 241-4067 is the number.
Yes, especially if the posts have shifted at all. A heavier gate means more force on the arm bracket, the gears, and the limit system. When the posts heave, the arm is also fighting the angle, which compounds wear. We reinforce brackets and set posts properly on heavy Fort Worth ornamental gates so the opener isn’t doing the post’s job. For a real assessment of your gate, call (817) 241-4067; estimates are free.
Service Areas Near Fort Worth
We serve all of Fort Worth, including Wedgwood, Ridglea, Fairmount, and Ranchette, plus the surrounding communities of Ghost Controls service in Colleyville, Ghost Controls service in North Richland Hills, Hurst, Kennedale, and Keller. If you’re within Tarrant County, we’ll come to you. Check our Fort Worth service area page for full coverage details.
Book Your Ghost Controls Service in Fort Worth Today
If your Ghost Controls gate is acting up, don’t wait until the next thunderstorm or heat wave finishes it off. Call (817) 241-4067 and Hal or one of his crew will pick up. We show up when we say we will, quote the price before we start, and fix it in your driveway. Give me a call - that’s my real number, and I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.