Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Fort Worth
Gate motor and opener repair in Fort Worth usually comes down to one question: is the problem the operator, or is it the post? In Tarrant County, the honest answer is the post more often than any other metro in Texas. The Blackland Prairie clay under Fort Worth heaves with every wet spring and shrinks with every dry August, and that movement slowly pulls hinge posts out of vertical. When a post leans half an inch, the gate binds, the opener trips its force limit, and one day the motor burns out stalled against its own hardware. We fix the whole system, not just the box on the post. Call (817) 241-4067 and you will reach a live person, day or night.
Why Gatewood Fence & Gate Is Fort Worth’s Preferred Gate Motor & Opener Company
My name is Hal Gatewood, and the gate business has been mine since 2001. The shop is local, the address is published, and the license number is one anyone can look up. When a Fort Worth homeowner calls about a dead gate opener, they are not calling a call center. They are calling someone who knows that a gate on Camp Bowie Boulevard faces different stress than one west of Loop 820, and who has pulled FTTH conduit out of a hinge post in Ryan Place more than once. The person who answers the phone is the person who stands behind the work.
Fort Worth customers tell us the same thing over and over: the national outfit quoted one number on the phone, then handed them a different invoice at the door. That does not happen here. The price is agreed before any work starts, in writing. And every job, from a simple safety photocell swap to a full operator retrofit, carries our 90-Day Done Right Promise. If it is not right, I come back and make it right. One call, no runaround. We serve the whole Fort Worth area, including Fort Worth neighborhoods like Wedgwood, Ridglea, Fairmount, and the acreage west toward Benbrook, with the same crew and the same promise.
Our Gate Motor & Opener Services in Fort Worth
We work on every part of the system that moves a Fort Worth gate: the motor, the board, the arms, the hinges, the posts, the safety edges, and the loops under the concrete. Here is how we handle the work you are most likely to call us about.
Motor Repair in Fort Worth
When an opener motor quits, the first thing we check is whether it was ever the problem in the first place. In Fort Worth, a stalled motor is often a symptom of a post that has heaved out of line and bound the gate at the latch. We diagnose the post first, then test the motor under load, then give you a straight answer on whether the motor can be saved. Rebuilding or replacing a motor on a slide gate in Haltom City or a swing gate in Ridglea is routine for us, and we stock parts for most common operators right on the truck.
Motor Installation in Fort Worth
A new motor is only as good as the post it is bolted to and the safety system wired around it. When we install a gate opener in Fort Worth, we check the post is plumb in all four seasons’ worth of clay movement, set proper hinge clearance, and wire fresh safety photocells and edges so the gate cannot close on a child, a horse, or a car. We install linear operators on ranch gates west of Benbrook and standard swing operators on residential driveways all over Tarrant County, all quoted before the first tool comes off the truck.
Linear Motor Service
Linear gate openers are the workhorse of Fort Worth ranch and acreage properties because they handle long, heavy gates without the overhead clearance a swing operator needs. But a linear motor pulling against a gate that has settled onto its track will burn out quickly. We reset the gate, reshim the track, verify the chain or belt tension, and then test the motor under full load before we leave. If the transformer or control board has failed, we will tell you honestly whether the cost of the part makes a new operator the better call.
Slide Motor Service
Slide gates are common on Fort Worth commercial properties and newer residential builds along the Alliance corridor, and they fail differently than swing gates: wheels wear, tracks fill with red clay runoff, and limit switches drift until the gate slams or stops short. We service the whole slide assembly, adjust the limits to within an inch, replace worn wheels before they carve into the track, and pull the motor only when it truly needs it. The goal is a gate that runs like it was installed yesterday, not a gate that works for two weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We are certified to service nine major brands, and the ones we see most often across Fort Worth are Viking, Ghost Controls, and DoorKing. We also regularly work on LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule operators. Because we stock common control boards, limit switches, transformers, and safety edges for these brands in our local shop, we can often complete a repair in one trip instead of waiting on a warehouse three states away. If your operator is an older Gate Motor & Opener model that was discontinued, we will research whether a retrofit board or aftermarket part will work before we recommend replacing the whole unit.
Common Gate Motor & Opener Problems We See in Fort Worth Homes
- Seasonal post heave tripping the force limit. Blackland Prairie clay expands in Fort Worth’s wet springs and contracts in the dry summer, pulling gate posts out of vertical. The opener feels the resistance and trips itself before the gate reaches the latch. We reset the post in a deeper concrete footer so the cycle stops repeating.
- Ice-storm damage to arms and motors. Fort Worth sits in a severe ice corridor, and February 2021 proved it. Hinges freeze solid, the gate arms snap under the load, and motors burn out stalled against ice-locked hardware. After the thaw, we replace bent arms, free seized hinges, and test the motor under load before recommending repair or replacement.
- Obsolete control boards on 1980s and 1990s operators. Many older Fort Worth homes still run the original operator from thirty years ago, and the control boards for those units have long been discontinued. When the board fails, there is no board to buy. We will tell you straight whether a retrofit kit exists for your model or whether a new operator costs less than chasing dead parts.
- Baked and warped gate panels in summer heat. Fort Worth summers routinely pass 100°F, and that heat expands metal frames enough to bind a gate at the latch or warp a wood panel out of square. We shim and realign the hardware so the gate swings true, then adjust the force settings so the opener is not fighting the heat all day.
Pricing for Gate Motor & Opener in Fort Worth, TX
In Fort Worth, a basic motor repair like a limit-switch adjustment or photocell replacement typically runs $185-$350, depending on the part and the opener brand. A full operator replacement, including motor, board, arms, safety edges, and installation, usually lands between $1,200 and $2,600 for a residential swing gate and $1,500 to $3,200 for a slide or linear gate, with heavy ranch gates on the higher end. Post reset work in expansive clay conditions runs $400-$900 per post, which is often the difference between a gate that works for a year and one that works for fifteen. Every job is quoted and agreed in writing before work starts. You will also see the standing offers applied automatically: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for an exact quote. Estimates are free.
We Also Serve Cities Near Fort Worth
Beyond Fort Worth proper, our crews regularly work in Haltom City, North Richland Hills, Hurst, and Kennedale. The clay does not stop at the city line, and neither do we. If you are just outside Fort Worth and your gate opener is down, call and ask for one of us directly.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Fort Worth
The Blackland Prairie clay under your gate post swells and shrinks with wet and dry cycles, and after a few seasons the post leans enough that the gate binds and the opener trips itself to avoid damage. In older Fort Worth neighborhoods like Wedgwood and Ridglea, posts set in the 1970s and 1980s are now visibly off-plumb. The fix is resetting the post in a deeper concrete footer, then recalibrating the opener. Call (817) 241-4067 and we will come look at it for free.
Yes, we retrofit older operators with current safety photocells and edges whenever the control board supports the inputs. Some 1990s boards have open safety terminals and take to retrofit easily; others are too limited and honestly are better replaced. We will tell you which situation you are in before you spend a dollar.
First, do not force the gate open: a frozen hinge under load can snap an arm or twist the post. Let the ice release naturally, then have us assess the damage. We replace bent arms, free seized hinges, and test the motor under load before recommending anything. If the motor did burn out, we will quote repair and replacement side by side and you choose.
Yes, and most Fort Worth acreage properties with slide gates should have one. A loop detector buried in the drive keeps the gate from closing on a trailer, a horse, or a vehicle that is not all the way through. We install and tune loop detectors as part of most slide gate service calls on horse properties west of Loop 820, and we will show you how the settings work before we leave.
There is no calendar answer, because the clay moves at its own pace. But if your gate starts binding in the summer, scraping the latch, or tripping the opener’s force limit once or twice a season, the post has moved and it needs attention. A post reset in Fort Worth’s expansive clay typically holds for well over a decade, far longer than the seasonal adjustment approach.
Call Gatewood Fence & Gate for Gate Motor & Opener Service in Fort Worth
If your gate opener is dead, limping, or trips every time the temperature changes, call (817) 241-4067. A live person answers all day, every day. We will ask what the gate is doing, give you a straight answer about what it usually takes to fix it, and set a time that works with your day in Fort Worth. Every job comes with the 90-Day Done Right Promise in writing, and the price is agreed before any work starts. We will be there, and we will fix it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.