Gate Repair in Fort Worth - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Fort Worth

Gate repair in Fort Worth usually costs between $185 and $465 for most residential fixes, with hinge and post work on older properties running toward the higher end. We’re Gatewood Fence & Gate, and we’ve been fixing gates in Fort Worth since 2001, long enough to know that most failures here start below ground, not in the motor. Call us at (817) 241-4067 and a live person picks up, day or night. You’ll get a straight answer and a price that’s locked before any work begins.

Call (817) 241-4067

Key Takeaways

• Post movement from Blackland Prairie clay is the main reason Fort Worth gates stop latching, not opener failure.
• Typical repair pricing runs $185-$465, with a written quote agreed before we touch the gate.
• Hinge and post issues on pre-1980 homes in Wedgwood and west-side neighborhoods are our most common call.
• Every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the invoice.
• Call (817) 241-4067 for a free estimate, no trip charge inside the county.

Why Your Fort Worth Gate Stopped Closing: It’s Usually the Ground, Not the Opener

Fort Worth sits on a band of Blackland Prairie clay that expands when wet and contracts hard during dry spells. Over decades, that cycle shoves gate posts out of plumb. In older neighborhoods like Wedgwood, Ridglea, and along stretches of Camp Bowie Boulevard, we routinely find hinge posts from the 1970s and ’80s tilted an inch or two outward. The gate sags, the latch misses the receiver, and the automatic opener stalls on its force limits, which makes it look like an electrical problem when it’s actually a footing problem. Fix the panel without addressing the post and you’ll fix it twice. That’s not sales talk; it’s the ground under Fort Worth doing what it does.

In Wedgwood, a homeowner called us because their original 1970s wrought-iron swing gate would no longer close after a dry spell. Our tech found the hinge post tilted outward nearly two inches from decades of clay movement. We reset the post in a deeper concrete footer, realigned the hinges, and adjusted the LiftMaster operator’s force limits so it would stop binding. The gate has closed cleanly ever since, and the job carried our 90-Day Done Right Promise in writing.

Why Gatewood Fence & Gate Is Fort Worth’s Preferred Gate Repair Company

Hal Gatewood has owned and run this company since 2001, and he’s not passing through. His name is on the shop, the address is published, and the license number is available for anyone who wants to check. That’s the oldest accountability there is. When you call (817) 241-4067, you get a live person around the clock, not a voicemail or a queue. The person who shows up is background-checked, uniformed, and works for the owner, not for a franchise.

Fort Worth homeowners keep calling us back because we repair first, weld on site, and don’t sell replacement gates when the existing one has years left in it. We also honor a permanent 10% discount for seniors and veterans, and we waive the trip charge anywhere inside the county. If a national outfit quoted one number on the phone and charged another at the door, you already know why a company with a published address and a real owner matters.

We stock common hardware and control parts for Fort Worth’s older inventory: heavy pipe-frame ranch gates west of Loop 820 toward Benbrook, ornamental iron in Fairmount and Ryan Place, and mid-century ranch gates in Wedgwood. That means fewer return trips and faster turnarounds for the neighborhoods we serve.

Our Gate Repair Services in Fort Worth

Electric Gate Repair

Fort Worth’s ice storms and 100°F summers are hard on electric gate components. February 2021’s freeze burned out countless automatic opener motors when control boards kept sending power to gates frozen solid at the hinges. We diagnose the whole system: motor, control board, photo eyes, safety edges, and wiring. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry boards and capacitors for the older units still running across Fort Worth.

Automatic Gate Repair

When an automatic gate in Fort Worth binds at the latch point in July, expansion is usually the culprit. Metal frames grow in triple-digit heat, and the gate that closed fine in April trips the opener’s force limits by August. We reset limits, realign tracks, adjust safety photocells, and when the true cause is a shifted post, we address that first. Replacing the opener before fixing the post means another callback when the next rain settles the ground.

Hinge & Post Repair

On-site welding is what keeps this company honest. We cut out the rotted or stripped hinge plates, weld in new steel, and reset posts in deeper concrete footings where the old one has failed. For aging wrought-iron gates in Fairmount and Ryan Place, we match hinge patterns and hardware profiles so the repair doesn’t look like a patch job. For heavy ranch gates west of Loop 820, we size the hinge barrels to the actual gate weight instead of guessing.

Gate Realignment

A gate that drags on the ground or misses the latch receiver is out of square, and in Fort Worth the cause is nearly always post movement in expansive clay. We measure the frame, re-hang the gate on corrected hinges, and shim or reset posts as needed. On older subdivisions where the original posts were set shallow, we’ll often recommend a deeper footer. That’s the difference between a repair that lasts one rainy season and one that lasts a decade.

Trusted Brands We Service in Fort Worth

We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. We stock local parts for Fort Worth customers rather than ordering everything from out of state, which is why we can often complete a same-week repair on equipment a national company would have to ship parts for. If your gate operator is older and the control board is obsolete, we’ll tell you honestly what can be retrofitted and what should be replaced, with numbers for both options in writing.

Common Gate Repair Problems We See in Fort Worth Homes

• Posts heaving in Blackland Prairie clay. The most common failure in Fort Worth. Decades of wet/dry cycles tilt posts outward until the latch misses by an inch and the opener stalls.
• Ice-storm hinge freeze and snapped arms. Severe sleet events like February 2021 freeze hinges solid. Homeowners who force the opener against ice burn out motors or snap rack-and-pinion gears on slide gates.
• Metal expansion causing summer binding. When temperatures run above 100°F for weeks, steel frames expand and the gate binds at the latch point. This trips force limits and safety photo cells alike.
• Rusted-through hinge plates on older ornamental iron. Many Fairmount and Ryan Place gates date from the 1920s and ’30s. The hinges were never meant to last a century, but with on-site welding we can replace them without replacing the gate.

Pricing for Gate Repair in Fort Worth, TX

We Also Serve Cities Near Fort Worth

Our crews work Fort Worth daily and also cover Haltom City, North Richland Hills, Hurst, and Kennedale. If you’re just outside the city, you get the same pricing, the same 90-Day Done Right Promise, and the same trip-charge waiver inside the county.

FAQs - Gate Repair in Fort Worth

Call Gatewood Fence & Gate for Fort Worth Gate Repair

You can keep chasing a gate that won’t close or you can call the person whose name is on the shop. Hal Gatewood has owned this company since 2001, serves Fort Worth directly from the Dallas-Fort Worth metro office, and stands behind every job with the 90-Day Done Right Promise in writing. Call (817) 241-4067 now. A live person answers, the estimate is free, and the price is agreed before any work starts. If it’s not done right, one call brings Hal back. That’s the whole deal.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.