Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Colleyville, TX | Gatewood Fence & Gate
We provide Gate Repair in Colleyville for Ghost Controls openers all over the area, and we do it as an independent shop, not a factory-authorized dealer. That matters more than you’d think. It means we fix what the motor is actually doing, not what a warranty script says to check. If you’ve got a Ghost Controls opener that’s grinding, reversing mid-cycle, or just quit, call (817) 241-4067 and tell us what it’s doing.
Colleyville has an unusual number of aging estate gates compared to the cities around it, and Ghost Controls equipment is common on those older automated entries. Our crew works on those systems regularly enough that we stock boards, arms, and receivers for same-visit fixes on most calls. We’re Ghost Controls sales & service specialists as far as the hardware goes, and we’ve been elbow-deep in it since before most smart-gate tech existed.
Why Colleyville Residents Choose Us for Ghost Controls Service
Hal Gatewood started this shop in 2001, back when a Ghost Controls opener was more likely to be on a ranch gate in Wise County than a custom iron entry in Colleyville. He learned the brand the same way he learned welding: by taking things apart, figuring out what failed, and putting them back together stronger. That’s still how we work.
We’re local to the area, and we treat Colleyville differently than a contractor coming up from Dallas would. The soil here shifts. The sun cooks batteries. The gates are heavier than the original openers were ever rated for. We know that before we even pull into the driveway, because we’ve fixed the same failure three streets over the week before.
Parts-wise, we install genuine Ghost Controls boards and arms when the homeowner wants the exact OEM match and no rewiring changes. But for failed solar batteries, limit switches, and plastic drive gears, we often use upgraded aftermarket equivalents that hold up better in Texas heat. We’ll tell you which is which and why, before you spend a dollar.
Common Ghost Controls Gate Repair Problems We Solve in Colleyville
- AXDP arms stripping plastic drive gears: This happens when a homeowner upgrades from a light aluminum gate to a heavy wrought-iron panel, often 200+ lbs over the opener’s rating. In Colleyville, where custom 600-lb iron leaves aren’t unusual, we see this constantly. The gear strips, the motor spins, and the gate just sits there.
- Limit switches burning out on AXDP boards: Short cycling, where the gate opens and closes repeatedly, burns these switches. Then the gate slams against brick pillars instead of stopping clean. Colleyville’s custom entries have those pillars everywhere, and a slamming gate cracks mortar fast.
- TSS1 and TSS1G solar systems killing batteries in summer: The heat is brutal on SLA batteries. The built-in charge controller overcharges, the battery bulges, and the panel’s input dies. By July, a Colleyville solar gate that worked fine in March is dead as a doornail.
- DSL1 slide gate receivers dropping remote signal: A nearby cell tower upgrades, a neighborhood mesh network changes frequency, and suddenly the handheld remotes won’t open the gate but the keypad still works. That’s a receiver board swap, not a reprogramming job. We’ve seen it happen more in the last two years than the decade before.
- Clay heave throwing limits out of alignment: Colleyville sits on Blackland Prairie clay that swells and shrinks with every rain and drought cycle. When gate posts shift even a half inch, the Ghost Controls limit switches don’t register the closed position correctly. The gate opens partway, then reverses like it hit something.
Ghost Controls Service in Colleyville: What Local Conditions Mean for Your Equipment
Here’s the thing about Colleyville that a generic Ghost Controls page won’t tell you: the city’s 1990s-era gate posts were set with shallow concrete footings sized for the original lightweight gates. Blackland Prairie clay doesn’t care about anyone’s original specs. When it heaves after a wet spring, those posts shift. We’re not talking dramatic visible tilting; we’re talking the kind of quarter-inch movement that throws a Ghost Controls swing arm’s limit switch out of sync. The opener thinks the gate is closed when it’s still six inches from the pillar, or it thinks it’s obstructed and reverses when it should stop.
We see this in Colleyville’s older divisions, like portions of McDonwell Estates, far more than we do in Bedford or Grapevine. The soil difference is real, but so is the age difference: Colleyville’s primary residential build-out happened earlier than those cities, and the gate hardware is that much older. Ghost Controls openers from the early 2000s are now hitting the end of their service life right as the clay underneath them is doing its worst work. It’s a one-two punch.
Ghost Controls Models & Products We Service in Colleyville
We work on the full Ghost Controls line: the AXDP series, including AXDP2 and AXDP3 single and dual swing arm kits; the TSS1 and TSS1G solar single swing openers; the DSL1 and DSL1G slide gate openers; and the FP1 wireless keypad along with Mighty Mule-style accessory kits that share the same lineage.
Our parts philosophy is simple. When the client wants no rewiring changes and an exact drop-in, we install genuine Ghost Controls boards and arms. When the OEM part has a known failure mode that heat makes worse, like solar batteries and plastic gears, we go with upgraded aftermarket equivalents that outlast the original. And when a Ghost Controls arm has stripped gears on a gate over 400 lbs, we say it plain: replacing a $300 gear on an undersized motor is throwing good money after bad. The right fix is a properly sized opener, and we’ll quote it honestly.
Ghost Controls Service Pricing in Colleyville
Every Ghost Controls repair gets a written price before we start, and that number doesn’t change when the job’s done. We don’t play the quote low, bill high game. If we find something else wrong while we’re working, we stop and tell you, with a new number, before we touch it.
- Service call and diagnosis: No trip charge inside the county. We come out, figure out what’s failing, and give you a written estimate.
- Limit switch replacement: Typically $180-$280, depending on the board revision and whether we’re also realigning the arm.
- Receiver board swap on DSL1 units: Usually $200-$320.
- Plastic gear to steel gear conversion on AXDP arms: Generally $250-$400 per arm, including installation and realignment.
- Battery backup addition: $300-$600, depending on whether you want a solar-ready setup or a simple trickle-charge backup.
- Full opener replacement: $700-$1,800, depending on gate weight, arm configuration, and whether we’re keeping the existing posts or setting new ones.
Two things to remember: we take $40 off any repair over $200, and seniors and veterans always get 10% off, permanently. Call (817) 241-4067 for an exact quote; estimates are free.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Colleyville
Because your gate post has shifted and the limit switch no longer reads the closed position correctly. After rain, Blackland Prairie clay swells and that’s when the misalignment shows up. In Colleyville’s older divisions, we see this pattern every wet spring. The fix is a realignment of the arm and post, plus a limit switch adjustment or replacement if the switch itself is burned. Call (817) 241-4067 and we’ll diagnose it on site.
We absolutely will not. Not because we don’t want the work, but because a 600-lb gate on a motor rated for 300 lbs strips the plastic gear in a year, sometimes less. We’ve pulled enough of those arms out of Colleyville driveways to know exactly how that story ends. If your gate is over the rating, a properly sized linear or slide motor is the honest fix, and we’ll quote it that way.
The Texas heat kills SLA batteries, and the built-in charge controller on TSS1 and TSS1G systems overcharges as the battery degrades. The battery bulges, the panel’s input circuit fails, and by mid-summer the gate goes dead. We replace the battery with an upgraded deep-cycle unit that handles heat better, and we test the charge controller before we wrap up. Call (817) 241-4067 for a solar repair quote; estimates are free.
No. If the keypad works and the remote doesn’t, the battery isn’t the problem. It’s the receiver board in the DSL1 unit drifting off frequency after a nearby cell tower or mesh network changed channels. The fix is a receiver board swap, not reprogramming, and not a new remote. We stock those boards and can usually handle it in one visit. Call (817) 241-4067 to schedule the swap.
Yes, and it’s one of the better upgrades for Colleyville homeowners, where ice storms knock out power and leave heavy gates stuck closed. We recommend our Gate Installation in Colleyville team for this add-on. We can add a trickle-charge battery backup to an existing AXDP or DSL1 opener without rewiring the whole system. It keeps the gate working through short outages and takes the pressure off the opener’s power supply. Call (817) 241-4067 for a free estimate; we’ll tell you what the install would cost before you agree to anything.
Service Areas Near Colleyville
We run Ghost Controls service across Colleyville and into the surrounding cities: Fort Worth, North Richland Hills, Hurst, Kennedale, and Keller. If you’re in Colleyville service area proper, we’re already nearby. If you’re just across the city line, we cover Ghost Controls service in North Richland Hills and Ghost Controls service in Fort Worth as well.
Book Your Ghost Controls Service in Colleyville Today
Give me a call, that’s my real number, and I’ll pick up. If it’s an emergency and we’re free, we’ll be out same day. Otherwise, we’ll set a time and show up when we said we would. (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.