Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Bedford
Gate access control in Bedford usually comes down to one of two things: an operator board that has finally given up after three or four Texas summers, or a gate post that has drifted so far out of plumb in the clay that the latch no longer lines up. Either way, the fix is rarely the keypad you were about to order online. We’ve been out to Bedford homes along Harwood Road, through the neighborhoods behind Central Drive, and up toward the Colleyville line enough times to know the pattern before we even back the truck in. Call (817) 241-4067 and a live person answers, day or night. We schedule fast, and we won’t sell you a part your gate doesn’t need.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That matters in a city like Bedford, where the houses are close together, the neighbors talk, and a bad gate job gets found out fast. We don’t hide behind a call center or a rotating crew of strangers. The person who answers the phone knows gates. The person who shows up to your driveway is background-checked and uniformed, and in a lot of cases that person is Hal himself.
Bedford homeowners have a particular problem: their gates are old. Not “a few years old.” Thirty, forty, fifty years old. Most of the gate operators still running in this city were installed before modern safety photocell requirements even existed. That means generic advice doesn’t work here. You need someone who can look at a 1987 opener and tell you honestly whether it can be retrofitted to current standards or whether you’re spending good money after bad. That’s exactly what we do. And every job carries our 90-Day Done Right Promise, in writing, not as a sales pitch.
Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and we answer calls around the clock. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Permanent 10% discount for seniors and veterans. These aren’t gimmicks. They’re just the way Hal has always done business.
Our Gate Access Control Services in Bedford
Keypad Entry
Bedford’s older wood and wrought-iron gates often have keypads that were installed when the house was built, and they’re tired. Worn buttons, cracked housings, terminals corroded by decades of North Texas humidity swings. We can replace the keypad, but more importantly, we check what the keypad talks to. If the operator board behind it is a legacy unit from the 1980s or 1990s, a brand-new keypad won’t fix sporadic refusal to open. We test the whole chain before we sell you anything. Typical keypad replacement in Bedford runs $180-$340 installed, depending on whether we’re wiring in a simple standalone pad or a full system retrofit.
Remote Control
Most Bedford driveway gates use either dip-switch remotes or rolling-code remotes. If your remote only works when you’re standing right next to the gate, the receiver antenna may be the problem, or the receiver itself is a 30-year-old unit that’s drifted off frequency. We stock remotes and receivers compatible with Linear, Ghost Controls, Viking, and DoorKing systems, and we can program replacements on site. A new remote and receiver setup in Bedford typically runs $120-$220.
Phone Entry
Phone entry systems let you buzz open the gate from your cell phone or add a landline-style intercom at the gate. This is a common upgrade for Bedford homeowners whose gates were built before cell phones existed, let alone smart entry. We can retrofit most operators with a cellular phone-entry module so you don’t have to run new wiring to the house. A phone entry add-on in Bedford generally runs $350-$600 installed.
Card Reader
For Bedford homes with service access needs or multiple vehicles, a card or fob reader can be added to most existing operators. If your gate has an older DoorKing or Linear board that won’t accept a modern Wiegand reader, we don’t rip the whole system out. We look at the board first. Sometimes a daughter board or an update is available. If not, we’ll tell you plainly, and we’ll quote you a new operator only if it’s genuinely cheaper than fighting the old one. Card reader retrofits run $300-$550 on average, plus the control board work if needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We’re certified to service nine major gate brands, and we keep parts on the truck for the ones we see most in Bedford: Linear, Viking, Ghost Controls, and DoorKing. That means when we open your operator housing and find a blown control board, we often have the replacement with us, not “ordered and back next week.” We also service LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If your gate says a brand name on it, odds are we’ve opened one up this month.
Common Gate Access Control Problems We See in Bedford Homes
- Legacy control boards refusing safety inputs. Boards from the 1980s and 1990s were never designed for modern UL 325 entrapment protection. They’ll intermittently refuse to open or close, or throw a fault code that no longer matches anything in the manual. A new keypad won’t touch this problem.
- Hinge posts heaved out of plumb by Blackland Prairie clay. Bedford sits on some of the most expansive clay in North Texas. It swells in wet winters and shrinks in summer droughts. Your hinge post leans, the gate drags, the latch misses the strike, and the access system reports a false obstruction. No operator adjustment fixes a post that isn’t standing where it was set.
- Mature tree roots lifting footings. In Bedford’s older neighborhoods, those post oaks and cedar elms have had 40-plus years to push roots under fence lines. Roots lift post footings and crack concrete collars. We have fixed more gate openings after digging out a root-bound post than we can count.
- Hard-freeze and heat fatigue on gates already weak from soil movement. North Texas freezes crack wood and seize metal hinges. Hundred-degree summers cook control boards inside their housings. Bedford’s gates take both, year after year, on top of the soil movement. Hardware fatigue is cumulative, and eventually something gives.
Pricing for Gate Access Control in Bedford, TX
Here are real numbers for the Bedford market, not vague ranges that leave you guessing. A typical keypad replacement runs $180-$340. Remote and receiver replacement runs $120-$220. Phone entry modules run $350-$600. Card reader retrofits run $300-$550, plus any board work. A legacy control board replacement, which is the single most common access-control repair we do in Bedford, runs $260-$480 depending on the operator and whether we’re updating the safety photocell circuit at the same time. Full video intercom retrofits run $700-$1,200. Every job is quoted and agreed in writing before we start. What we quote is what you pay. Call (817) 241-4067 and we’ll give you a number over the phone, then stand behind it when we arrive.
We Also Serve Cities Near Bedford
Our crews work Bedford and the surrounding Mid-Cities every week. If you’re in Bedford, Colleyville, Hurst, North Richland Hills, or Haltom City, we’ll come to you. Same local knowledge, same upfront pricing, same 90-Day Done Right Promise on every job. For more on what we do, see our Gate Access Control services page.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Bedford
Because the soil under the hinge post is moving more than the keypad ever will. Wet winters swell Blackland Prairie clay and can actually push the gate back into better alignment. Summer drought shrinks the clay, the post drops or leans, the latch misses the strike, and the system reads it as a fault. The keypad was never the problem. Call (817) 241-4067 and we’ll check the post before we touch the electronics.
Usually yes, if the operator housing and motor are still sound. We replace the legacy control board with a current UL 325-compliant unit and add non-contact photocell sensors at the pinch points. If the old operator is too far gone, we’ll tell you straight, and a new operator may be the cheaper answer long-term. Either way, you’ll know the exact price before any work starts.
In Bedford, that’s almost always a post or track issue. The clay shifts, the slide track binds, and the operator’s obstruction circuit reads the drag as something in the gate’s path and reverses it. A new remote can’t fix a track that’s out of level. We check the track, the rollers, and the soil under the posts before we touch the operator. Call us and we’ll find the real cause.
Yes, with one condition: the gate structure has to be straight first. A video intercom doesn’t help you if the gate won’t open reliably because the post has moved. Once the gate swings or slides true, adding a video intercom gives you real value. You can see who’s at the gate from your phone and open it remotely. Retrofits on Bedford’s older wood gates run $700-$1,200, and we handle the power run and the mounting so the gate still looks like it belongs to the house.
Many legacy operators can accept a card reader through a retrofit board or a compatible receiver interface. We don’t know until we open the housing and look at the board. If the board supports it, we add it. If it doesn’t, we’ll show you the old board, tell you what a replacement board costs versus a new operator, and let you decide with real numbers in front of you. Estimates are free.
Key Takeaways:
- Most Bedford gate access problems are structural (post movement) or electrical (obsolete boards), not failed keypads.
- Bedford’s aging 1970s-1990s housing stock means legacy operators dominate the repair call volume.
- We service Linear, Viking, Ghost Controls, and DoorKing systems, among others, with parts on the truck.
- Every job is priced in writing before we start. No trip charge inside the county. $40 off repairs over $200.
- 90-Day Done Right Promise, in writing, on every job.
If your Bedford gate is acting up, don’t start replacing parts and hoping. Call (817) 241-4067 and talk to someone who has been fixing gates in this part of Texas since 2001. We’ll come out, look at the gate, tell you what’s actually wrong, and give you a price you can hold us to. Estimates are free. The person who answers the phone will be the person who stands behind the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford since 2001.