Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bedford
A sagging gate in Bedford is rarely just a hinge problem. It’s usually the post heaving in Blackland Prairie clay, or a 40-year-old post oak root lifting the footing out of the ground. That’s why gate repair in Bedford starts with the post, not the panel. Gatewood Fence & Gate has been fixing gates in this city since Hal Gatewood hung his shingle in 2001, and we answer the phone around the clock. Call (817) 241-4067 and a live person picks up, not a queue in another time zone.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Repair Company
Hal’s name is on the shop and on every invoice. That’s a small thing, but in a city where most gates were hung when Jimmy Carter or George H.W. Bush was in office, it matters. Bedford homeowners have watched national outfits send a different subcontractor every visit. We don’t work that way. The person who walks your gate line is the person whose reputation hangs on fixing it right.
We’ve repaired thousands of gates across Bedford, mostly in those 1970s and 1980s neighborhoods between Harwood Road and Central Drive, where the houses are solid but the gate infrastructure has been quietly failing for a decade. When a Bedford customer calls about a dragging gate, we already know what we’re likely to find before we pull into the driveway. That kind of local familiarity isn’t something a franchise can replicate.
Response time to Bedford is fast, and our crews know the streets, the soil, and the specific failures that show up on gates hung before modern safety standards existed. We stand behind every job with the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back.
Our Gate Repair Services in Bedford
Hinge & Post Repair
Most Bedford gate repairs come down to one thing: the hinge post has moved. North Texas clay swells in wet winters and shrinks in August droughts, and over 30 years that’s thousands of heave-settle cycles working against your post footing. We dig out the displaced footing, repour concrete clear of root intrusion, and set the post back to plumb. Then we rehang the gate so it actually swings instead of dragging. Call Gate Repair team at (817) 241-4067 and we’ll give you an honest read on whether the post can be reset or whether the footing itself is shot.
Gate Realignment
A gate that scrapes the driveway or won’t latch is almost always out of alignment at the hinge, not the free edge. Homeowners tighten hinges, shim the latch plate, maybe replace the latch itself, and the gate sags again within a season. In Bedford, where most posts were set in the 1970s through the 1990s without the root barriers common in newer construction, realignment usually means lifting the post, not just adjusting hardware. We do it once and the gate holds.
Electric Gate Repair
Electric gates in Bedford’s established neighborhoods are often running on legacy operators from the 1980s and 1990s. Those old LiftMaster and Viking boards were built before UL 325 entrapment protection became standard, and when they fail, they fail in ways that are genuinely unsafe. Hal can retrofit most legacy operators with modern control boards and safety photocells, so the gate stays in service without a full replacement. If the operator is too far gone, we’ll tell you straight and quote a replacement on the existing posts, which saves money and keeps the gate swinging on the same track the driveway already expects.
Automatic Gate Repair
Automatic gates in Bedford fail for two reasons: the post shifts and the operator fights the misalignment until the gears strip, or the control board gives out after 25 years of Texas summers. We diagnose the true cause before we touch a single component. Fix the post without the control board and you’ll fix it twice. Show us a gate closing on its own and we’ll show you where it’s failing. We service Gate Repair for operators from Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry parts for all of them locally.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We’re certified to work on nine major gate brands, and we stock parts locally for the ones Bedford homeowners actually have: Ghost Controls, DoorKing, Elite, and Mighty Mule show up most often in this part of the Mid-Cities. When you call us for an automatic gate repair in Bedford, we’re not waiting a week on a control board from a warehouse in California. We keep common boards, photo eyes, and receiver modules on hand, and if a part isn’t in the truck, our Dallas-Fort Worth office has it on a shelf, not on backorder.
Common Gate Repair Problems We See in Bedford Homes
- Root-lifted post footings – Mature post oaks and cedar elms planted in the 1970s and 1980s have pushed surface roots under fence lines across Bedford. Those roots crack concrete footings and lift posts out of the ground. No hinge adjustment fixes a sagging gate until the footing is repaired.
- Heaved hinge posts from shrink-swell clay – Bedford sits on Blackland Prairie clay. Wet winters swell it; summer droughts shrink it. Every rain-drought cycle torques gate posts a fraction more, and after 40 years the gate drops, the latch misses the striker, and the gate drags a half-inch channel into the driveway.
- Legacy operator control boards from the pre-UL 325 era – Automatic gates installed in the 1980s and 1990s often lack modern entrapment sensors. The boards fail, and when they do, the gate may reverse unpredictably or hang. We retrofit what’s worth retrofitting and tell you straight when a new operator is the cheaper answer.
- Frozen hinges and cracked wood from hard freezes – North Texas ice storms and hard freezes aren’t constant, but when they hit, they crack cedar and pine wood gates and seize metal hinges. Add 100°F afternoons on top of cracked wood and a tired post, and the gate gives up. Bedford sees this cycle every year.
Pricing for Gate Repair in Bedford, TX
Here’s what Bedford homeowners can expect, in plain numbers. A hinge post reset with new concrete typically runs $280-$450 depending on root intrusion and how deep the footing goes. Full gate realignment, including pulling the post and rehanging the panel, lands between $220-$400. Electric gate repairs on LM-style operators run $190-$380 for control board replacement or retrofit; automatic gate repairs involving both the operator and the post sit at $350-$700. Weld and rust repair on wrought-iron gates runs $150-$500 depending on how much of the post base is rotted through.
The price we quote before the work starts is the price on the invoice. No trip charge inside the county, and $40 off any repair over $200. If you’ve got a written estimate from another company, bring it to us and we’ll give you a second opinion free. Call (817) 241-4067 for an exact quote, and we’ll show up when we say we will.
We Also Serve Cities Near Bedford
We work in Bedford every day, and we cover the surrounding Mid-Cities too: Colleyville, Hurst, North Richland Hills, and Haltom City. If you’re in those areas, you get the same live answer, the same straightforward pricing, and the same guy whose name is on the invoice. Learn more about Gate Repair in Bedford and how we handle this part of Texas.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bedford
The post is moving, not the gate. Bedford’s clay soil heaves posts out of plumb every wet-dry cycle, and if an oak or elm root is under the footing, it’s lifting the post even higher. Hinge tightening just chases the problem. The fix is digging out the footing, repouring clear of root intrusion, and rehanging the gate once the post stays put. Call (817) 241-4067 and we’ll diagnose it before you spend another Saturday with a wrench.
Yes, in most cases. Older operators from the 1990s can often accept modern photo eyes and a current UL 325-compliant control board without replacing the entire operator or the gate itself. We’ll evaluate the wiring and motor condition first. If the operator is too far gone to safely retrofit, we’ll tell you that too and quote a new one on your existing posts, which keeps the cost down.
If the post footings are cracked and root-lifted, the post bases are rotting through at grade, or the operator lacks any modern entrapment protection and the gear train is worn out, a full replacement is usually the cheaper answer by the second or third repair. We’ll give you that honest math on the spot. Hal would rather tell you the gate is done than take your money fixing a hinge on a panel that’s about to fall off its post. Call (817) 241-4067 for a straight answer.
That’s the signature of shrink-swell clay. Summer drought pulls moisture from the soil, the ground contracts, and the post drops or tilts just enough that the free edge scrapes. After a good rain, the clay swells and temporarily lifts the post back to something close to level. The pattern never gets better on its own. The permanent fix is resetting the post on a properly deep footing with good drainage.
We repair both. Slide gates in Bedford are more common on later-era homes and some of the larger properties near the city’s eastern edge, and they have their own failure modes: worn rollers, bent track from clay movement, and motor overloads from misalignment. Same process: we diagnose the true cause, fix the post or track first, then rehang and retune the operator. Call (817) 241-4067 for a free estimate, no trip charge inside Tarrant County.
Contact Gatewood Fence & Gate - If your gate is sagging, dragging, or refusing to open, call (817) 241-4067 now. Hal or one of his crew will answer. We’ll show up when we promise, quote the real number before any work begins, and stand behind the repair with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford and the Mid-Cities since 2001.