Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
A new driveway gate or swing gate in Bedford, TX typically runs $1,800 to $4,600 installed, depending on whether we’re starting from fresh ground or rebuilding a post footing that’s been pushed out of plumb by North Texas clay. Most Bedford installations take one to two days once materials are on hand, and we quote the full price before any work starts. Hal Gatewood has been doing this since 2001, and the name is on the shop, not a franchise. If you’re anywhere near Harwood Road, Brown Trail, or Pipeline Road, call (817) 241-4067 and a live person answers.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Installation Company
Bedford is fully built-out. That changes how gate work gets done here. Most homes along Central Drive and Forest Ridge were platted between 1970 and 1995, and their gates are hitting end of life together. We’re not driving past new subdivisions to get to you, we’re working streets where the post oaks have had forty years to root under the fence line. That’s the work we do every week.
Our Gate Installation team shows up with welding gear on the truck because a Bedford gate rarely dies alone. Usually the operator quit, the hinge post moved, and the panel has been dragging for a year. We fix the whole thing in place so you’re not paying twice.
How Fast Can We Get to Bedford?
Our crews serve Bedford directly from our Dallas-Fort Worth operation, and most jobs are scheduled within a few business days. When you call, you talk to a person who knows the difference between a gate off Harwood Road and one off Cheek-Sparger Road. There’s no automated phone tree, and nobody asks you to press 4 for a callback.
What Bedford Homeowners Tell Us
The recurring theme in Bedford is relief that somebody actually showed up. Our customers know the difference between a company that sends a salesperson with a tablet and a crew that pulls up with a welder and a rack of FAAC parts. Hal Gatewood’s name is on every invoice, and the 90-Day Done Right Promise is in writing. If it’s not done right, one call brings us back.
Our Gate Installation Services in Bedford
Before we quote anything, we put eyes on the post footings. In Bedford, that’s where the problem lives. The panel and the operator ride on whatever the post is doing, and Blackland Prairie clay keeps the post moving. Here’s what we typically install across the city:
Driveway Gate Installation
Most Bedford driveway gates are full-height ornamental wrought iron or wood, often a double swing. A new manual driveway gate with proper posts runs $2,200 to $4,600, and adding automation pushes it toward $3,800 to $6,200 with the operator, keypad, and safety edges included. We size the operator for the actual gate weight and wind load, not the box on the shelf at a big-box store.
Pedestrian Gate Installation
Pedestrian gates in Bedford are usually the first thing to sag because they’re narrow, tall, and mounted between a house brick wall and a wood fence post that’s been heaving for thirty years. A new steel-frame pedestrian gate runs $900 to $1,800 installed, including the post set in concrete below the frost line and clear of surface roots. We also add self-closing hinges and latch hardware that doesn’t freeze shut when a hard freeze rolls through.
Sliding Gate Installation
Sliding gates need a flat, level track, and Bedford’s clay soil fights that. We pour a reinforced concrete track bed with proper drainage so summer drought cracks don’t throw the gate off its wheels. A typical sliding gate installation runs $2,800 to $5,500 depending on width and finish. If your lot slopes toward the street, we’ll tell you before we dig, because the track has to account for that grade.
Swing Gate Installation
Swing gates are the most common in Bedford’s older subdivisions, and they fail most visibly. A double swing gate with wrought-iron panels and new steel posts runs $2,000 to $4,200 installed. The hinge post is the load-bearing member, and in Bedford it’s very often sitting in clay that’s been expanding and contracting for decades. We don’t just hang the gate, we reset the post in a deeper footing and check it for plumb in two directions before the concrete sets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We install and service operators from FAAC, DoorKing, Elite, and Ghost Controls, along with LiftMaster and several others. Our crew is brand-certified on the systems we install, and we carry parts for the common Bedford callouts so a failed control board doesn’t mean three weeks of waiting on a delivery. If your gate has a builder-grade operator that’s underpowered for the panel, we’ll tell you, and we’ll put a properly sized replacement in its place.
Common Gate Installation Problems We See in Bedford Homes
- Builder-grade operators that quit under load. The original operator was often sized for a lightweight aluminum gate, then somebody hung a full cedar panel on it. Within a few years, the motor burns out. In Bedford’s 1970s and 1980s subdivisions, this is routine.
- Manual gates automated without conduit. A gate that was installed manual usually has no underground power run or conduit for loop detectors and keypads. Surface-mounted retrofits look bad and fail in the first hard freeze. We trench and run conduit properly, even when the driveway is finished.
- Sagging hinges misread as panel problems. The panel itself is rarely the issue. In Bedford, the hinge post footing has usually been pushed out of plumb by expansive clay and tree roots. Adjusting hinges is a temporary band-aid. We dig out the footing, remove root intrusion, and pour it level.
- Root heave under gate posts. Mature post oaks and cedar elms in Bedford’s established neighborhoods have had decades to push roots under fence lines. Those roots lift post footings and crack concrete collars. No hinge adjustment fixes that. The footing comes out, the root is cleared, and the post gets set fresh.
Pricing for Gate Installation in Bedford, TX
Here’s what Bedford homeowners can expect:
- Pedestrian gate, steel frame: $900 - $1,800
- Single swing gate, manual: $1,800 - $3,200
- Double swing gate, manual: $2,000 - $4,200
- Sliding gate, manual: $2,800 - $5,500
- Adding automation to an existing gate: $1,200 - $2,800 (operator, safety edges, keypad, and power run)
- Post reset and gate realignment: $600 - $1,400 (when the footing has heaved or been root-lifted)
Every quote is written and agreed before we start. If you have another company’s written estimate, we’ll give you a free second opinion on it. We don’t charge a trip fee anywhere inside the county. Seniors and veterans get a standing 10% discount. Call (817) 241-4067 and ask for the Bedford gate installer.
We Also Serve Cities Near Bedford
Our crews also run gate installation jobs in Colleyville, Hurst, North Richland Hills, and Haltom City. If you’re on the north side of Bedford toward Hurst or down toward the HEB district line, the same locally owned operation covers you. We don’t hand your job to a subcontractor half a state away.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
In Bedford, you’re almost never starting from empty dirt. The gate, posts, and underground conditions have been sitting in Blackland Prairie clay for thirty to fifty years, and everything has moved. New-construction suburbs still have undisturbed soil and fresh post holes. In Bedford, we’re usually rebuilding a footing, re-aligning a post, or trenching new conduit through an established yard before we ever mount the operator. Call (817) 241-4067 and we’ll tell you exactly what your site needs after looking at it.
Yes, and we do it routinely in Bedford. The main issue is that most manual gates were installed with no underground conduit or power run. We trench a code-compliant line, add a weatherproof junction box, and install the operator, safety edges, and a keypad or loop detector. If the hinge post is plumb and the gate swings freely, automation is straightforward. If the post has heaved, that gets fixed first, because a motor on a dragging gate burns out fast. Call (817) 241-4067 for a free look at your setup.
If a Bedford gate sags within a season of installation, the post footing was almost certainly set too shallow or poured with clay contamination. North Texas clay expands significantly in wet winters and shrinks in summer drought. A footing that isn’t deep enough or wasn’t keyed into stable soil will move with it. We dig footings below the active clay zone, use steel-reinforced concrete, and clear root intrusion before pouring. If a gate we installed moves, the 90-Day Done Right Promise covers it. Call (817) 241-4067 and we’ll come look.
A loop detector is the best way to automate exit and entry for a driveway gate because it senses a vehicle without anyone touching a keypad or remote. In Bedford’s older subdivisions, many driveways are narrow and short, which makes inverse loops especially useful for exit safety. We recommend a loop detector for most automatic driveway gates, and we install them with the conduit and wiring done correctly the first time. Call (817) 241-4067 to talk through your driveway layout.
We install automatic gates with the safety features required by current standards, including monitored safety edges, photoelectric sensors where applicable, and proper force settings so the gate reverses on obstruction. We follow UL 325 compliance for residential gate operators and test the gate’s entrapment protection after installation. You don’t have to know the code, that’s our job. Call (817) 241-4067 and we’ll walk you through what your specific gate needs.
Call Gatewood Fence & Gate for Gate Installation in Bedford, TX
If your Bedford gate is dragging, sagging, or the operator gave up, call (817) 241-4067. Hal Gatewood has been at this since 2001, the shop address is published, and a live person answers the phone around the clock. We quote the full price before we start, we weld on site, and every job carries the 90-Day Done Right Promise in writing. You can call us at midnight or drive to the shop and look us in the eye. Either way, you’ll get the same answer: we’ll show up and get it done.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford and the Mid-Cities since 2001.