Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Haltom City
Gate access control in Haltom City means keypads, remotes, phone entry systems, card readers, and video intercoms installed and serviced on gates that have to keep working every single day. Whether you’re running a salvage yard off Denton Highway or you’ve got a chain-link swing gate on a 1960s ranch lot, we handle the wiring, the programming, and the repair. Call (817) 241-4067 and a live person answers, any hour. We’ve been at this since 2001, and we know Haltom City’s mix of residential and industrial gates better than any out-of-town outfit ever will.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Access Control Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When a Haltom City customer calls about a keypad that quit reading codes or a slide gate creeping open at 2 a.m., the person who shows up works for Hal, not a faceless national brand. We’ve earned our reputation in Tarrant County one gate at a time, and our 90-Day Done Right Promise comes in writing on every job. If it isn’t done right, one call brings us back. No runaround, no fine print.
We answer the phone with a live person around the clock, seven days a week. No voicemail tree, no call center three states away. When you call about a gate access control problem in Haltom City, you talk to someone who knows what a Vertisol clay heave does to a hinge post. Our crew serves Haltom City locally, coordinated from our Dallas-Fort Worth office. Background-checked, uniformed, and certified on nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
We also stock parts locally for the brands Haltom City actually uses. That means a failed FAAC control board or a dead Linear remote doesn’t leave your driveway gate dead for two weeks while someone orders from a warehouse in another state. We keep common boards, remotes, keypads, and safety photocells on the truck.
Our Gate Access Control Services in Haltom City
This page focuses on the access control side of things. For a full look at what we cover, see our Gate Access Control page. Here in Haltom City, we handle the specific access systems that keep your gate doing what it should.
Keypad Entry
Keypad entry is the workhorse in Haltom City, and for good reason. On the residential side, a keypad on a post beside a 1950s chain-link swing gate lets you come and go without hunting for a remote. On the commercial side, a keypad gives loading crews and tenants access without cloning remotes. We install and program wired and wireless keypads from Linear, DoorKing, and Viking, and we fix the common Haltom City failure: a post that heaved in the clay and pulled the keypad wiring loose or cocked the mounting bracket so codes enter wrong. The price is quoted and agreed before we start, every time.
Remote Control
Remote control keeps being the simplest fix for residential and light commercial gates in Haltom City. We program new remotes, replace dead receivers, and sync multi-button remotes so one click opens the pedestrian gate and the driveway gate separately. Haltom City’s older ranch homes often have two or three remotes floating around from previous owners, with one that works only when the moon is right. We can clean that up in one visit.
Phone Entry
Phone entry systems make sense for Haltom City’s mixed blocks, where a shared driveway or right of way means the gate needs to open for a tenant, a delivery driver, or a relative checking on the house while you’re out of town. We install and service phone entry units that dial your cell when someone presses the call button, then you press a key to open the gate. For a commercial driveway off Carson Street, a phone entry system beats handing out gate codes to every vendor who shows up.
Card Reader
Card readers are the quiet workhorse on Haltom City’s industrial side. Auto shops, body yards, and small manufacturers use card or fob entry so employees come and go without punching codes or carrying remotes. We install and maintain card readers, add credentials, and delete lost cards. If your slider on Denton Highway still uses a 1990s key switch, a card reader is a straightforward upgrade that keeps a clean audit trail of who opened the gate and when.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re certified to service nine major gate access control brands, and in Haltom City we see a steady diet of Linear keypads and receivers, Viking operators on older industrial sliders, Ghost Controls solar gear on residential swing gates, and DoorKing phone entry and card reader systems on commercial driveways. Because we service these brands every week, we keep common parts in the truck and on the shelf. That’s the difference between a gate fixed today and a gate waiting on a part.
Common Gate Access Control Problems We See in Haltom City Homes and Businesses
- Keypad codes not opening the gate after a dry summer. The Vertisol clay shrinks, the post leans, the latch alignment shifts, and the keypad’s relay fires but the gate doesn’t budge because the latch is bound. The gate didn’t fail; the ground moved under it. We fix the post, re-hang the gate, and reprogram the keypad so it works in August and April alike.
- 1980s and 1990s slide gate operators running with no entrapment protection. Along Denton Highway and Carson Street, we see chain-drive operators that predate modern safety photocells. A gate that reverses only by hitting something is a liability and a code violation. We retrofit photocells and safety edges, and we replace the operator when it’s beyond service.
- Shared driveways and restricted rights of way forcing sloppy post repairs. When space is tight, a hurried repair misses the footing. In Haltom City, that means a post re-sags within months when the clay re-expands after rain. We dig the footing deeper, set the post plumb, and let concrete cure before we re-hang the gate and re-wire the access control.
- Residential swing gates with corroded hinges and bent latch posts. Postwar chain-link gates on Haltom City ranch lots are sixty or seventy years old. The galvanized pipe frames are often still sound. The hinges, hinge bolts, and latch posts are not. We weld on site and true the post rather than hauling the gate off and selling you a replacement that wasn’t needed.
Pricing for Gate Access Control in Haltom City, TX
A keypad entry install in Haltom City typically runs $285 to $650 depending on wired versus wireless, the operator brand, and whether the post needs to be re-set first. A new remote programmed and synced usually runs $75 to $160 including the remote. Phone entry systems land between $450 and $1,100 for residential, with commercial multi-tenant systems running higher. Card reader installs start around $400 and go up with the number of readers and the operator type. A full commercial slide gate operator upgrade with safety photocells on Denton Highway commonly runs $1,800 to $3,600 parts and labor.
| Service | Typical Haltom City Range |
|---|---|
| Keypad entry install (residential) | $285 - $650 |
| Remote programmed and synced | $75 - $160 |
| Phone entry system (residential) | $450 - $1,100 |
| Card reader install | $400 - $900 per reader |
| Commercial slide operator upgrade with safety photocells | $1,800 - $3,600 |
We quote the price up front and in writing, and that’s the price you pay. No trip charge inside the county. $40 off any repair over $200. A permanent 10% discount for seniors and veterans. And a free second opinion on any written estimate from another company. Call (817) 241-4067 for an exact quote on your Haltom City gate.
We Also Serve Cities Near Haltom City
Our gate access control crews serve Haltom City and the surrounding Tarrant County communities. If you’re nearby in Fort Worth, North Richland Hills, Hurst, or Bedford, we make the same promise: a live person answers the phone, the price is quoted before work begins, and every job carries the 90-Day Done Right Promise in writing.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Haltom City
Your gate doesn’t drag because the gate bent. It drags because the post moved. Tarrant County’s expansive Vertisol clay shrinks during summer drought and swells when rains return, and your hinge post heaves and tilts with it. The fix is to dig the footing deeper, re-set the post plumb, and let the concrete cure before re-hanging the gate and re-aligning the keypad and latch. Call (817) 241-4067 and we’ll do exactly that, for a price agreed before we start.
Yes. We schedule the work around your loading hours, remove the old chain-drive, mount the new operator, add required safety photocells and an edge sensor, and program the new remotes and keypad in a single visit. Your gate is down only long enough to swap the hardware, not the whole day. We quote the full job before we touch a bolt. Call (817) 241-4067 for a free estimate.
Usually not. The galvanized pipe frame on those 1950s and 1960s ranch gates is often still solid. What’s failed is the hardware: hinge bolts, hinge brackets, and a latch post that either bent or heaved out of plumb. We weld on site in your driveway, cut out the old hinges, true the post, and re-hang the gate so it closes square. That’s cheaper than a replacement and the repair lasts. Call (817) 241-4067 and we’ll tell you straight if your gate is worth saving.
Yes. Solar gate openers are common on Haltom City’s older ranch lots where running conduit to the gate post isn’t practical. Ghost Controls and Mighty Mule both make solar systems we install and service, and we match the panel and battery to the gate’s weight and daily cycle count. The weak point is the battery, not the panel, and we check both when we service the opener. Call (817) 241-4067 for a free estimate on a solar opener for your swing gate.
Yes, it’s a serious problem. A slide gate without a monitored safety device will not stop for a person or a car in its path. Since 2016, UL 325 standards require entrapment protection on these gates, and a 1990s operator without photocells or a safety edge is out of compliance and dangerous. We retrofit photocells and safety edges onto existing operators where possible, or replace the operator with a modern one that includes them. Call (817) 241-4067 for a free assessment of your Carson Street gate.
What Makes Haltom City Gate Access Control Different
Haltom City’s quasi-industrial zoning puts auto salvage yards, paint shops, and light-industrial tenants on the same blocks as 1950s to 1970s ranch homes. That means our access control work here looks like this: we upgrade chain-drive slide gate operators from the 1980s on Denton Highway (TX-26) and retrofit keypad entry on corroded residential chain-link swing gates within the same week. The dual-market mix doesn’t exist in strictly residential Hurst or North Richland Hills. It’s a Haltom City thing, and generic gate repair pages don’t account for it.
We replaced a failing FAAC slide gate operator on a commercial driveway off Denton Highway where the 1990s chain-drive had never been professionally serviced. The post footing had heaved in Tarrant County’s expansive clay, so our crew re-plumbed the hinge post and adjusted the rack and pinion before mounting the new operator. We added a Linear keypad entry and a safety photocell to keep the salvage yard’s vehicle access working during loading hours. The next morning, we serviced a residential swing gate two blocks away with a sagging hinge post and a Ghost Controls solar gate opener that had lost sync in the August drought. Same crew, same truck, same week. That’s what serving Haltom City actually looks like.
If you own a gate in Haltom City, you need someone who understands shared driveways, restricted rights of way, and gates that have to keep working while the work is being done. That’s us. Call (817) 241-4067 for a free estimate. Hal Gatewood’s name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City with gate access control repair and installation since 2001.