Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
We provide Fort Worth Gate Repair for DoorKing operators as an independent shop, not a factory warranty center. The single biggest difference here is the ground your gate sits on. Tarrant County’s Blackland Prairie clay moves, and when it does, your DoorKing’s gears, limit sensors, and arm housings take the hit. If your gate is grinding, jumping track, or refusing to close, call (817) 241-4067 and Hal will answer.
Why Fort Worth Residents Choose Us for DoorKing Service
Hal Gatewood has been fixing gates in Fort Worth since 2001, long enough to know which DoorKing failures are mechanical and which ones start in the dirt below the post. He grew up on the south side, not far from Hulen Mall, and learned welding at Tarrant County College before a busted driveway gate in Wedgwood showed him how few people actually understood these systems. We stock genuine DoorKing boards, gears, and sensors for the safety and logic side of the operator. For hinges, rollers, and weather seals, we use aftermarket parts that match or beat OEM specs. And every job gets our 90-Day Done Right Promise in writing. One call brings us back, no runaround.
We’re the local crew that repairs what other companies want to replace. If your DoorKing’s chassis is sound and the motor windings test fine, we’ll tell you that. We weld on site, in your driveway, so the gate never leaves your property. For more on how we approach the brand across the region, see DoorKing sales & service.
Common DoorKing Gate Repair Problems We Solve in Fort Worth
- Stripped or collapsed drive gears on DoorKing 9150 slide operators. Fort Worth’s clay heaves with every wet/dry cycle, and a post that’s shifted an inch throws constant side load onto the gear. In Wedgwood especially, posts set in the 1970s are now moving enough to eat a gear within one season if the post isn’t reset first.
- Burnt-out control board relays on DoorKing 6500 swing arms. Freezing rain seeps into the arm housing during North Texas sleet events, then re-freezes and shorts the relay. February 2021 wasn’t a fluke here. Fort Worth sits in a severe ice-storm corridor, and we see the aftermath every winter.
- Misaligned magnetic limit sensors on DoorKing 9050 slide gates. Springtime soil expansion shifts the track by fractions of an inch, which is all it takes. The gate overshoots, reverses, or stops dead because the sensor thinks it’s already home.
- Worn gearbox oil seals on DoorKing 1601 barrier arms. Fort Worth summers push past 100°F for weeks. The seals bake, crack, and let oil out. Then the internals score themselves and the arm gets jerky or stalls mid-cycle.
- Sagging gates misdiagnosed as opener failures. A gate sags in the hinge post, not in the middle. We fix the post, realign the panel, and often the DoorKing opener works fine afterward. Fix the panel without the post and you’ll fix it twice.
DoorKing Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s the thing no generic operator manual will tell you. Fort Worth sits on expansive Blackland Prairie clay, and that clay moves like a living thing. It swells after heavy rain, contracts during drought, and over decades it can push a gate post far enough out of plumb that your DoorKing slide motor’s drive gear strips itself clean. In the Wedgwood neighborhood, posts set in the 1970s and ’80s are now visibly heaving. A technician who swaps in a new opener without first diagnosing and resetting the post in a deeper concrete footer will be back for a callback within one rainy season. We start with the post, the footer, and the alignment. Then we touch the operator. That’s the order that keeps a DoorKing 9150 running for years instead of months in Fort Worth.
At a home off McCart Avenue in Wedgwood, our tech found a DoorKing 9150 slide operator grinding loudly and failing to close. The original gate post had tilted inward nearly four inches from decades of clay heave, placing constant side load on the drive gear. We pulled the gate, removed the old post, set a new six-foot-deep footer with rebar, reinstalled the operator, and replaced the stripped gear and two limit switches. The gate has cycled smoothly through two wet seasons since.
DoorKing Models & Products We Service in Fort Worth
For Gate Installation in Fort Worth and repair, we work on the DoorKing 9150 slide operator, the 6500 swing arm, the 9050 slide, and the 1601 barrier gate. That covers most residential driveway gates in Fort Worth, plus a good number of commercial barrier arms. For circuit boards, gears, and sensors, we use genuine DoorKing parts. These control safety and logic, and off-brand boards on a DoorKing are where callbacks come from. For hinges, rollers, seals, and other non-critical hardware, we’ll recommend aftermarket parts that meet or beat OEM spec and often arrive faster. Stocking parts locally means we’re not waiting on a warehouse in California while your gate sits open. A live person answers our phone 24 hours a day, and we’ll give you an honest read on whether your operator is worth repairing.
DoorKing Service Pricing in Fort Worth
| Service | Typical Range in Fort Worth |
|---|---|
| DoorKing diagnostic service call (no trip charge inside the county) | $59-$95 |
| DoorKing control board replacement (genuine DoorKing board, installed) | $350-$650 |
| DoorKing drive gear replacement (9150/9050, including labor) | $275-$495 |
| DoorKing limit sensor realignment or replacement | $120-$275 |
| DoorKing 6500 swing arm hinge repair with welding | $225-$425 |
| Full-operating DoorKing swing or slide installation | $3,000-$7,500 |
The final number depends on post condition, concrete work, and whether the chassis is sound enough to justify the repair. We quote the price before any work starts, in writing, and that’s the price you pay. We also knock $40 off any repair over $200, offer a free second opinion on any written estimate, and extend a permanent 10% discount to seniors and veterans. Call (817) 241-4067 for a free estimate on DoorKing service in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - DoorKing Gate Repair in Fort Worth
Because the Blackland Prairie clay under the track swells with spring rainfall and shifts the rail. The limit sensors then read the gate as out of position, causing it to reverse or jump. We fix this by re-anchoring the track and post, then re-syncing the sensors. Call (817) 241-4067 and we’ll take a look.
Yes, and we see it every bad winter. Freezing rain gets into the 6500 arm housing, re-freezes, and the motor stalls against the ice-locked hardware, which is how relays burn out. If your gate won’t budge after a sleet event, don’t force it. Call us at (817) 241-4067 and we’ll thaw it properly and check the board.
If the gear is stripped, the motor runs and the chain or belt moves but the gate doesn’t, or you hear a grinding, ratcheting sound. A bad limit switch will stop the gate at the wrong spot or reverse it entirely. We diagnose both on site. Estimates are free.
Usually not. Sag almost always starts in the hinge post, which in Ridglea and other older west-side neighborhoods has been sitting in expansive clay for 40 or 50 years. We reset the post, realign the gate, and the opener often needs nothing. Call (817) 241-4067 and save yourself a board replacement you likely don’t need.
Not necessarily. Range drops near Benbrook are often antenna corrosion from humidity or interference from nearby acreage and equestrian property wiring. Sometimes it’s a failing receiver board, sometimes it’s a $10 antenna. We’ll test it before we sell you anything. Call (817) 241-4067.
Service Areas Near Fort Worth
We run DoorKing service across Fort Worth and the surrounding communities. That includes Fort Worth service area coverage from Wedgwood to the Alliance corridor, plus DoorKing service in Colleyville and DoorKing service in North Richland Hills. Hurst, Kennedale, and Keller are all within our regular rotation. No trip charge inside the county.
Book Your DoorKing Service in Fort Worth Today
If your DoorKing is acting up, call us. Same-day service is available for most repair jobs in Fort Worth, and the person who answers is the person who will show up. Give me a call - that’s my real number, and I’ll pick up. (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.