Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Lakeside
When a gate motor in Lakeside quits, most homeowners call the first number they find. Then they wait. Then they wait some more. We answer the phone at (817) 241-4067 with a live person, every hour of every day, because Hal Gatewood’s name is on the shop and he means it. Our Gate Motor & Opener work in Lakeside starts with an honest look at what failed, not a pitch to sell you a whole new system. In a lakefront community where moisture kills electronics faster than inland, that diagnosis matters more than anywhere else in Tarrant County.
We’ve repaired operators on Lakeside Drive, along Shoreline Drive, and down quiet cul-de-sacs near Lakeview Elementary. The pattern is consistent: wind-driven moisture off Eagle Mountain Lake corrodes control boards and limit switches years before their rated lifespan. Knowing that going in changes what we check first, what parts we carry on the truck, and how long the repair actually lasts.
Why Gatewood Fence & Gate Is Lakeside’s Preferred Gate Motor & Opener Company
Hal Gatewood started this company in 2001 and has been showing up on time ever since. That’s not a slogan. It’s the reason people in Lakeside call us when a swing gate stops swinging or a slide gate grinds to a halt. You’ll see the same face on the first visit, the follow-up, and the job that needs rechecking eighteen months later. The person who shows up knows gates, not a script.
We keep a service truck stocked with parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most Lakeside repairs happen same-day without waiting on a distributor. Every job carries our 90-Day Done Right Promise in writing. If it isn’t right, we make it right. One call brings Hal back. No runaround, no voicemail maze.
Lakeside homeowners tend to have long driveways and private gates, and they don’t tolerate a technician who wastes an afternoon. We schedule tight windows and we hit them. If you’re on the north side near Sansom Park or down by the water on Shoreline, you’re still inside our no-trip-charge county line.
Our Gate Motor & Opener Services in Lakeside
Motor Installation
A new operator on a Lakeside gate is a measured job, not an emergency dispatch. We come out, check the post condition, measure the gate weight, and talk through what actually fits your driveway rather than what’s sitting on a shelf. Then we give you a written price before any work starts. Installation on a standard single swing gate in Lakeside typically runs $850 to $1,400, including the operator, brackets, and wiring. Slide gate installs run higher because of the track and motor base.
For lakefront lots with prevailing southerly winds, we recommend stainless hardware as a baseline. It’s not an upsell. It’s the difference between a five-year install and a fifteen-year install when wind-driven moisture is constantly hitting the gate.
Motor Repair
Repair is where we earn our keep. Most gate motor failures in Lakeside trace back to moisture intrusion, a stripped gear, or a capacitor that gave out after a freeze. We fix that in your driveway. A typical motor repair in Lakeside runs $180 to $340, depending on whether we’re replacing a capacitor, a limit switch, or a control board. If the operator is too far gone, we’ll tell you straight and show you the burned part before recommending replacement.
We repair what other companies want to replace. On a lakefront estate off Lakeside Drive, our tech pulled a LiftMaster slide gate operator that had been installed only four years earlier, but the main control board showed green corrosion on the relay contacts and the limit switch housing was pitted from constant exposure to wind-driven lake moisture. We replaced the fried board, upgraded the swing gate’s hinge post hardware to stainless, and rewired the battery backup with dielectric grease on every connection, then set the owner on a quarterly corrosion-inspection schedule.
Linear Motor Service
Linear motor operators run hot when they’re fighting a misaligned gate, and Lakeside’s black gumbo soil shifts posts enough to throw alignment off within a year or two. We check the gap first. Then the chain or belt. Then the motor itself. Linear motor repair in Lakeside typically runs $190 to $380, and if we catch the alignment issue early, we save you the cost of a full motor replacement.
If your linear motor is part of a slide gate, we’ll also inspect the track for corrosion and debris. Lakeside’s lake humidity accelerates rust on anything unpainted or under-coated.
Slide Motor Service
Slide gates dominate lakeside estates because they save driveway space and hold up to high wind better than a big swinging panel. But the motor and gearbox sit low, and Lakeside lots slope toward the water. Drainage matters. We install slide gate motors with sealed gearboxes and raised platforms where water pools after heavy rain. Slide motor installation in Lakeside generally runs $1,100 to $1,900, depending on gate length and whether new track is required.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeside
We service what’s already on your gate. Ghost Controls, DoorKing, Elite, and Mighty Mule are common on Lakeside properties, and we keep the replacement boards, remotes, and limit switches for those brands on the truck. If you’ve got a LiftMaster or FAAC, same story. Our mechanics aren’t brand-exclusive, which means we fix what you own instead of pushing a conversion. When a part has to be ordered, we tell you the real lead time and call you when it lands. No mystery windows.
Common Gate Motor & Opener Problems We See in Lakeside Homes
- Capacitor failure after ice storms: When a North Texas ice storm freezes an operator housing, the seal cracks. Condensation reaches the windings, and the capacitor goes first. We see this every winter in Lakeside, and it’s a quick fix when caught early, around $95 to $150 for the part and labor.
- Hinge post heaving from black gumbo soil: Lakeside’s expansive clay shrinks during drought and swells after rain, pushing gate posts out of plumb. The operator then has to work harder, strips its gear, and overheats. Fix the post alignment first and the motor usually settles down.
- Corroded loop detector splices: Underground wire splices under Lakeside driveways wick moisture from lake-saturated soil, causing loop detectors to false-trigger. The gate stops and reverses unpredictably. We dig up the splice, re-seal it properly, and the ghost operation stops.
- Wind-latched drift on lake-facing gates: Gates facing Eagle Mountain Lake’s prevailing winds take constant lateral pressure, which drifts the latch plate out of alignment. The operator then strains against the misaligned latch and burns out. Heavy-duty wind-rated hinges correct this permanently on lakeside-facing properties.
Pricing for Gate Motor & Opener in Lakeside, TX
Here’s what we charge in Lakeside, in plain numbers. Motor repair runs $180 to $340. Linear motor service is $190 to $380. Full motor installation on a swing gate is $850 to $1,400. Slide gate installation runs $1,100 to $1,900. Capacitor replacement alone is $95 to $150. You’ll get a written quote before we start, and that quote doesn’t change at the door.
Standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for an exact quote. Estimates are free.
We Also Serve Cities Near Lakeside
Gatewood Fence & Gate serves the whole western Tarrant County area, including Fort Worth, Colleyville, North Richland Hills, and Hurst. If you’re just outside the Lakeside city limit, we still cover you with the same response time and the same written promise. Scheduling runs from our Dallas-Fort Worth metro office, but the truck you see in your driveway is local and the person on it knows this lake community’s gate problems by heart.
Serving Lakeside, TX - Our Local Coverage Area
We’re based in the Lakeside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Lakeside
Because prevailing southerly winds carry moisture-laden air directly onto your operator housing, control board, and limit switches, accelerating corrosion that inland Tarrant County gates simply don’t experience at the same rate. We seal housings, use dielectric grease on connections, and specify stainless hardware for lakeside-facing gates as standard practice. Call (817) 241-4067 for a corrosion inspection and a written repair quote.
Yes. Eagle Mountain Lake shorelines see more frequent utility interruptions than inland neighborhoods, and a gate without battery backup strands you in or out until power returns. We install sealed backup systems sized to your operator, typically $350 to $650, and we test them quarterly as part of a corrosion-inspection schedule. Call (817) 241-4067 to have one quoted the same week.
It’s almost always the soil. Lakeside sits on Tarrant County’s expansive black gumbo clay, which swells when wet and shrinks in drought, heaving posts out of plumb. Wind pressure over years compounds it. We reset the post, add a proper concrete footing below the frost line, and re-true the gate before adjusting the operator. Call (817) 241-4067 for a post-and-operator assessment.
If your gate reverses immediately after closing, or refuses to close at all, the photo eye lenses or relay contacts are likely corroded from lake-driven moisture. We test the beam alignment, check voltage at the eye, and replace corroded units in one visit, typically $120 to $220 per eye. Call (817) 241-4067 and we’ll diagnose it on site.
Yes, but the motor has to sit high. On low-lying Lakeside driveways that pond after storms, we mount the operator on a raised, sealed platform and run conduit above the flood line. That adds $200 to $400 to the install, and it’s the only way to keep the gearbox out of standing water. Call (817) 241-4067 for a free on-site measure and a written price.
Contact Gatewood Fence & Gate for Gate Motor & Opener in Lakeside
You’ll get Hal or one of his crew on the phone when you call (817) 241-4067. No voicemail, no call center. Tell us what your gate is doing or not doing, and we’ll schedule a time that actually works. We show up in the window we promise, give you a written price before any work starts, and leave the gate operating like it should. If it isn’t right within 90 days, one call brings us back. That’s the promise, and it’s been that way since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeside and western Tarrant County since 2016.