Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Lakeside, TX
Gate repair in Lakeside is different than it is ten miles inland. The moisture off Eagle Mountain Lake gets into hinges, operators, and post footings in a way that dry suburban air never does. If your gate is sagging, grinding, or refusing to close, call (817) 241-4067 and Hal Gatewood will walk you through what he thinks is wrong before he ever sets foot in the truck. We answer live, around the clock, and we know Lakeside well enough to tell you what to check over the phone before we schedule the visit.
Most gates in Lakeside don’t need replacing. They need the right repair, done where the gate stands, by someone who has been fixing them since 2001.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Lakeside Homeowners Choose Gatewood Fence & Gate
Hal Gatewood puts his name on the shop and on every invoice. There is no dispatch queue and no call center three states away. When you call, you get a person who can talk through the problem. When the truck shows up, the person driving it has done this for over two decades and carries the Gatewood name behind the work.
We repair what other companies want to replace. A gate that sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you will fix it twice. Hal has welded gates back together on site in driveways all over Lakeside, including work around the lakefront properties off Ten Mile Bridge Road and through the ranch-style neighborhoods along Peden Road. If the frame is sound, we repair the frame. If the operator is tired, we service or replace the operator. The difference matters when you are looking at a quote.
Our repair work is backed by the 90-Day Done Right Promise in writing, on every job. One call brings Hal back, no runaround. That is not a warranty buried in fine print. It is a promise you can hold in your hand.
Lakeside homeowners also get our standing offers: $40 off any repair over $200, no trip charge inside Tarrant County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Background-checked, uniformed technicians do the work. Hal is certified to service nine major gate brands including Linear, Viking, and Ghost Controls.
Gate Repair Services We Offer in Lakeside
Every Lakeside gate job starts with an honest look at what the gate actually needs. Here is what we do, and how each service fits the gates we see around Eagle Mountain Lake.
Gate Repair
Sagging or leaning gates almost always trace back to the hinge post or the hinges themselves, not the panel. We repair on site, including welding, so your gate never leaves your property. Learn more about our Gate Repair in Lakeside.
Gate Installation
When a gate is beyond repair, or when a new lot needs a gate from scratch, we measure, build, and install swing and slide gates sized for Lakeside’s long driveways and irregular lakefront lots. Learn more about our Gate Installation in Lakeside.
Gate Motor & Opener
Operator failure after a North Texas ice storm is one of the most common calls we get in Lakeside. Frozen seals, stripped gears, and burned boards are all repairable before you spend on a full replacement. Learn more about our Gate Motor & Opener in Lakeside.
Gate Access Control
For waterfront properties where privacy matters, we install and service Gate Access Control - Lakeside systems including keypads, intercoms, and remotes that work with your existing gate, not against it. Hal will show you how to use it before he leaves.
Gate Parts & Welding
We keep common replacement parts on the truck for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a hinge, latch, or section of ornamental iron needs welding, Hal does our Gate Parts & Welding in Lakeside right in your driveway, not in some shop across the county.
Neighborhoods We Serve in Lakeside
We work all over Lakeside, but most of our calls come from the lake-adjacent neighborhoods where gates are common and moisture is constant. You will see our trucks around these areas regularly:
- Lakefront estates along Ten Mile Bridge Road
- Waterfront Drive and the Eagle Mountain Lake shoreline
- Ranch-style homes along Peden Road
- Properties off Morris Dido Newark Road
- Neighborhoods near the Lakeside city limits
Typical response time across Lakeside is same-day for repair calls and next-morning for most others. When your gate won’t close and your driveway is open to the road, we treat that like the security problem it is.
Why Lakeside’s Climate & Housing Affect Gate Repair
Lakeside sits directly on the Eagle Mountain Lake shoreline in western Tarrant County. That shoreline location is the single biggest factor in how gates age here. Persistent lake-driven humidity and wind-blown moisture off the water accelerate oxidation of gate hardware, hinges, and operators at rates meaningfully higher than inland Fort Worth suburbs. A hinge that would last fifteen years in Colleyville might start showing rust and fatigue in Lakeside in half that time. Gates on lots facing the prevailing southerly winds get it worst. Hinge fatigue and latch drift show up far faster than comparable inland installs because the wind works the gate panel constantly, even when no one is using it.
That is why Hal defaults to heavy-duty, wind-rated hinges and stainless hardware as a baseline for any lakeside-facing property. It is not an upsell. It is the only way to keep a gate square and latched when the wind off the lake pushes on it day after day. The same is true for operators: sealed, weather-rated units hold up better here than the cheaper open-frame models.
The soil does its own damage. Tarrant County’s expansive black clay, the gumbo everyone in the county knows, shifts dramatically with seasonal wet-dry cycles. Gate posts heave, lean, and throw automated gates out of alignment. It is a recurring repair driver all over the area, but on Lakeside’s irregular lakefront lots, where the ground holds moisture differently near the water line, the movement can be even more pronounced. We check post footings on every repair call, because a gate that is out of alignment is often standing on a post that moved.
And then there is the ice. North Texas ice storms can freeze hydraulic and electromechanical gate operators solid, cracking seals and stripping gears in a single overnight event. We see those calls every winter in Lakeside, usually the morning after a front pushes through and the temperature drops hard.
All of this means one thing for Lakeside homeowners: your gate is not a set-it-and-forget-it fixture. It needs a repair partner who knows the lake, the wind, the soil, and the ice. That is us.
Pricing for Gate Repair in Lakeside
What does gate repair cost in Lakeside? Here are the ranges we quote most often:
- Service call & diagnosis: No trip charge inside Tarrant County
- Hinge replacement (standard residential): $85-$210
- Gate post straightening or replacement: $300-$850 depending on post size and soil conditions
- Operator repair (board, gear, or seal work): $190-$525
- Full operator replacement: $750-$1,800 installed, depending on brand and gate weight
- On-site welding (per point): $65-$140
Every price is quoted and agreed before any work starts. The number Hal gives you is the number on the invoice. No surprises, no haggling, and the $40-off-any-repair-over-$200 offer applies automatically when the math works. Call (817) 241-4067 for an exact quote, estimates are free.
Service Area - Cities Near Lakeside
Gatewood Fence & Gate works throughout western Tarrant County. We regularly serve homeowners in Fort Worth, Colleyville, North Richland Hills, and Hurst. If you are outside Lakeside but still in the area, give us a call and we will tell you straight whether we can get to you this week.
Serving Lakeside, TX - Our Local Coverage Area
We’re based in the Lakeside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakeside
Most Lakeside gate repairs run between $85 and $850, depending on the part and the labor involved. Hinge work is typically under $210. Operator repairs land between $190 and $525. Full operator replacements run higher, from $750 to $1,800 installed. Every quote is fixed before work starts, so there is no surprise on the invoice. Call (817) 241-4067 for a free estimate.
For repair calls, yes. Same-day response is typical for Lakeside, especially when a gate is stuck open or won’t close. A live person answers the phone 24 hours a day, so call (817) 241-4067 and Hal will tell you over the phone whether the job needs immediate attention or can wait.
The lake. Moisture and wind off Eagle Mountain Lake keep hinges, latches, and operator housings damp far more often than inland neighborhoods, and that constant exposure accelerates oxidation. Gates on lots facing the open water get the worst of it. Upgrading to stainless hardware and wind-rated hinges is the standard fix we recommend here, and it usually ends the cycle.
We weld on site. Hal carries the welding rig to your driveway, and the gate stays on your property. For lakeside estate gates, dragging them off to a shop is more work, more damage risk, and more money. There is no reason for it when the person standing in your driveway can do the job right where it sits.
Yes. On any automated gate repair or installation in Lakeside, we handle the low-voltage power run, the safety edges, and the photo eyes. Texas requires safety edges or photo eyes on every automated gate, and Hal will not leave a gate running without them. Call (817) 241-4067 and we will walk the job with you over the phone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeside and western Tarrant County since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakeside Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond