Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
Gate installation in Fort Worth is different from gate work in Dallas, Austin, or anywhere else in Texas, and the reason is right under your feet. Tarrant County sits on Blackland Prairie clay that swells when it rains and shrinks when it doesn’t, and that movement is exactly why so many Fort Worth gates stop latching by late summer. Gatewood Fence & Gate has been doing Gate Installation and repair in this soil since 2001, which means we know the post depth, the hardware sizing, and the operator specs that actually hold up here. If you need a new driveway gate, a ranch entrance, or a replacement for a gate that’s been fighting the clay for twenty years, call us at (817) 241-4067 and Hal himself will give you a straight answer and a free estimate.
Key Takeaways:
- Fort Worth’s Blackland Prairie clay shifts seasonally, so post depth and footing design matter more here than in most of Texas.
- We install swing gates, slide gates, driveway gates, and solar-powered ranch gates, and we weld on site, in your driveway.
- Every job comes with our 90-Day Done Right Promise in writing. If it’s not done right, we make it right.
- You’ll speak to a live person, 24/7, not a voicemail. The shop is local and Hal’s name is on every invoice.
- Call (817) 241-4067 for a free estimate. The price is agreed before any work starts, in writing.
Why Gatewood Fence & Gate Is Fort Worth’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 because he kept finding gates around Fort Worth that had been installed wrong the first time. Shallow post footings on clay. Undersized hinges on heavy ranch gates. Openers bolted to a post that was already leaning. The fix is rarely a new gate. It’s a gate that’s set deep enough, hung true, and paired with an operator that’s actually rated for the weight and the weather. That is the work we do.
When you call about Fort Worth gate installation, you’ll get a live person on the line, day or night. Not a phone tree. Not a call center three states away. Hal answers his own phone, and if he’s under a gate at the time, his crew grabs it and gets him the message. The shop’s address is published, the license number is there for anyone to look up, and the person who shows up at your property is background-checked and in uniform. That matters to the folks we serve from Wedgwood to Benbrook to the Alliance corridor, because a lot of them have already been burned by an outfit that quoted one price on the phone and charged another at the door. We quote it, we write it down, and we honor it.
We’ve built our reputation in Fort Worth one Gate Repair - Fort Worth job at a time. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate you’ve gotten from someone else. And a permanent 10% discount for seniors and veterans. Those aren’t gimmicks. They’re just how Hal runs the shop.
Our Gate Installation Services in Fort Worth
Swing Gate Installation in Fort Worth
Swing gates are everywhere in Fort Worth, from the early-1900s Craftsman homes in Fairmount to the multi-acre horse properties west of Loop 820. The mistake we see most often is a beautiful gate hung on a post that was set before anyone accounted for clay heave. We core footings down to stable soil, pour to the depth the clay actually demands, and set the post plumb before the gate ever goes on. When we’re done, you get a gate that opens and closes by hand for years before any opener even gets bolted on.
Sliding Gate Installation in Fort Worth
A slide gate is the right call for a lot of Fort Worth driveways, especially where a driveway slopes or where a swing gate would eat too much room at the street. But a slide gate is only as good as the track and the rack, and if the post footing shifts on clay, the gate jumps the rack and grinds to a stop. We set slide gate footings deeper than the local minimums because Blackland Prairie demands it. The extra concrete and the extra day are cheaper than a callback after the first wet season.
Driveway Gate Installation in Fort Worth
Most driveway gates in Fort Worth pick up a motor eventually, even if the gate starts as manual. We install the gate, the hardware, and the operator as one system, sized together. On a Wedgwood ranch home from the 1970s, that might mean a standard tube steel gate with a Mighty Mule in Fort Worth opener. On a newer place along the Alliance corridor, it might mean an ornamental iron double gate with a DoorKing operator and a keypad. You don’t need to know which one fits before we arrive. That’s our job.
Pedestrian Gate Installation in Fort Worth
Pedestrian gates get ignored until the latch sticks and someone gets locked in the yard. We install freestanding pedestrian gates with proper post depth and self-closing hinges where the city or an HOA requires them, and we match the existing fence line so the gate doesn’t look bolted on as an afterthought. In older neighborhoods like Ryan Place, where wrought-iron gates have been hanging since the 80s, we can often rebuild the gate and reuse the iron rather than ripping it out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We’re certified to service nine major gate brands, and we install and maintain all of them across Fort Worth: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For rural Fort Worth properties, Ghost Controls and Mighty Mule operators come up constantly because they pair well with solar power, and we keep those Gate Parts & Welding - Fort Worth supplies in the truck. DoorKing is the workhorse on the commercial side and on larger ranch entrances. The brand matters less than the sizing, but knowing each one inside and out means we can tell you honestly whether a repair or a replacement is the smarter move.
Common Gate Installation Problems We See in Fort Worth Homes
- Hinge posts tilting out of plumb on Blackland Prairie clay. In west-side neighborhoods like Wedgwood, posts set in the 70s and 80s are now visibly leaning. You can’t fix the gate until you fix the post, and the repair that lasts requires a deeper concrete reset.
- Openers burned out after a Fort Worth ice event. February 2021 wasn’t a one-off. Sleet freezes hinge posts solid, the opener stalls against the resistance, and the motor burns itself out. We see it after every bad winter storm in this city.
- Swing gates binding at the latch in July. Fort Worth summers push above 100°F for weeks, and metal frames expand enough to trip the operator’s force limit. The gate stops closing and the opener looks broken. Usually it’s an alignment fix, not a new motor.
- Slide gates jumping the rack after a wet season. When clay swells, footings shift. When footing shifts, the rack and pinion fall out of alignment. We level the track, reset the rack, and realign the catch so the gate tracks true again.
Pricing for Gate Installation in Fort Worth, TX
A single driveway swing gate in Fort Worth typically runs $1,800-$3,500 installed, depending on width, material, and whether it’s manual or automated. A pedestrian gate runs $600-$1,400. A sliding gate runs $2,500-$5,500, with the track and footing work accounting for a big share of that. A heavy pipe-frame ranch gate for a rural entrance can run $3,000-$8,000 once you factor the wider span, heavier hardware, and an operator rated for the load.
What moves the number the most in Fort Worth is the post work. If the existing footings are shallow or the clay has already shifted them, we factor that in up front and tell you exactly what it adds. You get a written quote before any work starts, agreed to in advance, and that price doesn’t change at the door. Call (817) 241-4067 and we’ll come out, look at the site, and put the number in writing.
We Also Serve Cities Near Fort Worth
Our service area covers Gate Installation in Fort Worth and the surrounding communities, including Haltom City, North Richland Hills, Hurst, and Kennedale. If you’re on the edge of Tarrant County or just outside the loop, call us anyway. No trip charge inside the county, and we’ll tell you straight if we can get to you this week or next.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Worth
For a standard driveway gate post in Fort Worth, we set footings at least 36 to 42 inches deep, and deeper for wide or heavy gates. Blackland Prairie clay expands and contracts enough to shift a shallow post within a season or two, so we core down to stable soil and pour wider than the post diameter to resist lateral movement. If you’re near a creek or on a slope, we may go deeper. Call (817) 241-4067 and we’ll tell you what your specific site needs before we bid the job.
Yes, and for rural Fort Worth properties where running mains power means trenching hundreds of feet down a driveway, solar is often the smarter and cheaper option. We pair Ghost Controls or Mighty Mule operators with a properly sized solar panel array and battery bank, and we size the system for the gate’s weight and how many cycles a day it sees. On overcast stretches or after an ice event, the battery bank carries the load. If your gate is in the shade from a canopy of pecans or oaks, we’ll discuss panel placement before we install anything. Call (817) 241-4067 for an exact quote on a solar setup for your property.
For a wide farm entrance, we generally recommend a heavy pipe-frame swing gate or a properly tracked slide gate, sized for the span and built to handle the weight. Out near Benbrook and the Parker County line, we’ve installed 20-foot and 24-foot ranch gates where the old hinge post had to be cored out and reset before the new gate could track true. For livestock, we also recommend safety photocells at the latch line so the gate reverses if an animal or rider crosses while it’s closing. We’ll walk your entrance with you and tell you which option fits. Call (817) 241-4067 for a free on-site look.
In Fort Worth, a gate that stops closing after a stretch of 100°F days is usually binding at the latch because the metal frame expanded in the heat. The gate presses against the latch, the operator hits its force limit, and it reverses or gives up. The fix is often a simple realignment of the hinges and the latch, not a new motor. We see this constantly in July and August, particularly on black iron and welded steel gates that face full sun all afternoon. Call (817) 241-4067 and we’ll diagnose it on site.
Yes. Gate operators in Fort Worth must comply with current UL 325 safety standards, which require secondary entrapment protection devices like safety photocells, edge sensors, or both, depending on the installation. We install monitered photocells and safety edges on every automated gate we put in, and we test the reversal function before we leave. A gate that can’t reverse when a kid or a dog crosses the threshold is a liability, not a convenience. Call (817) 241-4067 if you want your existing gate checked against current requirements.
If you’ve got a gate that’s leaning, an opener that quit, or a driveway that’s been open to the road for too long, call Hal for Fort Worth Gate Access Control at (817) 241-4067. You’ll get a straight answer, a free estimate, and a written price before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.