Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keller
Keller’s gate access systems are reaching an age where failures cluster. The large-lot homes built from the 1990s through the late 2000s came standard with ornamental iron driveway gates, and 15 to 25 years later, those keypads, intercoms, and operator control boards are wearing out together. We fix them in your driveway, not in some shop across town. Call Hal at (817) 241-4067 and a live person answers, day or night.
We’re not a franchise rolling trucks from three counties away. Gatewood Fence & Gate has been owner-operated since 2001, and every job carries our 90-Day Done Right Promise in writing. You’ll get an upfront price before any work starts, and nobody changes it at the door.
Why Gatewood Fence & Gate Is Keller’s Preferred Gate Access Control Company
Keller homeowners call us because we understand the specific failure pattern on this side of the metroplex. North Texas Blackland Prairie clay expands and contracts with every rain and drought cycle, and it moves brick gate columns out of plumb in ways a technician from Fort Worth’s sandier soil rarely sees. We quote gate access control work in Keller with that soil in mind, because we’ve been pulling leaning posts back true for years.
Our Gate Access Control work in Keller draws on more than two decades of repair-first experience. Hal has been welding and servicing gate operators since 2001, and his name goes on every invoice. We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’ve got an older BFT underground operator or a Viking control board, we stock common parts and can usually have Keller jobs diagnosed same-day.
We answer the phone around the clock with a real person. Not a callback queue. When a Hidden Lakes keypad dies at 10 p.m., you talk to someone who can actually help. And because we’re locally owned with a published address, you can show up and look us in the eye if you ever need to.
Our Gate Access Control Services in Keller
We handle everything between the wall and the gate leaf, with the heavier focus on what Keller’s custom and large-lot properties actually run. Here’s what that looks like in practice.
Keypad Entry
Keller keypads sit in direct afternoon sun for half the year, and the plastic housings on older models get brittle enough to crack in February freezes. We replace failed keypads, rewire corroded connections, and program multi-code setups so family, landscapers, and delivery drivers each have their own entry code. If your keypad is mounted on a brick column that’s drifted, we address the alignment before installing anything new.
Video Intercom
The Hidden Lakes and Cobblestone Park estates in Keller frequently run gate intercoms tied to indoor monitors or phone apps. When the camera feed drops or the audio crackles, it’s usually a failing power supply, corroded wire splice at the column, or a control board that’s been cooked by attic-like heat inside the pedestal. We service DoorKing and Viking intercom systems regularly in Keller and can add video entry to an existing system without tearing out the whole gate.
Smart Access
We integrate gate control with the phone systems Keller homeowners already use, including MyQ-compatible LiftMaster operators, Ghost Controls phone modules, and app-based entry for family and guests. The goal is straightforward: open the gate from your phone, see who’s at the driveway, and set temporary access for a contractor without handing out a code that never expires. Smart access on Keller’s large lots also means connecting the gate to the same Wi-Fi mesh that already covers the house, which we test before we leave.
Card Reader and Phone Entry Systems
Gated estates and a handful of Keller’s private lanes use card readers or telephone-entry panels at the curb. We repair and replace reader modules, keypad-and-card combos, and the buried wiring that feeds them. On a Hidden Lakes property with a 2003 entry column, we traced a dead reader to a corroded splice box sitting in a clay-filled trench; the fix lasted because we sealed it against the same soil that killed the first one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
Keller’s gate stock skews toward what builders specified in the 1990s and 2000s, which means we open plenty of LiftMaster, FAAC, and Viking units alongside newer Ghost Controls and DoorKing installs. We keep common control boards, keypad modules, safety photocells, and intercom parts on hand so Keller jobs don’t wait on a parts truck from Dallas. If you’re deciding between repairing or replacing an older access panel, ask us for a straight answer: we repair what still has life in it, and we’ll tell you when it’s not worth another board.
Common Gate Access Control Problems We See in Keller Homes
- Clay-shifted posts throw the gate out of alignment. Keller’s Blackland Prairie soil moves more than most techs expect. When the brick column leans even a degree or two, the gate leaf binds on the operator rack and the motor works itself to death. We re-plumb and re-bore before mounting new access hardware, not after it fails again.
- Summer heat cooks access control boards. A metal or dark-colored pedestal on a Keller driveway can hit 130°F inside on a July afternoon. Older FAAC and Linear control boards develop intermittent no-open/no-close faults when the traces expand and crack. We wire in ventilation where the cabinet allows it and swap boards with units rated for the heat load.
- Freeze-thaw cycles split keypad housings and seals. Keller’s version of winter, the sudden hard freeze after a wet fall, is rough on exposed plastic. Keypad faces crack, hydraulic seals in underground operators split, and condensate finds its way into control boards. We see a spike in access failures every January and February, and we service them with parts built for that cycle.
- Wire corrosion at the column base. The same clay that moves posts also holds moisture against buried low-voltage wire splices. Keller gates installed 15-plus years ago often have splice boxes packed in damp soil at the base of a brick column. Intermittent keypad and intercom failures are frequently just a corroded splice, which we strip, solder or re-terminate, and seal.
At a Hidden Lakes estate last spring, our crew found a dead keypad and an operator pulling the gate nearly two inches off its hinge post. The post had shifted in the clay over twenty wet-dry cycles. We drove helical piers into the soil to lock the post true, re-bored the hinges so the leaf hung square, then installed a LiftMaster operator with new safety photocells and a DoorKing video intercom. The gate runs silent now, through dry summer and rainy winter alike. That’s the repair-first approach we bring to every Keller access control job.
Pricing for Gate Access Control in Keller, TX
Here’s what Keller homeowners can expect, in plain numbers. A keypad replacement on a Keller driveway typically runs $180 to $340 installed, depending on whether we’re surface-mounting a single-code pad or flush-mounting a multi-code unit in brick. Adding a phone-based smart access module to an existing operator is usually $320 to $520. A video intercom upgrade with camera, monitor or phone app, and power supply generally falls between $650 and $1,100 on Keller’s large-lot properties. A full access control retrofit that includes a new operator, keypad, photocells, and intercom typically ranges from $1,800 to $3,600, with the higher end reflecting heavier ornamental gates and re-plumbed posts. Every price is quoted and agreed in writing before we touch the gate, and any repair over $200 takes $40 off.
We also offer a free second opinion on any written estimate, and seniors and veterans receive a permanent 10% discount. No trip charge inside the county, so service to Keller costs nothing extra up front.
We Also Serve Cities Near Keller
Besides Keller, we work in Haslet, North Richland Hills, Haltom City, and Colleyville on a regular basis. If you’re in one of those towns and need Gate Access Control in Keller or the surrounding area, the same crew and the same 90-Day Done Right Promise apply. Call and we’ll be straight about when we can get there.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keller
Because the post was never fixed before the new operator went on. Keller’s Blackland Prairie clay moves brick columns over time, and any pre-2005 gate has likely drifted enough that a new operator bolted to the leaning post will bind and fail within one season. We quote post re-plumbing and hinge re-boring as standard scope on Keller access control upgrades for older gates. Call (817) 241-4067 and we’ll tell you if your post needs piers before we touch the operator.
Usually, yes. On most Hidden Lakes properties, we can add a DoorKing or Viking video intercom to the existing gate and wire it to an indoor monitor or phone app without replacing the operator. We’ll check the condition of your low-voltage wiring and column before quoting, because Keller’s soil and summer heat both take a toll on buried and enclosed wire. Estimates are free.
We service and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Keller’s older subdivisions skew toward LiftMaster, FAAC, and Viking, while newer estates often run Ghost Controls or DoorKing phone-based entry. We keep common parts for all nine brands in stock, so we’re not waiting on the mail to get your gate back online.
Yes, and it’s not subtle. The shrink-swell clay that dominates Keller heaves the ground many times a season, which can crack hydraulic lines and misalign underground operator pistons. Add a hard freeze like Winter Storm Uri and you get split seals and water intrusion. This is a Keller-specific failure pattern, and it’s why we recommend a sealed underground box and properly bedded conduit on new installs here. Call for a free assessment.
Use a keypad with a sealed, weather-rated housing and replace any unit whose plastic face is already cracked from summer sun, because freeze water gets into those cracks and shorts the board. We stock sealed keypads rated for North Texas temperature swings and install them on Keller brick columns with proper drainage at the wire entry. If yours is intermittently dead after a freeze, that’s a five-minute phone call to (817) 241-4067.
Talk to a Real Person About Your Keller Gate Access System
If your Keller gate keypad is dead, your intercom is crackling, or the gate just won’t open when you punch the code, call (817) 241-4067 right now. A live person answers. We’ll give you a straight read on what’s wrong, a written price before any work starts, and a 90-day promise that it’s done right. Hal Gatewood’s name is on the shop and on every invoice. That’s been true since 2001, and it’s not changing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving the Keller area since 2001.