Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller almost always turns into a bigger conversation than it starts as, and that’s not a bad thing. It means someone is looking at a gate that was hung in 1998 or 2003, on North Texas clay, and asking whether the new operator will actually survive - which is why Keller Gate Access Control decisions matter from day one. That’s the conversation we have most days at Gatewood Fence & Gate, and it’s one most companies skip because it’s easier to sell a box than fix a post. Hal Gatewood has been at this since 2001, and he answers his own phone. Call (817) 241-4067 and you’ll get him or a live person, not a recording.
Why Gatewood Fence & Gate Is Keller’s Preferred Gate Installation Company
We show up in Keller a lot, and we know the houses before we get to them. Someone says “Hidden Lakes” or “Eagle Ridge,” and we already know what era of gate we’re likely looking at: ornamental steel on a poured column, hung when the subdivision went in, now twenty-plus years old. That matters because the work isn’t generic. A gate off Bourland Road and a gate off Bear Creek Parkway may look the same from the street, but the tilt of the post tells us which one has been fighting the clay longer. Our reputation in Keller is built on the fact that we don’t sell what the house doesn’t need. The 90-Day Done Right Promise is in writing on every job, and if it’s not done right, one call brings us back. No runaround.
We’re locally owned and owner-operated. Hal’s name is on the shop and on every invoice. You can look up our license number, or you can drive to the shop and look him in the eye. That’s the oldest accountability there is, and for homeowners in Keller who have already been burned by a company that quoted one price on the phone and another at the door, it’s the reason we get called back.
Our Gate Installation Services in Keller
Driveway Gate Installation
Driveway gates in Keller aren’t the exception; they’re the norm. Large-lot subdivisions built between 1990 and 2008 put automated gates on the original construction list, and that means a new driveway gate usually means replacing something that’s been there for two decades. We measure the opening, check the columns, and give you a written price before any work starts. A typical driveway gate installation in Keller runs $3,200 to $7,800 depending on the opening width, the steel profile, and whether we’re reusing the existing columns or setting new ones. We do the full job: fabrication, hinging, operator, safety edges, and the power run.
Pedestrian Gate Installation
Pedestrian gates in Keller usually live alongside wider driveway gates or wrap around the side yard of a brick home off Keller Parkway. They get less attention and more weather. We build them square and set them deep, because a pedestrian gate on Blackland clay will heave just as fast as a driveway gate if the footer isn’t dug below the active soil zone. Most pedestrian gate installations in Keller run $900 to $2,400, including the post, hinges, latch, and a closer if you want one. We quote it before we dig.
Sliding Gate Installation
Sliding gates make sense on longer driveways and wider lots where a swing gate would need too much clearance. In Keller, we install slide gates on cantilever or V-track systems, and we line up the rack and pinion with the post line before the operator ever gets bolted on. That’s the step that gets skipped by people who don’t know the clay here, and it’s the step that determines whether the motor lasts a season or ten years. A typical sliding gate installation in Keller runs $4,200 to $9,500 for a single leaf, depending on track length and the operator brand. We stock DoorKing, LiftMaster, and FAAC parts locally.
Swing Gate Installation
Swing gates are the classic Keller look: ornamental iron or steel on brick columns, opening into a driveway with a quarter-acre or more behind it. The gate sags in the hinge post, not in the middle, and that is where we start. On any swing gate install in Keller, we check the column plumb before we hang steel, on any installation involving a pre-2005 gate installation. A new swing gate in Keller typically runs $3,000 to $7,200 for a single leaf, more for a double gate, and we quote it in writing. Free estimates, and the price quoted is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We’re certified to service nine major gate brands, and on most Keller installs we lean toward LiftMaster, FAAC, and DoorKing because they hold up well in North Texas heat and we stock local parts for them. We also work on Viking, Elite, and Ghost Controls for homeowners who already have an operator they care about. You’ll never hear us tell you to rip out a good operator just because it isn’t the one we sell. We’ll tell you honestly what can be retrofitted and when replacement is the cheaper answer. That’s how Hal has always worked, and that’s why Keller homeowners call us back for the next gate.
Common Gate Installation Problems We See in Keller Homes
- Pre-2005 gates on Blackland clay. The post heaves out of plumb and binds the gate leaf. You can bolt a brand-new operator to a leaning post, and that operator will burn out its own motor within a season. We read the post tilt from the curb and we’ll tell you before we touch the gate whether a re-plumb is in the picture.
- Legacy control boards from the 1990s and 2000s. A gate installed before 2005 in Keller likely operates without modern UL 325 entrapment protection. We see photo-eye and edge sensor retrofits skipped on competitive quotes all the time, and that’s a safety issue on a gate closing on a child or a dog. We include the retrofits in our quotes, not as an afterthought.
- Post movement that only shows up after a hard freeze. Winter Storm Uri did a number on hydraulic seals and keypad housings around Keller, and the following spring revealed slow leaks and sticky valve action on legacy swing and slide operators. A gate that worked fine in 2020 may be binding now, and it’s not the operator’s fault - it’s the post.
- Double gates on slopes or drainage swales. Keller’s large lots often pitch toward the street or a creek, and a double gate on even a mild grade can rack if the center stop isn’t set right. We see gates dragging at the middle seam on drives off Marshall Ridge and Shady Grove. That’s a fix, not a replacement, most of the time.
Pricing for Gate Installation in Keller, TX
Let’s talk real numbers, because you deserve better than “it depends” without a range. A pedestrian gate in Keller runs $900 to $2,400. A single swing driveway gate runs $3,000 to $7,200. A sliding gate runs $4,200 to $9,500. A double gate will be on the higher end of whichever style you choose, and the final number depends on the steel profile, the operator, whether we’re setting new columns, and whether the existing post needs re-plumbing - and on a pre-2005 installation on Keller clay, that post re-plumb is near-certain. We quote in writing, we agree on the price before any work starts, and we don’t change it at the door. If you have another written estimate, bring it and we’ll give you a free second opinion. Call (817) 241-4067 and we’ll come measure.
We Also Serve Cities Near Keller
Our Gate Installation team works across the northeast Tarrant County area, and Keller is right in the middle of the territory we know best. If you’re in Haslet, North Richland Hills, Haltom City, or Colleyville, we can run the same route and give you the same written pricing. That means no trip charge inside the county, and no surprise on the invoice. For Keller homeowners, you’re getting a crew that knows Keller neighborhoods and the specific gates that were hung there.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
On a 1998 gate on Keller’s Blackland clay, you should expect post work. The shrink-swell cycle here moves brick columns visibly out of plumb within 15 to 20 years, and an operator bolted to a leaning post will fail on warranty within a season. We can replace just the operator if the post is genuinely straight, but on a pre-2005 gate we almost always recommend Gate Repair - Keller style re-plumbing and hinge re-boring at the same time. It’s the single biggest factor in whether a new operator survives, and we’ll show you the post tilt before we quote it. Call (817) 241-4067 and we’ll come read it.
Yes, we install rack and pinion slide gates in Keller, and it matters because the rack has to align with the post line, not the ground line. On clay that’s moving, the ground line shifts seasonally; the post line is what the gate actually rides on. We took a 2003 LiftMaster slide gate operator out in Hidden Lakes last month with a burnt control board and a badly sagging rack and pinion. The hinge post had heaved a full inch out of plumb, so a new operator bolted to that post would have torn its own worm gear within a season. We re-plumbed the post, re-bored the hinges, and handled the Gate Parts & Welding in Keller to get it all square, then installed a new LiftMaster with a safety photocell and loop detector, and the gate now closes square and reverses clean on the test block. That’s the difference between fitting parts and installing a system. Give us a call and we’ll walk your gate line with you.
If a swing gate sags and drags, the problem is almost always the hinge post, not the panel. A gate sags in the hinge post, not in the middle, and that is where we start. On Keller clay, the post has likely heaved or leaned enough that the leaf is no longer hanging true. Re-hanging the same panel on a replumbed post often fixes the drag completely. In a smaller number of cases, the panel itself was under-built for its width, and we’ll tell you straight if that’s what happened. We won’t sell a new panel if a post fix is the answer. Call (817) 241-4067 for a free look.
Yes, and we do it on most Keller installations where the gate predates the current UL 325 entrapment protection standards. A 2000s-era gate in Keller typically has a control board that predates the photo-eye and edge-sensor requirements that are now standard. We can retrofit a modern safety photocell, loop detector, and edge sensor onto most existing gates, and we quote it as a line item, not a surprise add-on. The safety piece isn’t optional on a gate that closes automatically, and we won’t hand you a gate that can’t reverse on a test block. Call us for a written retrofit quote.
Yes, we install solar gate openers in Keller, and they’re a good fit for large-lot subdivisions where the driveway gate sits a long way from the house panel and running conduit isn’t practical. On quarter-acre to acre-plus lots, a solar operator with a battery bank can save the cost of trenching 150 feet of power line. Keller gets enough direct sun even in winter to keep a properly sized system topped off, though we size the panel and battery to the operator’s draw and the number of cycles per day, not a generic number. A solar install for a single swing or slide gate in Keller typically adds $700 to $1,600 to the operator cost. Call (817) 241-4067 and we’ll tell you whether solar makes sense for your lot.
Talk to a Real Person About Your Keller Gate Installation
If you have a gate in Keller that’s sagging, dragging, dead, or original to the house, call us. You’ll get a live person, not a voicemail, and we’ll set a time that works. Hal Gatewood has been at this since 2001, and the name is on the shop. We do our Gate Installation work the same way we’d want it done on our own driveway: plumb posts, proper hinges, a motor that isn’t fighting the soil, and a written price before we start. Call (817) 241-4067 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Keller since 2001.