Lock Repair in Fort Worth, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Lock Repair in Fort Worth, TX

Most gate locks in Fort Worth fail because of a misalignment in the post or a build-up of grit in the latch mechanism, not because the lock itself is broken. A sticky or non-latching gate isn’t just an inconvenience; it leaves your property unsecured. At Gatewood Fence & Gate, we handle onsite gate repair services including lock repairs, adjustments, and replacements for residential and commercial gates across Tarrant County. We don’t just swap out parts; we address the root cause, whether it’s a shifted gate post or a worn-out striker plate, ensuring your gate latches securely every time. If your gate won’t lock or the latch sticks, call us at (817) 241-4067 for an honest assessment.

I have been doing Gate Repair in Fort Worth since 2001. I have seen every type of latch failure, from rusted mag-locks on heavy iron driveway gates to simple gravity latches on backyard wood fences. When you call us, you aren’t getting a call center or a dispatcher who has never held a wrench. You are getting my expertise. We operate with a simple philosophy: if it can be fixed in your driveway, that is where we fix it. We don’t haul your gate off to a shop unless it is absolutely unavoidable, and we stand behind every repair with our 90-Day Done Right Promise. If the latch isn’t catching right three weeks later, you call me, and I will be back out there to make it right.

When You Need Lock Repair

A gate that doesn’t lock is a security risk, but you don’t always need a full replacement. Watch for these signs that your gate hardware needs professional attention:

• The gate bounces back: If you close your gate and it refuses to click shut, the latch assembly is likely misaligned with the striker plate. This is common in Fort Worth as our clay soil shifts during the hot, dry summers, causing posts to tilt just enough to throw off the locking mechanism.
• The key turns but won’t engage: If your key spins freely or feels gritty, the internal springs or pins in the lock cylinder have likely corroded. We often see this with older DoorKing or Elite systems where moisture has compromised the housing.
• The gate sags when it latches: If you have to lift the gate by the handle to get the lock to line up, you don’t just have a lock problem; you have a hinge or post problem. Fixing just the lock without fixing the sag is a waste of time, as the lock will break again in a few months.
• Rust or corrosion on the latch body: Surface rust is one thing, but if the metal is flaking or the latch mechanism is seized solid, it is time for a replacement. We see this frequently on gates exposed to constant irrigation sprinkler overspray.
• The electric strike won’t buzz or click: If you have an electronic access system and the lock isn’t releasing when you press the button, the problem might be electrical. We can trace the fault, whether it’s a bad solenoid or a wiring issue, and get your gate back to working order.

Our Lock Repair Process

When I show up to your property, I don’t start by selling you a new system. I start by looking at how the gate hangs. A gate that doesn’t close properly usually has a structural reason for it. Here is how we handle it:

1. Structural Inspection: Before I touch the lock, I check the hinges and the gate post. If the post is leaning, no lock in the world will keep that gate shut. I check the plumb of the post and the integrity of the gate frame itself.
2. Mechanism Testing: I manually cycle the lock to see where the friction is. I check the striker plate, the latch tongue, and the alignment of the catch. Often, a simple adjustment of the striker plate is all that is needed to get a smooth, reliable latch.
3. Cleaning and Lubrication: Many gate locks just need a deep clean. I remove the build-up of dirt, spider webs, and old, gummy grease that causes latches to stick. I use high-grade, weather-resistant lubricants that stand up to the Texas heat without attracting more dust.
4. On-Site Welding or Adjustment: If the latch plate has broken off or the mounting bracket is loose, I can weld it back securely right there in your driveway. I carry my welding gear on the truck so you don’t have to wait for a return trip.
5. Testing and Verification: Once the repair is complete, I cycle the gate at least ten times to ensure it latches every single time without force. I show you how it works and verify you are satisfied before I pull away.

Lock Repair Pricing in Fort Worth

I believe in upfront, transparent pricing. You should never be surprised by a bill when the work is done. Because every gate and every lock setup is different, the cost depends on whether we are performing a simple adjustment, a deep clean, or replacing specific hardware components like those found on Ghost Controls or Mighty Mule automatic gate repair systems.

We offer a free second opinion on any written estimate you have received from another company. If you are a senior or a veteran, ask about our permanent 10% discount. We also take $40 off any repair bill over $200. There is no trip charge for customers inside the county. Call (817) 241-4067 to get an exact quote for your specific gate.

FAQs - Lock Repair

How much does it cost to fix a gate lock in Fort Worth?

Most basic lock adjustments and alignments in Fort Worth cost between $95 and $165, depending on the complexity of the gate and whether any parts need to be replaced. If the issue is a simple mechanical stickiness due to dirt or misalignment, we can usually resolve it on the first visit. Call (817) 241-4067 for an exact quote on your repair.

Is it cheaper to repair or replace my gate lock?

It is almost always cheaper to repair the existing lock if the internal components are still sound, especially if the issue is just misalignment caused by ground shifting, rather than needing weld & rust repair. I will always tell you if a repair is just a “band-aid” fix that will fail again in a few months; if that is the case, I will recommend a replacement, but I will never push you to buy new hardware if your existing lock has years of life left in it.

Can you fix my gate lock today?

We do our best to accommodate same-day or next-day service requests, especially when security is a concern. Because I am the owner and I am the one doing the work, my schedule is straightforward. When you call (817) 241-4067, I can give you an honest idea of when I can get to your property.

Do you work on electric gate locks?

Yes, we are fully equipped to service electric gate repair needs including electric locks, magnetic locks and electric strikes on automated gates. We are certified to work on major brands like DoorKing and others, so whether it is a wiring issue or a failed solenoid, we have the tools to troubleshoot and fix it. Safety is always our priority with electrical components, so please do not attempt to open the control box or mess with the wiring yourself.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth.