Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWeld & Rust Repair in Fort Worth, TX
Our Gate Repair services for weld and rust issues on residential and commercial gates in Fort Worth typically cost between $150 and $450 depending on the extent of the corrosion and whether we can perform the work on-site. If your gate is sagging, dragging, or showing signs of structural failure, we can usually restore the integrity of the metal in a single visit, saving you the expense of a full replacement. We provide on-site welding services to fix issues right in your driveway, so you don’t have to worry about hauling a heavy gate to a fabrication shop.
If you are dealing with a gate that just doesn’t look or act right, give us a call at (817) 241-4067. We are a locally owned and owner-operated business, and I have been fixing gates in this area since 2001. When you call that number, you are talking to someone who actually knows how to weld, not a dispatch center in another state. Whether you need a quick patch or a more involved structural reinforcement, we handle it with the 90-Day Done Right Promise, which we put in writing on every invoice.
Rust is the natural enemy of any iron or steel gate in North Texas. Between the humidity we get in the spring and the harsh summer sun that breaks down paint and protective coatings, metal gates take a beating. When you start to see bubbling paint or red streaks running down your posts, that is not just a cosmetic issue. It is a sign that the metal is thinning. We specialize in Gate Repair in Fort Worth, and we see the same mistakes repeatedly: homeowners who try to patch rust with duct tape or cheap spray paint, only to find the gate hanging off its hinges a few months later.
When You Need Weld & Rust Repair
You do not need to wait until your gate falls over to give us a call. In fact, catching rust early is the difference between a simple repair and a full gate replacement. Here are the common signs that your gate needs professional attention:
- Visible Structural Cracks: If you see cracks near the hinges or where the gate meets the latch, those are stress points. These need immediate welding to prevent the gate from separating from the post.
- Excessive Dragging: When a gate drags on the driveway, it is usually because the hinge post has rusted at the base or the frame has lost its rigidity. We can weld bracing or reinforce the frame to lift it back up.
- Bubbling Paint or Flaking Metal: If the paint is bubbling, rust is already eating the steel underneath. We strip the compromised areas, grind down the rust, and seal the metal so it stops spreading.
- Loose or Detached Pickets: If your decorative iron pickets are rattling or have fallen off, it is usually because the original welds have snapped from years of wind load or vibration. We weld them back into place to restore the gate’s strength.
- Hinge Failure: If the gate is tilting, the hinges are likely pulling away from the frame due to rusted mounting points. We rebuild those mounting plates to ensure the gate swings true again.
These aren’t just inconveniences; they are security risks. A gate that doesn’t latch or drags on the ground is an easy target for anyone trying to force entry. If you have a system like a Ghost Controls or DoorKing operator attached to a rusting gate, the extra strain on the motor can burn it out, leading to a much more expensive Automatic Gate Repair down the road. We can fix the metal frame so your opener runs smoothly again.
Our Weld & Rust Repair Process
When I show up to your property, I don’t just look at the visible rust. I look at the structural integrity of the entire system. Because we have been doing this since 2001, we have seen how different gate designs hold up in the Fort Worth climate. Here is how we handle a weld and rust repair job:
- Site Inspection and Safety Check: We start by securing the area. High-tension gates and heavy iron panels can be dangerous if they are not supported correctly. We ensure the gate is stabilized before we touch it.
- Rust Removal: We grind down the affected areas to bare metal. You cannot weld over rust; if you try, the weld will fail immediately. We get down to clean, solid steel.
- Structural Reinforcement: If the metal has thinned too much to hold a new weld, we fabricate a steel patch or gusset to reinforce the area. This adds strength back to the gate frame.
- Professional Welding: We perform the weld on-site, ensuring full penetration for a lasting bond. We don’t just tack it; we weld it to last.
- Protective Coating: After the weld is cooled and cleaned, we apply a rust-inhibiting primer and a matching finish coat. This seals the repair from the elements so it doesn’t immediately begin rusting again.
I stand behind this process with our 90-Day Done Right Promise. If the weld doesn’t hold or the repair isn’t right, you call me, and I come back to fix it. That is the benefit of working with a local, owner-operated shop. My name is on the sign, and I am not going anywhere.
Weld & Rust Repair Pricing in Fort Worth
We believe in upfront pricing. You should never be surprised by an invoice when the work is finished. While every gate is different, we have standard pricing ranges for common welding repairs to help you know what to expect before you call us at (817) 241-4067.
| Repair Type | Estimated Range |
|---|---|
| Minor Hinge or Picket Weld | $150 – $250 |
| Structural Frame Reinforcement | $250 – $450 |
| Post Base/Mounting Plate Repair | $300 – $500 |
| Severe Corrosion/Custom Fabrication | Quote Required (Site Visit) |
These prices are estimates based on standard residential gate setups. We offer a permanent 10% discount for seniors and veterans, and if your repair is over $200, we take $40 off the total. We do not charge a trip fee if you are inside the county, and we are happy to provide a free second opinion on any written estimate you have already received from another company. If someone else told you that you need to replace your entire gate, call us first. Often, a few hours of skilled Electric Gate Repair work is all it takes to get another decade of life out of your existing system.
FAQs - Weld & Rust Repair
How do I know if my gate needs welding or a full replacement?
If the main structural frame is still solid but you have broken hinges, loose pickets, or rusted mounting points, it is almost always repairable. We only recommend replacement if the metal has rusted through to the point where there is no solid steel left to weld onto, or if the frame is so twisted that Gate Realignment cannot fix it. Call us at (817) 241-4067 for a free assessment, and we will give you an honest answer.
Can you weld my gate while it is still hanging?
Yes, in most cases, we perform the welding right in your driveway. We bring our own equipment and ensure the gate is properly braced and supported before we start working. This saves you the hassle of having to remove the gate or pay someone to haul it to a shop. We work on various systems, including those with Mighty Mule or Elite hardware, ensuring the electronics are protected from the welding process.
Why is my gate rusting so quickly?
Fort Worth weather, specifically the humidity and the heat, accelerates rust on any iron or steel that isn’t perfectly sealed. If the paint has been chipped by a lawnmower, a stray rock, or just years of sun exposure, the protective barrier is gone. Once that happens, moisture gets to the bare metal, and the rust spreads fast. We fix the structural issue and seal it to prevent the cycle from repeating.
Is it dangerous to try and fix a gate myself?
Yes, gates can be extremely heavy and are often under tension, especially if they are attached to an automatic gate opener system. Trying to weld a gate while it is under tension or improperly supported can lead to the gate collapsing, which can cause serious injury or damage to your driveway and property. We strongly recommend having a trained professional handle any welding or structural repairs to ensure the job is safe and the gate remains functional.
If you are tired of looking at a broken or rusting gate, we are ready to help. We have been serving the Fort Worth community since 2001, and we do the job right the first time. Give us a call at (817) 241-4067 for a free estimate, and let us show you why we are the name people trust for real, lasting repairs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth.