Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Colleyville
Gate access control in Colleyville means working on aging estate gates that were built to look impressive and run quietly for decades. Most of the systems we service around town were installed between the late 1980s and early 2000s, which puts their keypads, operators, and safety components squarely at the end of their service life. We’re Hal Gatewood’s crew at Gatewood Fence & Gate, and we’ve been repairing these systems since 2001. If your keypad is dead, your remote won’t open the gate, or you want video intercom added to a custom iron entry, call (817) 241-4067 and a live person answers, day or night.
Before you read further, here’s what you need to know: most Gate Access Control repairs in Colleyville run between $180 and $450 when the issue is a keypad, receiver, loop detector, or wiring fault. Full new installations, especially video intercom systems matched to stone pillars and ornamental iron, typically fall between $1,800 and $6,500 depending on gate weight and how far the power run stretches. You’ll get an exact written price before anything starts, never a number that changes at the door.
Why Gatewood Fence & Gate Is Colleyville’s Preferred Gate Access Control Company
The name is on the shop, and Hal has been answering that phone himself since 2001. That matters in Colleyville, where a lot of the gates we service were originally installed by companies that no longer exist. Homeowners here have been burned by national outfits that quote one price over the phone and show up with a different invoice. We don’t work that way. The price we quote is the price you pay, and it’s in writing before a single tool comes off the truck.
Our crew knows Colleyville’s neighborhoods and the specific systems that were popular when each was built out. We’ve worked along Montclair Drive, through the estates off Pleasant Run Road, and in the custom homes near McPherson Boulevard. When someone calls about an older LiftMaster or Elite operator on a heavy iron swing gate, we already know what we’re likely to find before we pull into the driveway. That local knowledge means fewer return trips and fewer parts swapped that didn’t need swapping.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no arguing about whose fault it is. He fixes gates, and when he finds sloppy work somebody left behind, he fixes that too. After 29 years of gate work and counting, the accountability is simple: you can drive to the shop and look him in the eye.
Our Gate Access Control Services in Colleyville
Keypad Entry
Keypad entry is the most common access control system on Colleyville estate gates, and the most common failure point we see after a North Texas freeze-thaw cycle. Water gets into a cracked housing, short a membrane switch, and suddenly the code you’ve used for ten years does nothing. We replace keypads with weather-sealed units rated for our climate, rewire the existing operator, and reprogram codes on site. A typical keypad replacement in Colleyville runs $180 to $340, including the new unit and the service call.
Video Intercom
On large Colleyville lots where the gate sits 150 to 300 feet from the house, video intercom is the upgrade that makes the most sense. You don’t just hear who’s at the gate; you see the car, the face, the package in hand. We install and integrate video intercom systems into existing ornamental iron columns and match the mounting to the stone work so it doesn’t look bolted on as an afterthought. Video intercom installation in Colleyville generally runs $1,500 to $4,200, depending on whether we can use existing conduit or need to trench new wire to the house.
Smart Access
Smart access puts gate control on your phone, which is useful on a Colleyville property where you might be at the back of a two-acre lot or away for a month at a time. You can open or close the gate remotely, grant a temporary code to a landscaper or pool company, and see an access log of who came and went. We program systems that work with existing operators, including legacy DoorKing and LiftMaster boards that need a retrofit module. Smart access upgrades typically run $350 to $900 in Colleyville, depending on the existing operator’s age and whether a cellular bridge is needed.
Card Reader
Card readers are less common on single-family Colleyville homes and more common on small private lanes or shared estate entries where a handful of properties share one gate. We install, program, and replace card reader systems from Linear and Viking, and we can convert an older phone-relay system over to card or keypad access without tearing out the entire gate operator. Card reader replacement or new installation in Colleyville typically runs $600 to $1,800 including the reader, controller, and on-site programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
Hal is certified to service nine major gate brands, and around Colleyville the work skews toward Linear, Viking, and DoorKing systems on the older estates. These were the brands that local fence and iron contractors specified when the city’s custom home boom peaked in the 1990s and early 2000s. We stock common parts for these brands so we’re not waiting a week on a relay or a limit switch. If your operator was built before smartphone control existed, we can usually retrofit it rather than telling you to rip out a perfectly good motor. Fixing what’s there before replacing what isn’t broken is how we work.
Common Gate Access Control Problems We See in Colleyville Homes
- Keypads dead after a freeze-thaw cycle. North Texas ice storms crack older keypad housings and short the membrane switch. The code stops working, even though the operator itself is fine. We replace the keypad with a weather-sealed unit and reseal the wiring entry so it survives the next storm.
- Loop detectors misreading after clay soil shifts. Colleyville sits on Blackland Prairie expansive clay. When the soil swells after heavy rain or shrinks during August drought, the saw-cut loop in the driveway shifts, and the detector no longer sees your car. Gates open randomly or won’t open at all when you pull up. We cut, splice, and reseal loops correctly for moving soil conditions.
- Undersized 1990s operators on heavy custom iron gates. The original opener was specced for a 300-lb panel. Then the homeowner upgraded to a 600-lb wrought-iron beauty. The motor has been straining for a decade and the drive gear is already stripped by the time we get the call. We replace the operator with a unit sized for the true panel weight, not the original spec sheet.
- Underground wire runs failing on long driveways. On Colleyville properties with the gate 200 feet or more from the house, the original low-voltage wire run was often direct-buried without conduit. After 25 years in clay soil, the insulation degrades and the keypad or intercom loses signal. We trench and run new conduit where it’s needed, which fixes the symptom instead of bandaging it.
Pricing for Gate Access Control in Colleyville, TX
Here’s what you can expect to pay for common gate access control work in Colleyville. Keypad replacement runs $180 to $340, including the new weather-sealed keypad and reprogramming. Remote control receiver repair or replacement typically runs $150 to $275 when the operator is still healthy. Video intercom installation runs $1,500 to $4,200, with the upper end covering long power runs and pillar matching on estate properties. Smart access retrofits run $350 to $900. Full phone entry systems for gates far from the house run $900 to $2,200. Every price is quoted and agreed in writing before work starts. There’s no trip charge inside the county, we offer $40 off any repair over $200, and there’s a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate; Hal will give you a number you can take to the bank.
Colleyville’s specific conditions push prices one direction: the older systems on these estates often need more than a parts swap. When a gate has been straining against the wrong motor for a decade, you’re fixing the symptom and the cause in the same visit. That’s not a markup; it’s the difference between a gate that works for six months and one that works for the next ten years.
Because Colleyville sits on Blackland Prairie expansive clay, gate post footings heave seasonally. A misaligned swing or slide gate here is usually a footing problem, not a panel problem. In Bedford or Hurst, where the soils are more stable, you might get away with adjusting the hinge. In Colleyville, if we don’t address the footing movement underneath the access control system, the new keypad and loop detector are going to be out of alignment again by next spring. That’s a local fact, and it changes how we diagnose problems here.
We Also Serve Cities Near Colleyville
Our crew handles Colleyville service calls daily, and we regularly work in Bedford, Hurst, North Richland Hills, and Keller for the same customers we’ve served for years. If your gate is on the Colleyville side of the line or just across it, the phone number is the same: (817) 241-4067. You’ll still get a live person, a written price, and the same 90-Day Done Right Promise on every job.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Colleyville
Your gate is going out of alignment every spring because Colleyville sits on Blackland Prairie expansive clay that swells with spring rain and shrinks during summer drought, heaving the concrete post footings and moving the gate out of plumb. The panel isn’t bending; the post is moving underneath it. The fix is to re-set the post footing deeper and wider, then recalibrate the operator and safety edges so the gate has room to move with the soil instead of fighting it. If you’re tired of straightening the same gate every year, call (817) 241-4067 and we’ll look at the footing, not just the hinges.
Yes. We mount video intercom panels to match the stone and ironwork already on your gate, and we’ve done it on custom estates across Colleyville, including work along Montclair Drive. The goal is a unit that looks like it was part of the original masonry plan, not a plastic box zip-tied to a stone column. We match the mounting surface, route the wiring inside the pillar where possible, and use housings that hold up to North Texas weather. Call (817) 241-4067 and we’ll bring samples to your driveway before you commit to anything.
If the gate is heavier than it used to be because the previous owner upgraded the panel to a thicker custom iron design, the original operator has likely been straining against a load it was never built to carry. The motor may still run, but the drive gear and limit switch are wearing out faster than they should, and the gate can fail mid-swing without warning. We’ll measure the true panel weight, check the drive gear, and tell you honestly whether the operator should be replaced or can be retrofitted. A replacement operator in Colleyville sized for a heavy custom gate typically runs $1,200 to $3,800 installed. Call (817) 241-4067 and Hal will give you a straight answer.
The simplest test is to block the beam while the gate is closing and see if it reverses. If it doesn’t reverse, the photocells are dead, misaligned, or bypassed. On older Colleyville estate systems, we often find photocells that were never re-aimed after a footing shift moved the posts. A gate that closes on a car, a grandkid on a bike, or a delivery driver is a serious liability. We test, realign, or replace photocells on every access control service call, and we’ll show you the test working before we leave. Call (817) 241-4067 to schedule a safety check.
The best way is a cellular-based phone entry system that doesn’t require trenching new low-voltage wire all the way from the house. On a 200-foot run through Colleyville clay, that trench is expensive and disruptive, and a cellular unit sidesteps it entirely. You get a keypad or call button at the gate that dials your cell phone when someone arrives, and you can open the gate remotely from anywhere. Installed cost for a cellular phone entry system in Colleyville typically runs $900 to $2,200. Call (817) 241-4067 and we’ll walk the lot with you and show you the options that fit your property.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.