Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair Services in Azle, TX
If your gate is dragging on the ground, leaning at the hinge post, or the opener quit responding sometime between last night and this morning, you’re in the right place. Gatewood Fence & Gate covers Azle with a live person on the phone at (817) 241-4067, any hour, any day. Hal Gatewood has been fixing gates since 2001, and when you call about a broken gate in Azle, the person who shows up works for him, not a subcontractor. Most repair calls around Azle get same-day attention, especially when a gate won’t close and you’ve got horses, dogs, or a driveway you’d rather keep private.
We know Azle’s gates because we work on all of them: the ornamental iron at the front of Ash Creek, the 16-foot pipe and cattle-panel ranch gate off FM 730, and the wooden swing gate that’s been leaning on a 1970s ranch house since before the subdivision grew up around it. Same crew, same truck, same phone number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Azle Homeowners Choose Gatewood Fence & Gate
Homeowners around Azle tend to call us after someone else has already made a mess of things. Maybe a national outfit quoted one price over the phone and then “found something” once the gate was apart. Maybe a handyman welded a hinge on crooked and vanished. Hal gets genuinely annoyed when he sees work like that, because he has to undo it before he can fix the gate. The name on the shop is his, the address is published, and if something isn’t right within 90 days, one call brings him back. That’s the 90-Day Done Right Promise, in writing on every job, and it applies to work done in Azle the same as anywhere else.
You’ll find our trucks in neighborhoods like Ash Creek and Silver Creek, and out along the county roads that run through Azle’s ETJ where the lots get bigger and the gates get heavier. A live person answers the phone 24/7. Not a recording, not a call center three states away. We publish the shop address. You can look us up, or drive over and look Hal in the eye.
We hold ourselves to a standard a lot of companies won’t: if it can be welded in your driveway instead of hauled off, we weld it in your driveway. If a part can be cleaned, adjusted, and made right for another five years, we tell you that before we sell you a replacement. That repair-first approach is why Azle homeowners who’ve been burned before end up staying with us.
Gate Repair Services We Offer in Azle
Gate Repair
A sagging gate usually isn’t a bent frame; it’s a hinge post that has shifted in moving clay soil. We re-set posts, replace hinges, straighten frames, and weld cracks on site so your gate stays in your driveway where it belongs. If your gate is dragging a groove across the concrete at the latch end, that groove is the symptom, not the problem.
Learn more about our Gate Repair in Azle.

Gate Installation
Whether you’re replacing a rotted wooden post gate on a 1980s ranch house or putting in a new ornamental iron driveway gate in a newer subdivision, we quote the full job up front and you approve the number before any work starts. We measure on site, order precisely, and set posts deeper than the frost line and deeper than the clay heave zone.
Learn more about our Gate Installation in Azle.

Gate Motor & Opener
We service and install automatic gate openers from brands like LiftMaster, FAAC, BFT, Viking, and Mighty Mule. In Azle, a lot of those openers are solar-powered units mounted on cedar posts at the end of a gravel driveway. We know how to diagnose a failing battery, a bad photocell, or a control board that a North Texas ice storm worked over.
Learn more about our Gate Motor & Opener in Azle.

Gate Access Control
Gate Access Control - Azle covers keypads, intercoms, telephone entry, and vehicle sensor loops. If your gate opens when it shouldn’t or won’t open when you punch in the code, we test the system as a whole, not just the box on the post. We handle wired and wireless systems, and that includes the safety edges and photo eyes that keep the gate from closing on a car, a kid, or a dog.

Gate Parts & Welding
Sometimes the gate itself is fine and the problem is a hinge pin that’s worn oval, a latch that doesn’t catch, or a weld that cracked at the post - exactly the kind of issues our Gate Parts & Welding in Azle handles. We keep a truck stocked with common hinges, latches, wheels, and motor parts, and we weld on site. If it’s a broken post, we’ve got the equipment to dig it, re-set it, and weld the gate back square.

What to Look For When a Gate Goes Wrong in Azle
Here’s the comparison we’d make if you were standing in your driveway with us. There are companies that will look at a sagging gate and tell you the gate needs replacing. There are companies that will sell you a new opener because the circuit board got wet. And then there’s a company that will tell you the truth: Azle’s clay soil moves, and a post that was set 18 inches deep in 1995 has been heaving every spring and shrinking every August for almost 30 years. We find the actual cause first. If the gate panel is sound and the post is rotted, we replace the post and re-hang your gate. If the opener motor is fine and the battery is dead, we replace the battery. It sounds obvious, but a lot of people have paid for gates and openers they didn’t need.
That repair-first approach is also why we publish a 90-Day Done Right Promise instead of a warranty you have to fight for. If it isn’t right, Hal comes back and makes it right. The name on the invoice is the name on the shop.
Neighborhoods We Serve in Azle
We work all through Azle, from the older ranch-style streets near Central Park to the newer construction and acreage properties spreading to the north and east. You’ll see the truck in these spots most weeks:
- Ash Creek
- Silver Creek
- Woodland Springs
- Deer Ridge
- The FM 730 corridor and rural lots in Azle’s ETJ
Typical response time for a repair call anywhere in Azle is same-day when you call before early afternoon, and often the next morning for calls that come in later. Emergency calls, like a gate stuck open with livestock or a driveway that won’t close, get priority.
Why Azle’s Climate & Housing Affect Gate Repair
Azle sits right at the line where Fort Worth suburbia turns into Parker County ranchland, and that shows up in the gates. On one street you’ll have an ornamental iron driveway gate on a newer tract lot, and two minutes later you’re on a gravel drive off FM 730 looking at a 16-foot pipe gate with a solar opener bolted to a cedar post. That mix is more pronounced in Azle than in our Keller service area or Saginaw, and it means our repair calls are all over the map: a hinge weld on a suburban iron gate one hour, a dead solar charge controller on a horse property the next.
The other big factor is the soil. The Blackland clay around Tarrant and Parker counties doesn’t hold still. Spring rains make it swell; a long dry summer makes it shrink and pull away from the post. A wood post gate on a 1970s or 1980s ranch house that’s spent decades in that cycle will rot at the base and lean. Every time we’re called to an older Azle home with a leaning gate, the first thing we check is whether the post is still sound below the dirt. Most aren’t. Re-setting those posts, setting them deeper, and packing them with concrete that can handle the movement is the difference between a gate that lasts three more years and one that lasts twenty.
Pricing for Gate Repair in Azle
We price everything up front, and the number we quote is the number you pay. No “additional findings” surprise at the door. For an honest frame of reference around Azle:
- Hinge replacement and realignment on a standard residential swing gate: $180-$350
- Post re-setting (single post, dug and concreted): $250-$500
- On-site weld repair (cracked frame, broken hinge weld): $80-$250
- Opener or control board diagnosis and repair: $150-$450
- Solar opener battery replacement: $120-$280
We don’t charge a trip fee inside the county. There’s a $40 discount on any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. If you’ve got the gate in front of you and a number in mind from another company, call and we’ll tell you over the phone whether the price sounds right and what’s actually involved.
Service Area - Cities Near Azle
The same crew that works Azle covers nearby cities too. You’ll find us in Haslet, Keller, Haltom City, and Fort Worth. If you’re just outside the Azle city limits on a county road or a larger acreage property, give us a call and we’ll tell you straight if we cover your road.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Azle
Most gate repairs in Azle run between $180 and $500, with simple hinge realignments starting near the bottom of that range and full post re-sets at the top. The exact price depends on what the gate is made of, how deep the post is set, and whether the opener is involved. Call (817) 241-4067 for a free, no-pressure quote, and remember the price is agreed before we start.
Usually yes. If your gate is stuck open, won’t close, or a motor died and you’ve got animals or a driveway you need secure, call early and we’ll get a truck to your Azle property the same day whenever possible. Overnight and weekend calls get answered by a live person too.
Yes, and that’s a big part of our work along FM 730 and the county roads. Most solar opener problems come down to a tired battery, a corroded connection, or a panel that’s shaded or angled wrong, and we diagnose and fix those in the driveway rather than selling you a whole new opener.
Sometimes the frame itself is bent and a weld repair does it. But in Azle, a leaning gate is much more often a sign that the post has shifted or rotted in clay soil. Welding a crooked frame onto a moving post just moves the problem. We check the post first, and we’ll tell you honestly what needs fixing.
We do, and it’s free. Bring us the written estimate, and we’ll look at the gate and tell you if the work listed is actually the work the gate needs. Often the answer is “no, not all of it,” and we’ll show you exactly which part we’d skip and why.
Call Gatewood Fence & Gate in Azle
If your gate needs work in Azle, call (817) 241-4067. You’ll get Hal or someone who works for him, and you’ll get an honest answer about what’s wrong, what it costs, and when we can be there. Free estimates, no trip charge inside the county, and a 90-Day Done Right Promise on every job. The shop is local, the truck is local, and the name on the invoice is the same one that’s been answering the phone since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Azle, TX with honest gate repair, installation, and opener service. Home
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Azle Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond





Before
After
Before
After
Before
After