Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lakeside
Gate parts and welding in Lakeside usually comes down to one thing: finding someone who will repair the hinge post instead of selling you an entire new gate. Most gate failures we see along Eagle Mountain Lake start at the hinge or the weld seam, and both can be fixed on site without hauling your gate away. We have been doing exactly that since 2001, and Hal Gatewood’s name is on every invoice. If your gate is sagging, dragging, or the latch no longer lines up, call (817) 241-4067 and talk to a live person who knows Lakeside’s gate problems better than anyone.
Why Gatewood Fence & Gate Is Lakeside’s Preferred Gate Parts & Welding Company
Lakeside is not like servicing a subdivision off a highway loop. It’s a lake town with waterfront estates, long private driveways, and ornamental ironwork that takes a beating from southerly winds off Eagle Mountain Lake. We know which hinge manufacturers hold up here and which ones fail inside three seasons. The person who answers your call understands what salt-laden moisture does to a welded steel frame, because he has cut out and replaced those exact welds in Lakeside driveways for decades.
Hal owns the company and still works on gates. That’s not a marketing line. It means when a homeowner on Shoreline Drive calls about a gate that won’t close at 9 p.m., the response comes from someone who has personally replaced hinge posts along that shoreline. We are locally owned and owner-operated, with a published address and license number anyone can look up. Our crew is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. Not fine print. Plain language.
Response time to Lakeside is typically same-day for emergency hinge and post work when you call before noon. We don’t route you through a voicemail tree or a call center. A live person answers, 24/7, and tells you when the crew can be there. No trip charge inside the county, and if you have a written estimate from another company, bring it in for a free second opinion.
Our Gate Parts & Welding Services in Lakeside
Hinge Replacement
Swapping a worn hinge on a heavy ornamental gate is not a parts-catalog job near the water. Lakeside’s lake-driven humidity rusts standard steel hinges fast, so we spec heavy-duty stainless or wind-rated hinges as a baseline on any lake-facing property off Eagle Mountain Lake’s southern shore. A hinge that’s already sagging has usually ovaled out its bolt holes too, and a new hinge on an enlarged hole will fail just as fast as the old one. We repair the mount, realign the gate, and set it so the latch actually catches.
Post Replacement
Gate posts lean in Lakeside because Tarrant County’s black gumbo clay expands and contracts through every wet-dry cycle. A post that was set properly ten years ago can still heave off plumb. We dig out the old footing, reset with a deeper concrete pour and galvanized post base, and brace the post while it cures. Then we rehang the gate, re-weld the hinge plates, and leave you with a post that stays plumb through the next drought-and-rain cycle. Replacing just the panel and ignoring the post means you will pay for this twice.
Rail Repair
Weld seams on painted steel gates crack from the constant wind-blown moisture off the lake. You will see it first as a hairline crack at a top rail joint, then as a sag in the middle of the panel. We grind out the broken weld, re-weld the joint, and reinforce the rail with a gusset plate where the design allows. If the frame itself is too far gone, we will tell you straight and show you exactly where the metal failed before we ever quote a replacement.
Custom Welding
Some Lakeside gates don’t have a part number. They’re custom ironwork on a lakefront estate, and the original fabricator is long out of business. We weld on site, in the driveway, so the gate never leaves your property. We work with galvanized steel, stainless, and wrought iron, and we know how to weld galvanized without burning off the corrosion protection that keeps your gate alive in this climate. From sag correction plates to full rail rebuilds, Hal’s crew welds it where it stands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeside
We are certified to service nine major gate and operator brands, including DoorKing, Elite, and Ghost Controls. When your Lakeside gate opener strips a gear or a board corrodes from shoreline humidity, we can get the correct replacement part ordered without sending you to an online catalog blind. Hal stocks common hinge pins, rollers, brackets, and latch hardware in his shop, so many Lakewood-area repairs don’t wait on shipping. If it’s a part we don’t keep on the shelf, we tell you the real lead time before we start. No guesswork on the invoice.
Common Gate Parts & Welding Problems We See in Lakeside Homes
- Corroded hinge posts on lake-facing lots. Prevailing southerly winds carry moisture and salts off Eagle Mountain Lake straight into gate hardware. Steel welds and painted hinges on the south and east sides of a property fail first, and often within a few years of installation.
- Leaning posts from black gumbo soil movement. Tarrant County’s expansive clay pushes posts out of plumb as it swells and shrinks seasonally. A leaning post throws the gate’s weight onto the latch and the top hinge, which accelerates wear on both.
- Cracked weld seams on ornamental steel gates. Wind-driven flexing plus corrosion equals welds that crack along the top rail. The gate starts to sag in the middle, the latch drifts out of alignment, and eventually the panel won’t close at all.
- Corroded battery terminals on solar gate operator boxes. Constant humidity near the shoreline eats at battery terminals and connectors inside solar boxes. The operator may test fine in the afternoon sun but fail to hold a charge overnight.
Pricing for Gate Parts & Welding in Lakeside, TX
Here are honest numbers for Lakeside. A single hinge replacement typically runs $125 to $220 per hinge, including labor, with stainless hardware roughly $40 to $75 more per hinge than steel. A gate post replacement, including concrete footing removal, new post, and rehanging the gate, generally falls between $475 and $1,100 depending on post size and whether we’re resetting one post or a pair. Custom welding jobs run $95 to $160 per hour plus materials, and most rail repairs finish in two to four hours. A full sag correction with post reinforcement commonly lands between $650 and $1,400.
You will get the exact price in writing before any work starts, and that price does not change at the door. Your estimate is free. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a quote that means what it says.
We Also Serve Cities Near Lakeside
Our Gate Parts & Welding crew works throughout the western Tarrant County lake region. In addition to Lakeside, we provide the same on-site welding, hinge replacement, and post work in Fort Worth, Colleyville, North Richland Hills, and Hurst. If you’re just outside the Lakeside city line, call anyway. The no-trip-charge applies inside the county, and Hal will tell you straight if we can get there this afternoon.
Serving Lakeside, TX - Our Local Coverage Area
We’re based in the Lakeside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lakeside
Gate hinges fail faster on waterfront lots in Lakeside because prevailing southerly winds drive salt-laden moisture from Eagle Mountain Lake directly into hinge pins and plates, accelerating corrosion years ahead of the same hardware in drier inland suburbs. The fix is stainless hardware and wind-rated hinges as a baseline on any lake-facing property. If your gate sits within a few hundred yards of the shoreline and the hinges are original painted steel, expect to replace them far sooner than the manufacturer’s general lifespan. Call (817) 241-4067 and we will inspect the hinge wear and tell you exactly what remains serviceable.
If your gate is sagging, the hinge post is almost always the root cause, and replacing just the panel fixes nothing for long. In Lakeside’s shifting black gumbo soil, posts lean and heave over time, and hanging a new panel on a bad post means you will pay for the panel twice. We always check post plumb before quoting any panel or hinge work, and we will show you what we find. A sag correction plate and a reset post often cost far less than a new gate, and we stand behind it with the 90-Day Done Right Promise.
Yes, we weld galvanized steel gate frames in Lakeside while preserving as much corrosion protection as possible. We grind back the zinc coating only in the immediate weld zone, use appropriate welding technique for the material thickness, and then apply a cold galvanizing compound to the weld and surrounding area. On lake-facing gates near Eagle Mountain Lake, this step matters more than anywhere inland. We have been welding galvanized frames on waterfront estates for decades, and we specify stainless hardware and cold-galvanize every repaired joint as standard.
Yes, automatic slide gates in Lakeside frequently need different or upgraded track and rack work because Tarrant County’s expansive clay shifts beneath the track base and throws alignment off. A slide gate on an irregular lakefront lot with a sloped driveway is even more prone to this. We use adjustable track systems and reinforced base plates where the soil conditions call for it, and we verify the rack and pinion mesh is correct before we leave. A gate that rolls smoothly in March may bind by August if the track is set wrong, so we set it for the soil as much as the gate.
After a North Texas ice storm, check your gate operator board for moisture intrusion, look for cracked wire insulation where ice expanded inside connectors, and verify that safety photocells are still aligned. Freezing water inside an operator housing can crack seals and strip gears, and the board may not fail until weeks later when corrosion spreads. If your gate moved stiffly during the freeze or you forced it open, call (817) 241-4067 and we will inspect the operator, board, and photocells before the next storm season hits Lakeside.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Lakeside
If your gate is sagging, dragging, or the welds have cracked, don’t wait until a hinge tear-drop rips the post and the whole panel drops into the driveway. Call Gatewood Fence & Gate at (817) 241-4067 for a free estimate. A live person answers around the clock, and Hal Gatewood stands behind every weld, hinge, and post with a 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeside since 2001.