Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Azle
Gate parts fails and metal breaks. That’s the plain truth of it. In Azle, we see hinge posts cracked at the footing from clay heave, sagging 16-foot pipe gates on FM 730, and Azle Gate Motor & Opener systems that quit mid-cycle on short winter days. Our Gate Parts & Welding team fixes what’s actually wrong, not what’s easiest to swap. Hal Gatewood has been at this since 2001, and when you call (817) 241-4067, a live person picks up. Not a recording. Not a call center three states away. Somebody who knows Azle’s dirt, Azle’s gates, and exactly what your repair will take.
Why Gatewood Fence & Gate Is Azle’s Preferred Gate Parts & Welding Company
We work in Azle every week. That matters because Azle is not Keller and it’s not Fort Worth. The gate stock here spans a wide spectrum: ornamental iron in newer subdivisions off 730, welded pipe and cattle panel on hobby farms, and everything between. Hal has stood in the driveway, looked at the gate, and said plainly what needs to happen. That’s why our Azle customers keep our number saved. We answer 24/7, show up in the window we promised, and every job leaves with our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
The same person who quotes the job is usually the person who does the job. That’s not a corporate slogan. The name on the shop is Hal Gatewood’s name, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Azle
Most gate failures start at the hinge post or the hinge itself. We repair the post, true the hinge, and reinforce the spot that failed. We don’t replace gates that can be saved. Here’s what we handle across Azle:
Hinge Replacement
On Azle acreage, we regularly see hinge barrels stretched and wallowed out from years of a heavy gate pulling on them. The fix is cutting off the old barrels, re-welding new ones at the correct load angle, and greasing everything before we leave. A gate sags in the hinge post, not in the middle. That’s where we start.
Post Replacement
Blackland-adjacent clay does two things every year: swells with spring rain and cracks away in summer drought. Your gate post moves with it. In Azle, post replacement means digging deeper than the frost line and the shrink-swell zone, setting in concrete, and bracing until cured. We don’t backfill with loose dirt and call it done. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Bottom rails on steel gates rust from the inside out, especially where Azle’s clay holds moisture against the metal. We cut out the rotted section, weld in new square tube, grind it smooth, and prime and paint the joint. On ornamental gates, we match the picket and rail profile so the repair disappears into the original design.
Custom Welding
This is the work we like best: cutting and welding on site so your gate never leaves the property. We’ve built cattle panel inserts into existing pipe frames off FM 730, fabricated custom latch plates, and extended gate leaves to close gaps. MIG on thick-wall pipe, TIG on ornamental aluminum. If it’s steel or aluminum and it’s attached to your gate, we can fix it in your driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Azle
We’re certified to work on nine major gate brands, and we carry common parts and Gate Access Control in Azle boards in the truck for DoorKing, Elite, and Ghost Controls. That means fewer trips back to the shop and faster turnaround on your Azle repair. When your Mighty Mule or Elite opener is not talking to the remote, we diagnose it on site and usually have the part in hand. Solar openers included.
Common Gate Parts & Welding Problems We See in Azle Homes
- Clay heave cracking hinge post footings: On long gravel driveways, the soil expands and contracts every season. The concrete footing cracks, the post leans, and the gate sags until the latch misses. We re-set the post deeper and re-weld the hinge barrels true.
- Solar opener under-voltage in short winter days: Gates off FM 730 and the ETJ roads run on solar because mains power is impractical. Come December, the battery drops below the control board’s threshold and the gate stops mid-cycle. We test the panel output, replace tired batteries, and recalibrate the travel limits.
- Cedar posts rotted at ground contact: Years of clay moisture against wood does its work. The post rots, the operator torques it, and the rack or chain drive takes the punishment. We replace the post with steel or a properly treated timber and rebuild the operator mount.
- Sagging 16-foot pipe ranch gates: Heavy wall pipe spans wide entrances. Over time the unbraced end drops. We weld a diagonal tension brace, rebuild the hinge post saddle, and reset the pins so the gate swings free and true, even with a rider in the driveway.
Pricing for Gate Parts & Welding in Azle, TX
A hinge replacement on a standard residential swing gate in Azle typically runs $185-$320. Re-setting and re-securing a shifted or leaning gate post runs $275-$520 depending on depth of the footing and whether concrete removal is involved. Custom welding work - rail repair, bracket fabrication, panel insertion - is quoted by the inch and by the material, but most Azle jobs we do land between $140 and $700. Here’s the breakdown:
- Hinge replacement (pair): $185 - $320
- Post re-set / replacement: $275 - $520
- Rail repair and weld patch: $140 - $380
- Custom welding (full-height gate brace or panel insert): $300 - $700
You’ll get a written price before any work starts. Not an estimate that changes at the door. The number we quote is the number on the invoice. We also run standing offers that don’t need haggling: $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Call (817) 241-4067 and Hal or his crew will come out, look at the gate, and tell you straight what it costs.
We Also Serve Cities Near Azle
We run calls to Azle every week and serve the surrounding towns. Our Gate Parts & Welding crew works in Haslet, Keller, Haltom City, and Fort Worth. Same crew, same 90-Day Done Right Promise, same live person on the phone.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Azle
Azle sits on expansive, Blackland-adjacent clay. Keller and Saginaw have more developed soils and smaller lots. Azle’s clay swells with spring rains and cracks away from post footings in the summer drought. That seasonal movement heaves and leans posts. It’s a recurring condition here, not a one-time event. We address it by setting posts deeper in concrete and often adding a steel core. If your post has been leaning and re-leaning, call (817) 241-4067. We’ll get it plumb.
Yes. We do this regularly on Azle acreage. The process is cutting the panel to the frame’s inside dimensions, welding it to the middle rails, then adding a top rail cap if needed. We do the work on site in your driveway. Expect this to run $300-$700 depending on the panel gauge and the rail condition. Delivery and setup are part of the quote, agreed before we strike an arc.
We do. Both brands are in our certified service list. On solar-powered installs off FM 730 and in the ETJ, the usual culprits are tired batteries, corroded panel connections, and control boards that dropped below voltage. We test the full circuit and tell you exactly what’s dead and what still has life. Call (817) 241-4067 for a service visit. We’re in Azle every week.
Probably not, but it may involve both. Frozen hydraulics usually mean a cracked seal or moisture in the line, which is an opener repair, not welding. But we often find freeze damage at the hydraulic cylinder’s mounting bracket where it’s welded to the gate frame. That’s a welding fix. We’d assess the bracket welds and the hydraulic circuit on the same trip. Either way, the price is quoted and agreed before any work begins.
Three things: a post set deeper than the shrink-swell zone with a solid concrete footing, a diagonal tension brace from the bottom hinge corner to the top latch corner, and hinge barrels welded in a true vertical line. Skip the brace and the gate will drop again within two years. We’ve rebuilt enough 16-footers to know. For a written quote on your Azle gate, call (817) 241-4067.
Why Azle’s Gate Stock Demands Both a Welder and a Diagnostician
Here’s what sets Azle apart. Drive the rural roads off FM 730 and you’ll pass newer subdivisions with ornamental iron swing gates and automatic openers. Keep going and you’ll hit hobby farms with 16-foot pipe-and-cattle-panel entrances, solar-charged openers bolted to cedar posts, and horses watching you from the fence line. That dual residential and rural mix means a single service call often requires MIG welding on thick-wall pipe and diagnostic work on a solar gate opener. Somebody who only knows openers can’t fix the hinge post. Somebody who only welds can’t address the control board. We do both. It’s why our Gate Parts & Welding in Azle call list runs long.
Off FM 730, we rebuilt a sagging 16-foot pipe swing gate on a horse property where the hinge post had cracked at the post footing from clay-soil heave, and the LiftMaster solar Gate Installation - Azle opener was dropping the gate short of the latch. Our tech re-set the post in a deeper concrete footing, trued the hinge post and re-welded the hinge barrels, then recalibrated the opener’s travel and tested the safety photocell with a rider in the driveway. The gate now closes fully and holds entrapment protection. That kind of job is not a one-off for us. It’s a Tuesday.
Azle’s mix of clay-soil acreage and solar-powered ranch gates shapes real welding and parts decisions. Not just part numbers, but post footings, hinge-post load, and entrapment protection on sloping gravel drives. You need someone who understands how the soil under the post and the sun on the panel both affect the gate. That’s what we bring.
Ready for a Straight Answer on Your Gate?
Call Gatewood Fence & Gate at (817) 241-4067. Tell us where you are in Azle and what the gate is doing. We’ll schedule the visit, show up in the window we gave you, and hand you a written price before anything gets torched or turned. The 90-Day Done Right Promise is on every invoice. If it’s not done right, we make it right. That’s the deal Hal has run since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Azle and surrounding Parker and Tarrant county communities.