Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook runs $1,800 to $6,500 for most residential jobs, depending on the gate type, material, and whether you’re adding an automatic opener. We schedule a free measure within a few days, hand you a written price before any work starts, and stand behind the finished job with our 90-Day Done Right Promise. Hal Gatewood has been doing this since 2001, and if you call (817) 241-4067, a live person picks up the phone.
Why Gatewood Fence & Gate Is Benbrook’s Preferred Gate Installation Company
We work the cove-side streets off Winscott Road, the ranch-style neighborhoods around Timber Creek, and the newer south Benbrook developments where ornamental iron driveway gates are the norm. That local mileage matters because a gate installed near Benbrook Lake faces conditions a gate in Haltom City never will. The morning fog off the reservoir settles into every hinge, weld, and operator box. Clay soil underneath shifts the posts. A crew that doesn’t understand that will install a gate that looks fine for eighteen months and then starts dragging, rusting, or binding.
Hal Gatewood’s name is on the shop and on every invoice. He’s the person you’ll talk to when you call, and often the person who shows up with the welder. Benbrook customers tell us the same thing: they’d rather pay once for a gate that stays square than twice for a gate somebody else didn’t set deep enough. Our published address and license number are verifiable, and the live-person phone answer isn’t a sales line. It’s how we’ve worked for over 29 years.
Our Gate Installation Services in Benbrook
Driveway Gate
Most driveway gate installations in Benbrook are on lots with enough frontage for a double swing or a slide gate. We measure the opening, check the soils where the posts will set, and spec the gate for how it will actually be used: daily vehicle traffic, a boat trailer, a horse trailer, whatever you’re pulling through. A driveway gate near the lake should be powder-coated aluminum or stainless-fitted steel if you want more than a few rust-free years.
Pedestrian Gate
Side-yard pedestrian gates in Benbrook’s 1970s and 1980s ranch neighborhoods are often original to the house and tired. We build walk gates to match the existing fence line, with self-closing hinges where code requires them, and we set the posts below the active clay line so the gate doesn’t shift along with the soil. This is the Gate Installation work we do most often alongside full fence projects.
Sliding Gate
A slide gate is the right call on Benbrook lots where the driveway slopes, or where a swing gate would fight the grade every time it opened. These are popular on lake-adjacent properties with narrow frontage and newer south Benbrook builds with ornamental iron entries. We install the track, cantilever hardware where the driveway allows, and the operator. The control box gets weather sealing that actually holds up to reservoir fog.
Swing Gate
Swing gates are the classic Benbrook driveway gate, and they’re also the ones most likely to fail when the Vertisol clay under the hinge post shrinks in August and heaves in April. When we install a swing gate, we dig the post footings deeper than most crews will, into stable soil below the clay’s active movement zone. That’s the difference between a gate that latches for a decade and one that’s out of alignment by the second spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re certified to service and install nine major gate brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Benbrook customer has an existing operator and wants to keep it, we stock common parts so we’re not waiting on a warehouse two weeks out. When the brand on the box doesn’t matter as much as how it survives lake humidity, we’ll steer you toward equipment we’ve seen hold up on cove-side properties. No upsell. Just what works here.
Common Gate Installation Problems We See in Benbrook Homes
- Hinge posts tilting in the clay. Benbrook’s heavy black Vertisol clay shrinks in summer drought and heaves after rains. That movement slowly tilts gate posts, which pulls the gate out of latch alignment and makes the operator strain. We set footings below the active clay line to stop it.
- Rust at welds and hinge areas. Galvanized steel gates near Benbrook Lake rust at the welds and hinge pockets within a few years, even when the rest of the frame looks fine. Morning fog and reservoir humidity accelerate it. Powder-coated aluminum or stainless fittings are the fix.
- Operator board failures from condensation. Slide gates on lake-adjacent properties sit in fog that seeps into control boxes that were never sealed for it. We replace failed boards and weatherproof the housing properly, so you’re not buying a new board every other winter.
- Gates that drag or won’t latch after a wet spring. When the clay heaves, the panel drops or the post moves and the latch misses. This is the single most common call we get in Benbrook between March and May, and it’s almost always a footing problem, not a hinge problem.
Pricing for Gate Installation in Benbrook, TX
A single swing gate in Benbrook typically runs $1,800 to $3,200 for a steel panel with manual operation. A double driveway swing gate installed with an automatic opener lands between $4,000 and $6,500 depending on the length, material, and whether we’re running new conduit for power. Sliding gates start around $3,500 for a basic manual track setup and go up from there when you add a cantilever system and operator. Pedestrian gates are the entry point: $600 to $1,400 installed, including the new posts. Powder-coated aluminum runs about 15 to 20 percent more than galvanized steel upfront, and on a lake-adjacent Benbrook lot it pays for itself in rust prevention. The price we quote is the price you pay, agreed in writing before any work starts. We don’t add a trip charge inside the county, and we’ll give you a free second opinion on any written estimate you’ve gotten from somebody else.
We Also Serve Cities Near Benbrook
Most of our work is Benbrook proper, but we install gates regularly in Fort Worth, Colleyville, North Richland Hills, and Hurst. If you’re just outside the Benbrook line, call and ask. The measuring visit is free, and we’ll tell you straight whether we can take the job.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
Benbrook’s proximity to the reservoir creates a persistent morning fog and higher ambient humidity that settles on metal surfaces and accelerates corrosion, especially at welds, hinge pins, and anywhere the galvanized coating was ground away during fabrication. Your friend’s gate in inland Fort Worth sits in drier air most mornings. If you’re replacing hinges or a gate near the lake, stainless steel hardware is worth the extra cost. Call (817) 241-4067 and we’ll look at what’s on your gate now.
Check it twice a year, once at the end of summer and once in late spring, because that’s when Benbrook’s Vertisol clay does its shrinking and heaving. Walk to the hinge post and look for a gap between the post and the adjoining fence, or a gate leaf that’s started dragging. If the latch misses by even a quarter inch, the post is moving. Early shimming or a proper footing re-set costs far less than replacing a twisted panel and bent hinges later.
On a cove-side street off Winscott Road or along the lake’s southern arms, galvanized steel will show surface rust at the welds and hinge pockets within a few years even if the rest of the frame survives. Powder-coated aluminum or stainless-fitted steel lasts materially longer in that microclimate. We’ll quote both, show you the price difference, and let you decide based on how long you plan to own the house.
The hinge post has moved. Benbrook’s clay soil shrinks and heaves, tilting the post and pulling the latch out of alignment. It’s rarely the latch’s fault. We re-set the post deeper than the active clay line, realign the gate, and the latch works again without forcing it. Patching the latch or bending the panel to compensate just moves the problem a few months down the road.
Yes. Any automated gate installed in Benbrook must comply with current safety standards, which means photo eye sensors, reversing edges, and proper force settings so the gate stops and reverses if a person, pet, or vehicle is in the way. We install and test this on every job, and we’ll show you how to test it yourself. It’s not an add-on. It’s part of the gate. Call (817) 241-4067 for a free measure and an exact quote.
Call Gatewood Fence & Gate for Gate Installation in Benbrook
If your gate is dragging, rusting, or just done, we’ll come measure, write you a real number, and install it right the first time. Hal Gatewood’s crew works Benbrook week in and week out, and the 90-Day Done Right Promise means exactly what it says. Call (817) 241-4067 today for a free estimate, or for a free second opinion on any written quote you’ve already got.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Benbrook since 2001.