Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Benbrook
Gate parts and welding in Benbrook usually comes down to three things: rust at the footing, a post that has shifted in the clay, or a weld that was never strong enough to begin with. A typical hinge replacement here runs $180-$340, a post replacement $400-$850 depending on footing depth, and custom welding starts around $120 for a small bracket repair. We fix the gate where it stands, in your driveway, and we don’t haul it off to a shop. Hal Gatewood has been at this since 2001, and if you call (817) 241-4067, a live person picks up every time, day or night.
Why Gatewood Fence & Gate Is Benbrook’s Preferred Gate Parts & Welding Company
We work the cove-side streets off Winscott Road, the ranch-style subdivisions along Timber Creek, and the newer ornamental-iron driveways in south Benbrook enough to know what fails and why. The name on the shop is Hal Gatewood’s, the address is published, and the license number is there for anyone to look up. That’s the kind of accountability that matters when you’ve been burned by a phone quote that changed at the door. Our pricing is agreed before any work starts, in writing, and it does not move.
Every gate parts and welding job in Benbrook carries our 90-Day Done Right Promise. If it’s not done right, Hal comes back and makes it right. No runaround, no fine print. And because we’re locally owned and owner-operated, you’re not dealing with a faceless rotation of subs. You’re dealing with the person whose name is on the invoice. If you ever want to look him in the eye, drive to the shop. That’s the oldest accountability there is. Call (817) 241-4067 and a live person answers.
Our Gate Parts & Welding Services in Benbrook
Here’s what we actually do for Benbrook homes and lake properties, part by part. You’ll see our Gate Parts & Welding approach is repair-first. We replace what’s failing, not what’s easy to sell.
Hinge Replacement
Benbrook gates sag in the hinge post, not in the middle. That’s where we start. On the 1970s and 1980s ranch homes that dominate Benbrook’s core, original barrel hinges have been wearing for 30 to 50 years. The bottom hinge takes the brunt of it, and once it goes, the whole panel drops and drags. We replace hinges with stainless or powder-coated hardware, shim the panel back to level, and check the post before we call it done. Typical hinge replacement in Benbrook runs $180-$340 per pair, including labor and hardware.
Post Replacement
Benbrook’s heavy black Vertisol clay shrinks and cracks in the summer and heaves after rain. That cycle tilts posts. Near Benbrook Lake it’s worse, because groundwater follows the reservoir level, and the soil-moisture swing is extreme. A post that moves at the footing makes the gate bind, refuse to latch, or scrape the concrete. We cut out the old post, pour a deeper footing, and set a new galvanized or stainless post with proper drainage. Expect $400-$850 for a standard driveway swing-gate post in Benbrook, depending on depth and whether the existing footing is compromised.
Rail Repair
Rail damage on a swing gate usually means the gate was wind-whipped or hit by a vehicle. On Benbrook’s larger lots, wind off the lake can push a gate hard enough to bend or break a top rail over time. We weld the rail back to true, or section in new steel if the old rail is too far gone to trust. The goal is always to keep the original frame if it’s still sound, which it usually is. Fix the panel without the post and you’ll fix it twice, so we inspect the whole assembly before we strike an arc.
Custom Welding
Not every gate problem has a part number. When a 1980s wrought-iron gate has a lattice section cracked through, or a boat-storage gate needs a custom latch bracket to match existing hardware, we fabricate on site. MIG welding with an eye toward the coastal-like humidity around Benbrook Lake means sealing every bead and using stainless or powder-coated stock where rust is a known threat. Custom welding in Benbrook starts around $120 for small repairs and runs up from there based on material and complexity.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re certified to service nine major gate brands, and around Benbrook we see a lot of Linear and DoorKing openers on the newer south-side developments, plus Ghost Controls on lake properties where owners added solar-powered automation to an existing swing gate. When a hinged gate has a rusted post or a dragging panel, the opener often gets blamed for failures it didn’t cause. We diagnose the mechanical side first, then the operator. If you need a board, a limit switch, or a keypad, we stock common parts locally for Benbrook customers and can usually get what we don’t stock within a day or two, not a week.
Common Gate Parts & Welding Problems We See in Benbrook Homes
- Hinge posts rusting out at the footing. On cove-side streets off Winscott Road and along the lake’s southern arms, galvanized posts that have been in the ground for decades fail at the concrete line. The morning fog and persistent humidity off Benbrook Lake accelerates corrosion, and the constant soil-moisture swing works the post loose from its own footing.
- Galvanized frames going rusty within a few years. Homeowners buy “rust-resistant” steel gates and then watch surface rust appear in three or four years. The humidity off the reservoir makes Benbrook a tougher environment for bare galvanized steel than inland Tarrant County neighborhoods. Powder-coated aluminum or powder-coated stainless is the smarter spec here.
- Slide gate rollers jumping the track after heavy rain. The Vertisol clay under lake-adjacent homes heaves after rain and tilts the post or the track foundations. When the track is no longer level, rollers wear unevenly and eventually climb off the rail.
- Weld failures on older ornamental iron. Original 1970s-1990s wrought-iron gates in Benbrook were welded with plain steel rod and left unpainted at the joints. Humidity off the lake finds those joints fast. We grind out the old weld, re-weld with sealed beads, and paint or powder-coat to match.
Pricing for Gate Parts & Welding in Benbrook, TX
Here are real numbers for Benbrook’s market, not phone guesses. Hinge replacement: $180-$340. Post replacement: $400-$850. Rail repair: $150-$400 depending on the severity. Custom welding: $120 and up for small brackets, $400-$1,200 for a full gate-frame rebuild. Slide-gate roller replacement: $150-$350 including realignment. What moves the price is the depth of the existing footing, the thickness of steel, and whether we’re working near the lake where corrosion has compromised more than one component. Every quote is agreed in writing before we start, and we have standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. We’ll also give you a free second opinion on any written estimate from another company. Call (817) 241-4067 for an exact quote. Estimates are free.
We Also Serve Cities Near Benbrook
If you’re reading this from Benbrook proper or anywhere near the lake’s southern arms, we’re already close by. We run service across Fort Worth, Colleyville, North Richland Hills, and Hurst from our metro-area office, and scheduling for Benbrook is handled by the same live person who answers the phone. No dispatch queue, no voicemail. Call (817) 241-4067 and ask for a time that works.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Benbrook
The persistent morning fog and elevated humidity off Benbrook Lake put far more moisture on metal surfaces than inland Tarrant County gets. Galvanized steel relies on a zinc coating, and the zinc burns off faster in that damp-air environment. Within three or four years, you’ll see surface rust at the welds and along the rail seams. The fix is powder-coated stainless or powder-coated aluminum, which we can fabricate or install as a replacement frame. Call (817) 241-4067 and we’ll look at what’s rusted and what’s worth saving.
Yes. We pull the gate panel off the hinge side, chock it safely, and cut the old post out while the operator and its mounting pier stay untouched. On Benbrook homes where the opener is mounted mid-gate or on a separate pad, we protect the arm and limit switches throughout. Once the new post is set and cured enough to hold, we re-hang the panel, re-align the operator, and test the full cycle. Call (817) 241-4067 for a free estimate. The quote is in writing before any work starts.
Almost never. The Vertisol clay under lake-adjacent Benbrook homes expands after heavy rain and lifts the post footings. When the hinge post tilts, the gate panel drops and drags. The panel itself is still straight; the post is the problem. We level or replace the post, reset the hinges, and the gate clears the ground again. Fix the panel without the post and you’ll fix it twice. Call (817) 241-4067 and we’ll diagnose it on site.
We use MIG welding with sealed beads, then grind, prime, and protect the joint. Around Benbrook Lake, bare welds rust fast, so every bead gets sealed and finished. For replacement brackets, hinge plates, and posts on lakeside properties, we spec stainless or powder-coated steel instead of bare galvanized. It costs more up front and lasts far longer in this specific environment. Call (817) 241-4067 and we’ll tell you straight whether a weld is worth making or the part is better replaced.
Yes, in most cases. If the gate panel is sound and the hinge post isn’t rotted or tilted, we can mount a solar-friendly operator on the existing frame and tie in a keypad or intercom. The frame needs to swing true and carry the added hardware without sagging. On gates near Benbrook Lake where the post has already shifted, we replace or re-set the post first, then install the operator. Call (817) 241-4067 and we’ll tell you whether your existing frame can be salvaged, which it usually can.
Call Gatewood Fence & Gate for Gate Parts & Welding in Benbrook
If your gate is dragging, rusted through at the post, or refusing to latch, call (817) 241-4067. A live person picks up, 24 hours a day. We’ll get you on the schedule for a free estimate, give you the price in writing before any work begins, and stand behind every weld and every part with our 90-Day Done Right Promise. Hal Gatewood’s name is on the shop, and the shop serves Benbrook every week. Call today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Benbrook since 2001.