Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington usually means one of three things: a post that’s heaved out of plumb in the black clay, an opener that quit after a storm, or a sagging panel that won’t latch anymore. We fix all three, and we do it the same day you call in most cases. If your gate won’t close, won’t open, or scrapes the ground every time you swing it, call (817) 241-4067 and a live person answers. Hal Gatewood has been running this shop since 2001, and his crew covers every corner of Arlington from Viridian to the 76010 corridor to the neighborhoods off Cooper Street.
We’re not a call center. When you call about a leaning automatic gate near AT&T Stadium or a stuck opener in a subdivision off Green Oaks, the person who answers actually knows the soil, the wind, and the gate brands common here. That matters in Arlington more than most places. This city’s clay and weather are hard on gates, and a repair that ignores either one won’t last.
Why Gatewood Fence & Gate Is Arlington’s Preferred Gate Repair Company
We’ve repaired enough Arlington gates to know the failure patterns before we even back the truck up. A gate post leaning after spring rain? Black clay heave, almost guaranteed. A LiftMaster opener that tripped during a thunderstorm and won’t reset? That control board took a surge off the line or a lightning strike nearby. A cedar privacy gate that ripped loose in a March wind gust? Those solid panels catch wind like a barn door, and the original installer used 3-inch screws in soft post wood.
Hal put his name on the shop and his address on the invoice. That’s the oldest accountability there is. Call at 2 a.m. after a storm has your gate swinging loose and blocking the driveway, and a live person answers, 24/7. We don’t route you to an answering service in another state. The crew is background-checked and uniformed, and they’ll tell you straight whether a repair makes sense or whether a replacement is genuinely cheaper. That repair-first philosophy is why our Gate Repair team gets repeat calls from Arlington homeowners who tried the national outfits once and got burned.
We carry parts for Ghost Controls, DoorKing, Elite, and Mighty Mule openers on the truck. Not every shop in Arlington inventories those locally. When we show up, we show up with what the gate needs, not a promise to come back next week after ordering a capacitor.
Our Gate Repair Services in Arlington
Hinge & Post Repair
In Arlington, hinge and post repair is the bread-and-butter call. Expansive Vertisol clay swells with spring rain and shrinks hard through dry summers, which means your hinge post moves seasonally even if it was set years ago. A gate that was plumb in April may bind at the latch by August. We dig the post down to solid bearing, set a deep concrete footing with rebar, and rehang the gate so the hinges and latch strike align square. We don’t just shim it and hope for rain.
Gate Realignment
Arlington’s summer heat above 100°F warps cedar boards and expands metal frames. Swing gates start to bind, which strains openers and wears out hinges prematurely. Gate realignment here isn’t cosmetic: it’s how you keep an automatic operator from burning itself out. We adjust hinge placement, check post plumb with a level, and make sure the gate weight sits on the hinges instead of fighting them.
Electric Gate Repair
Arlington sits in North Texas hail country, and electric gate openers take a beating every spring. Storms send surges through control boards and light strikes can fry a receiver. Battery backup units also die in the heat, and Arlington’s summer routinely cooks them to the point of failure. We service nine major brands, including Ghost Controls and DoorKing operators found all over Arlington’s newer subdivisions, and we carry common replacement parts with us. A gate that won’t respond to the keypad or remote usually isn’t the motor itself, which means we can often rebuild with our Gate Parts & Welding in Arlington instead of ripping out a good unit.
Automatic Gate Repair
Our Gate Motor & Opener in Arlington run hard through heat, rain, and occasional ice. We see a lot of Mighty Mule units in older subdivisions and Elite operators on newer ornamental iron driveways. Safety photocells drift out of alignment when posts heave, and that kills the operator’s signal or forces it to stop mid-cycle. We realign sensors, repair or replace limit switches, and make sure the gate reverses properly on obstruction, not just when the manual says it should.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Arlington’s neighborhoods mix older Mighty Mule and Linear installs with newer DoorKing and Elite systems, and we keep the most common Arlington-specific parts on the truck so we can usually finish the repair in one visit. A Ghost Controls receiver that cooked in the heat, an Elite limit switch that wore through, a DoorKing board that took a surge: we’ve got the part or we can have it in a day.
Common Gate Repair Problems We See in Arlington Homes
- Post heave in clay soil. Arlington’s black clay swells in spring and shrinks in summer, pushing posts out of plumb on a seasonal cycle. Gates that won’t latch or bind at the strike are the most common repeat call we run in the 76012 and 76013 ZIP codes.
- Wind damage on solid infill panels. North Texas storms turn solid wood or composite gates into sails. Hinges rip from posts, panels bow, and sometimes the post itself snaps at ground level where water has been pooling.
- Summer heat warping and expansion. Above 100°F, cedar pickets cup and twist, and steel frames grow just enough to rub the latch post. A gate that closes fine in the morning may stick by 4 p.m.
- Hail storm opener damage. Spring hail as common as Arlington’s can knock out opener control boards, crack solar panels on low-voltage systems, and dent aluminum gate panels badly enough to affect travel.
Pricing for Gate Repair in Arlington, TX
Here’s what we actually charge in Arlington, and it’s quoted and agreed before any work starts:
- Hinge or latch repair: $85-$190
- Post reset (dig, concrete, rehang): $225-$485 depending on post size and whether it’s a single post or both hinge and latch posts
- Electric opener repair (board, sensor, or limit switch): $110-$380
- Full gate realignment: $120-$260
- Weld or rust repair on ornamental iron: $95-$320
What moves the number: post diameter, whether concrete around the old post needs breaking out, the opener brand, and access. Arlington’s clay adds one wrinkle: if we’re resetting a post, we always recommend going below the active soil zone, which costs a little more in concrete and time. It’s the difference between a fix that lasts and a gate heaving again in twelve months. We’ll always tell you the honest range. Free estimates, no trip charge inside the county, and $40 off any repair over $200. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near Arlington
If you’re in Kennedale, Fort Worth, Hurst, or Haltom City, we run the same trucks and the same 90-Day Done Right Promise. Our Gate Repair in Arlington coverage extends to the border neighborhoods too, and if you’re just down the road, the no-trip-charge-inside-the-county offer applies. One call covers the whole area.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arlington
Because the original post wasn’t set below the active soil zone in Arlington’s expansive black clay. Spring rain soaks the clay and it swells, lifting shallow footings and pushing posts out of plumb. Then summer shrink leaves the post tilted. A proper fix means digging deeper, pouring a footing with rebar, and sometimes using a larger post. That’s how we reset them in Arlington, and that’s why our fixes last. Call (817) 241-4067 if yours is leaning again.
Yes, and it’s one of the most common Arlington failures we see after spring storms. A solid cedar or pressure-treated panel catches enough wind to rip hinge screws straight out, bow the frame, or snap a post at the ground line where water has been sitting. If your gate moved in the last storm, don’t try to force it shut, you’ll worsen the hinge pull-out. Call us and we’ll get it latched and secure the same day in most cases.
Most Arlington electric gates have a manual release handle or key on the operator. For swing gate openers like Ghost Controls, DoorKing, or Mighty Mule, you’ll find a release lever or pull-chain near the motor, often covered by a small cap or key-lock, and our Gate Access Control in Arlington team can walk you through it. Pulling it disengages the gear train so you can push the gate by hand. If the gate has a battery backup, it may still run for a few cycles. After a storm, check that the gate is not obstructed before you release it. If the release is stuck or you can’t find it, call (817) 241-4067 and we’ll talk you through it.
Usually the safety photocells or the control board. Hail can crack the photo-eye lens or knock the sensors out of alignment, and then the opener thinks something is in the way and refuses to close. Storms also create surges that take out opener boards, and Arlington sees it every spring. We check sensors first, then the board, then the motor. Most Arlington hail-damage calls are under $300 to fix.
Not always. If the post is rotting or snapped at ground level, yes, replace it. But a lot of Arlington sag comes from the foundation heaving or from hinges pulling loose, which we can often fix by resetting the post foundation, replacing hinge hardware, or welding reinforcement. We won’t tell you to replace a post when the real fix is a deeper footing. Call for a free estimate, and we’ll show you the exact problem before we quote a dollar.
Arlington’s Clay, Wind, and Heat: What It Actually Does to Your Gate
Here’s the part most gate companies won’t tell you, because it means more work and less profit on the first visit: Arlington’s soil moves. Vertisols, the black gumbo clay under most of this city, expand dramatically when wet and shrink dramatically when dry. Any gate post set too shallow rides that seasonal movement like a buoy. Spring rains push it up and out, then summer drought drops it back down, never quite to the same spot. That’s why we see so many Arlington gates that were “just fixed” last year, now binding at the latch or scraping the driveway. The panel didn’t sag. The ground under the post moved.
That’s why our Arlington post repairs include digging past the active shrink-swell zone and setting a deeper footing with rebar. It’s more concrete, more labor, and it’s the only way to get a gate that stays plumb through two summers and two wet springs. We don’t patch posts. We reset them so they don’t move again.
In the Viridian community, our crew reset a leaning ornamental iron driveway gate after a spring storm saturated the black clay and heaved the hinge post over 2 inches. We dug down to solid bearing, poured a deeper concrete footing with rebar cage, and rehung the gate so the LiftMaster operator and safety photocells aligned square. It has cycled clean through two dry spells since. That’s not a brag. That’s what the soil here demands.
Wind is the second Arlington killer. A solid wood gate catches North Texas spring gusts like a sheet of plywood in a tornado alley, and the load concentrates on the hinges. We see hinge screws stripped out of soft post wood, butt joints popped, and top rails cracked from repeated flexing. Add summer heat above 100°F, which warps cedar and expands steel, and you get a gate that binds and grinds every afternoon until something finally gives. Fix the post without addressing the soil, and you’ll fix it twice. That’s the Arlington rule.
Key takeaways: Arlington’s expansive clay moves gate posts seasonally. Wind loads on solid infill panels rip hinges and bow frames. Heat warps and binds. The fix that lasts is a deeper footing, not a shim. And the price is quoted and agreed before we lift a tool.
Call Gatewood Fence & Gate for Gate Repair in Arlington
If your gate is leaning, stuck, or sitting sideways after a storm, call (817) 241-4067. A live person answers, day or night, and we’ll schedule a time that works for you. No trip charge inside the county, free estimates, $40 off any repair over $200, and a 90-Day Done Right Promise in writing on every job. That’s how Hal has run Gatewood Fence & Gate since 2001, and it’s not changing. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.