Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haslet
Gate parts and welding in Haslet usually come down to one question: can the gate be fixed where it stands, or does it need to be hauled off and replaced? Most of the time, the answer is the first one. Our Gate Parts & Welding team welds on site, in your driveway, so the gate never leaves your property. If you’re off FM 156 or down Harmon Road with a sagging swing gate or a hinge weld that’s let go, call (817) 241-4067 and Hal Gatewood will talk you through what he’s seeing before anyone even shows up.
Key Takeaways:
- Most gate failures in Haslet are repairable without replacing the gate
- We weld on site at your property, not back at a shop
- Every job carries the 90-Day Done Right Promise in writing
- A live person answers the phone 24/7, not a voicemail
- Free estimates with pricing agreed before any work starts
Why Gatewood Fence & Gate Is Haslet’s Preferred Gate Parts & Welding Company
Hal Gatewood has had his name on the shop since 2001. That’s not a slogan. It means when you call about a gate problem in Haslet, the person who answers knows what a Blackland Prairie clay heave does to a post footing, because he’s dug those footings out of the ground more times than he can count. We’re locally owned and owner-operated, with a published address and license number anyone can look up. The person who shows up in Haslet is background-checked, uniformed, and works for the man whose name is on the invoice.
Haslet customers don’t get handed off to a call center three states away. Calls are answered by a live person around the clock. When a February ice storm seizes a hinge barrel and your gate won’t close, that matters. We schedule work in Haslet with a local crew that knows the area, not a rotating cast of subcontractors. And if something isn’t done right, the 90-Day Done Right Promise means one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Haslet
Hinge Replacement
Hinge replacement is where most Haslet gate repairs start. The older welded pipe-rail gates along FM 156 and Haslet Road were never engineered for motorized operators, so when a bolt-on opener torques the gate, the lower hinge weld is usually the first thing to let go. We cut out the failed hinge, weld in a heavy-duty barrel unit, and remount everything so the gate swings true again. On newer acreage-community gates, we see undersized residential hinges wearing egg-shaped from gates that are simply too heavy for what the builder hung.
Post Replacement
Haslet sits on expansive Blackland Prairie clay. It shrinks in drought, swells after rain, and pushes concrete footings around like they’re sitting in mud. A leaning hinge post is almost never a hinge problem. It’s a footing problem. Post replacement here means digging out the old concrete, setting a new post deeper than the original, and often widening the footing so the gate’s weight plus the operator’s torque has something solid to push against. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Rail repair on a Haslet ranch gate usually means welding cracks back together, straightening a bowed bottom rail, or replacing a section that’s rusted through from years of Tarrant County weather. We weld in place, which matters on long driveway gates that are custom-fit to their posts. Taking one of those off site is a crane job and a week without a secure driveway. We’d rather fix it where it hangs.
Custom Welding
Some Haslet properties need something that doesn’t exist off the shelf. A gate that’s 16 feet wide. A section of pipe rail that matches a fence built in 1998. A mounting plate for a solar operator on a gate that was never wired for power. Custom welding means we build it, fit it, and weld it in place so it actually works with the gate you have rather than forcing you into a replacement you don’t need. Hal learned this trade the old way, and it shows in the work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haslet
We’re certified to service nine major gate brands, and in Haslet we see a lot of Ghost Controls, DoorKing, and Mighty Mule operators on acreage properties. We stock the common parts for these brands locally, which means less waiting on a truck from out of state. We also see plenty of LiftMaster and Elite units on newer Haslet builds, same situation. If your operator was installed by a builder and never serviced since, the control board is probably working harder than it should be. We can tell you that before we even open the cover.
Common Gate Parts & Welding Problems We See in Haslet Homes
- Bolt-on operators breaking legacy welds: Along FM 156 and Haslet Road, we routinely find automated swing gates where the operator was bolted onto a welded pipe-rail gate that was never designed for torque. The lower hinge weld cracks, the post leans, and the whole gate binds within two to four years. It’s a pattern we rarely see in the newer subdivisions south of town.
- Clay heave tilting post footings: Blackland Prairie soil under Haslet expands and contracts hard with wet and dry seasons. Concrete footings tilt, hinge posts lean, and swing gates drag or bind. The fix isn’t shimming the gate; it’s resetting the post in a deeper, wider footing.
- Ice storm damage to solar operators: The February 2021 freeze seized hinge barrels and snapped mounting arms on solar-powered gate openers along long driveways far from panel boxes. Battery backups drained, cracked, and quit. If your gate hasn’t run right since that storm, that’s likely where the trouble started.
- Undersized operators on heavy iron gates: Early-2010s acreage communities in Haslet often got residential-grade operators hung on heavy ornamental iron gates. They’ll run for a few years, then burn out a control board trying to move a gate that’s simply too much for them. We see this all over the newer parts of Haslet.
Pricing for Gate Parts & Welding in Haslet, TX
Here are the numbers we quote Haslet customers every week. A hinge replacement on a welded pipe-rail gate runs $150 to $350 depending on how many hinges and whether we’re welding on new barrel units. Post replacement runs $400 to $900 for a standard swing gate post, more if we’re dealing with a long stretch of fence rail that also needs to be cut loose. Rail repair and crack welding typically runs $120 to $400. Custom welding jobs get quoted by the foot and the complexity, but a simple mounting plate or bracket fix usually lands between $100 and $250. Small gate roller replacements start around $75.
We never start work without a written price that you’ve agreed to. No quote changes at the door. Estimates are free, we don’t charge a trip fee inside the county, and if you’ve got a written estimate from someone else, we’ll give you a free second opinion. Seniors and veterans save 10% on everything, permanently, and any repair over $200 knocks $40 off the total.
We Also Serve Cities Near Haslet
Our crews work Haslet week in and week out, but we also cover the surrounding Tarrant County area for Gate Parts & Welding in Haslet and nearby communities. That includes Keller, North Richland Hills, Haltom City, and Colleyville. If you’re just outside Haslet, call anyway. Chances are we’re already in your area.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haslet
Most of those gates were built as manual gates, welded with hinges sized for hand operation. When a bolt-on operator gets added, all the motor’s torque concentrates on the hinge plates, and the lower hinge weld is the first casualty. We see this failure pattern along FM 156 and Haslet Road more than anywhere else in the county. The fix is cutting out the old hinges, welding on heavy-duty barrel units, and in many cases resetting the hinge post. Call (817) 241-4067 and we’ll inspect yours before it fails completely.
Haslet’s Blackland Prairie clay expands and contracts enough to tilt concrete footings out of plumb, which binds swing gates and overloads hinge barrels. A proper post replacement means going deeper than the original footing and widening the base so the post doesn’t keep moving with the seasons. We dig the old footing out completely and set the new post in a way that holds up to both the gate’s weight and the operator’s torque.
Yes. That storm seized hinge barrels, cracked battery backup housings, and snapped mounting arms on solar gate openers all over Haslet, especially on long driveways far from panel power. We’ll open the unit, check the batteries and control board, and tell you honestly what’s worth repairing versus what’s cheaper to replace. The estimate is free, and the price is set before any work begins.
Stop adding up individual weld repairs once you’ve passed roughly $1,500 to $2,000 in recurring hinge and rail work on the same gate, especially if the frame is rusting through in multiple places. At that point a new welded gate built for your operator is often the better money. Hal will tell you straight if you’re chasing a losing battle. We’d rather sell you the right fix once than keep taking your money for the wrong one.
If we’re touching the operator on an automated slide gate in Haslet, yes. Entrapment protection like photo eyes and reversing edges is a safety requirement, not an option, and we won’t put a gate back in service without it working properly. An automated gate that reverses on contact seems like a minor convenience until an animal or a grandchild is in the path. We handle the safety edges and the power run as part of the job.
Call Gatewood Fence & Gate for Gate Parts & Welding in Haslet
If your gate is sagging, dragging, or cracked along a weld, call (817) 241-4067. Hal Gatewood has been fixing gates since 2001, and he’ll tell you over the phone what he thinks you’re dealing with. Estimates in Haslet are free. The price is agreed before work starts. And the 90-Day Done Right Promise means if it’s not right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haslet and the surrounding Tarrant County area since 2001.