Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Fort Worth?
Our Gate Motor & Opener services for replacement in Fort Worth typically cost between $650 and $1,800, depending on the gate’s weight, the motor’s power requirements, and whether we need to update your existing access controls. For simple repairs or minor part replacements, homeowners often spend between $250 and $550, while a full-system replacement with new safety sensors and remote programming sits at the higher end of that range. We provide upfront pricing, so you know exactly what the job costs before we turn a single wrench.
If you are looking for help with your gate motor & opener in Fort Worth, you have likely dealt with companies that quote one price over the phone and change it the moment they pull into your driveway. That is not how we do business at Gatewood Fence & Gate. I have been fixing gates in this area since 2001, and I believe in honest, transparent pricing. When you call us, you aren’t talking to a dispatch center three states away; you are talking to a local shop that stands behind its work with a 90-Day Done Right Promise.
Gate Motor & Opener Cost Breakdown (2026)
Pricing for gate openers in North Texas is rarely a flat rate because every gate setup is unique. Whether you are in a newer subdivision in North Fort Worth or managing a ranch gate out toward Aledo, the hardware requirements change based on the gate’s material and frequency of use.
| Service Description | Estimated Cost Range |
|---|---|
| Minor Repair (Sensor alignment, remote programming, wire troubleshooting) | $180 - $350 |
| Standard Motor Repair (Capacitor replacement, board reset, limit adjustment) | $350 - $600 |
| Complete Gate Opener Replacement (Standard residential) | $950 - $1,600 |
| Heavy-Duty/Commercial Grade Opener Replacement | $1,700 - $2,800+ |
| Access Control Upgrades (Keypads, Wi-Fi modules, intercoms) | $300 - $800 |
These numbers assume standard conditions. If your gate has been dragging or the hinge posts have shifted-which happens frequently in our clay-heavy Fort Worth soil-the motor might be working overtime just to overcome friction. In those cases, the motor isn’t the only problem. We address the root cause, because fixing the motor on a failing gate is just a temporary patch. We have been a local home service business for over 29 years, and we prefer to do the job once rather than returning to fix it twice.
What Affects Gate Motor & Opener Pricing in Fort Worth
When I look at a gate opener, I am not just looking at the brand name on the box. I am looking at how that machine interacts with your specific driveway and the local environment. Here is what actually drives the cost of your project:
- Gate Weight and Material: A wrought iron gate in a historic neighborhood like Fairmount requires a different motor than a lightweight aluminum or cedar gate. The heavier the gate, the more torque the motor needs, which increases the cost of the unit.
- Foundation Stability: If your post has shifted due to our local seasonal expansion and contraction of clay soil, the gate will bind. If we replace the motor without fixing the alignment, the new motor will burn out in months.
- Safety Compliance: Newer gate openers are required to have specific safety sensors (UL 325 standards). If your current setup is decades old, we have to bring the entire system up to code, which adds to the initial installation cost but keeps your family safe.
- Access Requirements: Are you using standard remotes, or do you need a modern Wi-Fi-enabled keypad that lets you open the gate from your phone? Adding cellular or Wi-Fi connectivity to an older system increases the price but adds significant convenience.
- Power Availability: Does your gate have a dedicated electrical line, or are we running a new circuit? If we have to trench for power or install a solar array for a remote gate, that labor increases the total invoice.
Safety is not an optional add-on. If your gate opener does not have functioning entrapment protection devices, it is a danger to your children, pets, and vehicles. We always verify these systems are active before we leave. If you are ever unsure if your gate is safe, call (817) 241-4067 for a professional assessment.
How to Save on Gate Motor & Opener
You do not need to overpay to get a reliable, functioning gate. My philosophy has always been to repair before I replace. Many national companies will tell you that a motor is “dead” because they do not carry the parts to fix a circuit board or a capacitor on-site. I keep my truck stocked with parts for the nine brands we specialize in-LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule-so we can often get you running without a full system swap.
We also keep our overhead low by being a truly local, owner-operated shop. We do not have fancy corporate marketing budgets to pass on to you. Plus, we offer specific ways to keep costs down:
- Take advantage of our standing offers: We provide $40 off any repair over $200.
- Use our free second opinion: If you have a written estimate from another company that seems high, show it to us. We will give you an honest second opinion.
- Senior and Veteran Discount: We offer a permanent 10% discount for seniors and veterans.
- No trip charges: We do not charge a trip fee for service calls within the county.
The name on the shop is my name, and the shop is right here in the community. That is the oldest form of accountability there is. You can drive to our location and look me in the eye if something isn’t right. That is a level of service you won’t get from a national franchise.
FAQs - Gate Motor & Opener Cost
How much does it cost to fix a gate opener that won’t close?
Most repairs for a gate that won’t close-often caused by misaligned sensors or a faulty limit switch-cost between $180 and $400. We will diagnose the issue on-site, tell you exactly what is wrong, and give you a price before we start. Call (817) 241-4067 to get a technician out to your home.
Is it cheaper to repair or replace my gate motor?
It is almost always cheaper to repair. If your motor is less than 10 years old and the gate structure itself is sound, a repair will typically cost 60% to 70% less than a full replacement. We will only recommend a replacement if the motor is obsolete, parts are no longer available, or the cost of the repair exceeds the value of a new, more efficient unit.
Can you fix my gate on the same day?
Because we are a locally owned shop and keep a deep inventory of parts for brands like LiftMaster, FAAC, and Viking, we can often handle repairs on the same day you call. We do not use dispatch queues; when you call us, you are speaking to someone who knows our schedule and can tell you when we can be at your door.
Do you charge for estimates?
We provide free estimates on all new installations. If you have a repair and are outside the county, we may have a small service fee, but we never have a trip charge for clients within our primary service area. If you have a written estimate from a competitor, we are happy to provide a free second opinion.
What happens if the repair fails shortly after you leave?
Every single job we do is backed by our 90-Day Done Right Promise. This is not some vague corporate policy; it is our guarantee that if the work we performed doesn’t hold up, we will come back and make it right. We are not interested in doing a job twice, so we make sure it is done correctly the first time.
Pricing reflects the Fort Worth market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.
What Our Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond