Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fort Worth?
A standard gate installation in Fort Worth typically costs between $1,200 and $3,500 for a residential driveway gate, though the final price depends heavily on the material, the type of automation, and site conditions like soil stability. For a basic manual Pedestrian Gate, you are looking at a range of $600 to $1,500, while high-end custom automated systems can run upwards of $5,000. If you need an exact number for your property, call (817) 241-4067 for a free estimate.
When you start looking at prices online, you will see a lot of national averages that do not apply to the soil and weather we deal with here in North Texas. My name is Hal Gatewood. I have been doing this work since 2001, and I can tell you that the cost is rarely just about the gate itself. It is about how the gate interacts with the ground, the post, and our specific climate. We have been serving Fort Worth long enough to know that if you cut corners on the installation, you will be paying for repairs within two years. My shop is right here, and I stand behind every job with a 90-Day Done Right Promise. If it is not right, I make it right.
Gate Installation Cost Breakdown (2026)
We believe in upfront pricing. You should not have to guess what the final invoice will look like. While every property has unique challenges, the following table provides the current market rates for gate installations in the Fort Worth area as of 2026.
| Gate Type | Estimated Cost Range |
|---|---|
| Manual Pedestrian Gate (Basic) | $600 - $1,500 |
| Standard Driveway Gate (Manual) | $1,200 - $2,800 |
| Automated Driveway Gate (System + Install) | $2,500 - $5,500+ |
| Custom Ironwork/Ornamental Gate | $3,000 - $7,000+ |
| Gate Motor/Opener Retrofit | $1,200 - $2,400 |
The numbers above include labor and basic hardware. When you are comparing quotes, make sure you are asking if they include the concrete work. In Fort Worth, we have a lot of clay soil that expands and contracts with our wet springs and dry summers. If a company tells you they can install a gate post without a deep, reinforced concrete footing, they are setting you up for a sagging gate. We do not do that. We install for the long haul, using proper footings and heavy-duty hinges that keep the gate swinging true for years.
What Affects Gate Installation Pricing in Fort Worth
It is easy to look at a price tag and think it is too high, but there are physical realities to gate installation that dictate the cost. Here is what I look at when I walk a property:
- Foundation and Soil Conditions: Because of the heavy clay content in Fort Worth soil, we often have to dig deeper footings than you might see in other parts of the country. If we hit rock or unstable soil, it requires more labor and concrete to ensure the post stays plumb.
- Gate Material and Weight: A lightweight aluminum gate is cheaper to install because it is easier to handle and puts less strain on the hinges. Wrought iron or custom steel gates are heavy, requiring stronger posts, heavy-duty hinges, and often a more powerful motor to operate safely.
- Automation and Access Control: This is where the price can climb. Adding a high-quality motor from brands like LiftMaster or DoorKing is an investment, but so is the wiring, the safety sensors, and the keypad or remote access systems.
- Site Accessibility: If we can pull a truck right up to the installation point, the labor costs are lower. If we are working on a steep incline or a tight space that requires manual labor instead of machinery, it will take more time.
- Permits and Code Requirements: Depending on where you live in the Fort Worth area, you may need specific permits, especially if the gate affects public easements or utility lines. We handle the paperwork so you do not have to worry about it.
We do not believe in hidden fees. When we give you a quote, that is the price. If you have a written estimate from another company, I am happy to provide a free second opinion. We are locally owned and owner-operated, and we have been at this since 2001. We want to be the last company you ever have to call for gate work.
How to Save on Gate Installation
I know money does not grow on trees, and I want you to get the best value for your hard-earned dollar. The biggest mistake people make is choosing the cheapest contractor upfront, only to pay for repairs a year later. Here is how you can actually save money on your project:
- Bundle Your Services: If you are already doing a fence repair or need a new motor, doing it all at once can save on labor and trip charges.
- Use Our Standing Offers: We keep things simple. We offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. We also do not charge a trip charge if you are inside the county.
- Prioritize Quality Components: It costs more to install a high-quality motor like a Viking or Elite system, but it is cheaper than paying for service calls every six months because a cheap, box-store motor burnt out.
- Ask About Repair First: Before you rip out an old gate and pay for a full replacement, call us. We specialize in on-site welding and repair. Often, we can fix a sagging gate or a malfunctioning motor for a fraction of what a new installation costs.
If you are ready to get a professional, honest assessment of your gate, call (817) 241-4067. I answer the phone myself, and I can usually give you a good idea of what to expect right over the phone.
How to Choose the Right Gate Material for North Texas
Choosing the right material is not just about looks; it is about how the material handles our Texas heat and humidity. I have seen plenty of wood gates warp and rot after just a few years of our intense summer sun and spring rains.
If you want longevity, steel or iron is the way to go. We can weld these on-site, which means we can fit the gate perfectly to your driveway, even if the ground is not perfectly level. If you prefer the look of wood, we recommend using high-quality cedar and ensuring that the gate hardware is heavy-duty enough to handle the weight. A gate sags in the hinge post, not in the middle, and that is where we start when we build or repair. Fix the panel without the post, and you will fix it twice. We build them to last the first time.
FAQs - Gate Installation Cost
How much does it cost to automate an existing manual gate in Fort Worth?
Automating an existing gate typically costs between $1,200 and $2,800, depending on the gate size, the power source, and the brand of the opener. We are certified to service and install nine major brands, including LiftMaster, FAAC, and BFT, so we can find a system that fits your budget and your gate’s weight. Call (817) 241-4067 for a free estimate.
Is it cheaper to repair a gate or replace it entirely?
In most cases, it is significantly cheaper to repair a gate, especially if the frame is sound. We have a repair-first philosophy. I have been doing this since 2001, and I can usually tell within five minutes of looking at a gate if it is worth saving. If we can weld it or replace the hardware, we will do that instead of trying to sell you a new gate you do not need.
Do you offer financing for new gate installations?
We keep our business simple and focused on our local neighbors, so we do not deal with third-party financing banks. Instead, we keep our overhead low and our pricing transparent, which keeps the total cost down for you. We offer straightforward, no-hassle pricing and discounts for seniors and veterans.
How long does a typical gate installation take?
For a standard driveway gate, we can usually complete the installation in one or two days, depending on the concrete curing time. We do not rush the concrete work because that is the foundation of the whole project. If the concrete is not set, the gate will not be stable. We will give you a clear timeline when we look at your site.
Why do I need a professional for gate installation?
Gate installation involves heavy materials, high-tension springs, and electrical components that can be dangerous if handled incorrectly. A gate is not just a piece of metal; it is a security device. If it is not balanced correctly, it can put a massive strain on the motor or, worse, become a safety hazard. We are licensed and insured, and we know how to handle the heavy lifting and the wiring safely. If you have a gate that is acting up, do not try to force it. Call us at (817) 241-4067.
Pricing reflects the Fort Worth market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.
What Our Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond