Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across White Settlement
Gate access control in White Settlement typically runs $450-$1,800 for a complete system, depending on whether you’re adding a keypad to an existing operator or replacing a pre-1990s control board with modern smart access. If you’re looking for Gate Repair in White Settlement, most jobs take one visit, with parts sourced from Dallas-Fort Worth suppliers we’ve used for two decades. Most jobs take one visit, with parts sourced from Dallas-Fort Worth suppliers we’ve used for two decades. If your gate is original to a 1950s-1970s ranch house off Cherry Lane or near the NAS JRB Fort Worth fence line, you’re likely dealing with equipment that predates current safety codes, and that changes what’s actually worth fixing. Call (817) 241-4067 and Hal will tell you straight whether you’re looking at a retrofit or a replacement.
We know White Settlement because we work it constantly. The gate stock here is different from the newer subdivisions in Fort Worth or Hurst. You’ve got original chain-link wing gates on post-WWII ranch homes, ornamental iron added during 1980s remodels, and heavy commercial-style drive gates along the base perimeter. Each one ages differently in Tarrant County clay. Each one needs a different answer.
Key takeaways:
- Keypad and smart access retrofits on existing gates run $450-$900 in White Settlement when the operator is still sound.
- Pre-1990s operators without UL 325 entrapment protection usually need full replacement, not a board swap, because the wiring and mount points aren’t there.
- Clay soil heaving under White Settlement posts is the number one reason access control equipment binds and fails here, and it’s fixable with the right footing work.
- Every quote is written and agreed before work starts. No trip charge inside the county. $40 off any repair over $200.
Why Gatewood Fence & Gate Is White Settlement’s Preferred Gate Access Control Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That matters in a city the size of White Settlement, where people still ask their neighbor who fixed their fence before they call a stranger. We show up in the window we promise, we answer the phone with a live person around the clock, and when a job is done, Hal stands behind it with the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back. No fine print, no runaround.
Our customers in White Settlement don’t want a national franchise rolling a truck from three counties away. They want the person who shows up to know that the houses off Silver Creek Road have gates hung before photo-eye safety was standard, and that the clay under those posts moves more in a wet year than most people realize. That’s us. We’ve repaired and retrofitted access systems all over the 76108 and 76114 zip codes, from the ranch tracts east of Jim Wright Freeway to the fence-line properties west of it.
We’re background-checked, uniformed, and certified to service nine major gate brands. When you call (817) 241-4067, you get a straight answer on price before we ever load a truck. If you’ve got a written estimate from another company, bring it to us for a free second opinion. We’ll tell you honestly if they’re overselling you or if their price is fair.
Our Gate Access Control Services in White Settlement
Keypad Entry
Adding a keypad to a gate in White Settlement is the most common retrofit we do, and it usually runs $450-$750 installed when the operator accepts a wired or wireless input. The catch on older homes is that mid-century property layouts often mean the gate sits fifty or sixty feet from the house, so we run weatherproof low-voltage wire through conduit rather than relying on spotty wireless signal through stucco and aluminum siding. We’ve done keypads on everything from original 1960s chain-link gates to ornamental iron added in the 1990s.
Remote Control
Replacing or programming remotes is straightforward most of the time: $75-$150 for a transmitter paired to an existing receiver, assuming the receiver still works. On older Viking or DoorKing operators in White Settlement, the receiver board is often the failure point, not the remote, and we carry replacements in the truck for the brands we service. If your remote worked fine for years and suddenly quit after a storm, it’s usually the board, and we’ll tell you that before you buy a new remote.
Phone Entry
Phone entry systems, also called telephone entry or gate intercoms, let a guest call your cell phone from the gate and you buzz them in. In White Settlement, these run $1,200-$1,800 installed for a complete system with a new keypad panel, dialer, and power supply, or less if we’re integrating with an existing operator. The older 1950s-1970s lots here often don’t have conduit pre-run to the gate, so part of the job is trenching and running wire. We do it clean, and we don’t leave your yard looking like a construction site.
Card Reader
Card readers and proximity entry are common on properties along the western edge of White Settlement near NAS JRB Fort Worth, where homeowners want controlled access for contractors, caregivers, or multiple vehicles. A basic proximity reader with cards and integration to a compatible operator runs $600-$1,000. The complication we see on the older commercial-style drive gates in that area is that the existing control enclosures are often rusted shut or wired with non-standard voltages, so we plan for a full electrical inspection before we quote anything.
Video Intercom
Video intercoms are the fastest-growing request we get from White Settlement homeowners who want to see who’s at the gate before they buzz them in. A complete video intercom with a camera, monitor, and mobile app integration runs $900-$1,600 installed, depending on how far the gate sits from power. The heat and humidity here degrade cheap outdoor cameras within three or four years, so we spec units with sealed housings and we mount them out of direct western exposure where we can. That’s a local detail that saves you from buying the same camera twice.
Smart Access
Smart access means controlling your gate from your phone, setting schedules, and getting alerts when it opens. On a newer operator already wired for accessories, retrofit smart modules start around $300-$500. On the pre-2000s operators common in White Settlement, smart access usually requires a new control board and receiver, which pushes the job to $800-$1,200. We’ll tell you up front which category your gate falls into, and we won’t sell you a smart module that your panel can’t actually talk to.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
We service and install access control for Viking, Ghost Controls, and DoorKing among others, and we stock common transmitter and receiver parts for these brands to keep White Settlement jobs moving. Ghost Controls and DoorKing are Indiana- and California-built systems found all over Tarrant County; Viking tends to show up on mid-range ornamental iron and works fine until the board ages out. We don’t play favorites. We tell you which board is worth replacing and which one is nickel-and-diming you.
Common Gate Access Control Problems We See in White Settlement Homes
- Hinge post heaving from expansive clay: The Vertisol soil under White Settlement swells in wet winters and shrinks hard in summer. A post that moves even a few degrees pulls the gate out of plumb, which binds the operator and burns out the board or motor. Straightening the panel without resetting the post fixes the symptom, not the failure.
- Pre-UL 325 control boards on 1950s-1970s gates: Gates installed before the 1990s often lack photo-eye wiring, mount points, and the entrapment protection current code requires. Retrofitting safety on these means drilling into frames never designed for it, and often the honest answer is a new operator with the safety built in.
- Obsolete rack and pinion hardware on NAS JRB fence-line gates: The heavy commercial-style drive gates along White Settlement’s western boundary use oversized rack and pinion setups that are expensive to source and seize solid after years without lubrication. These are never a quick swap; they’re a careful, involved repair.
- Weather-related signal failures on older receivers: North Texas ice storms like the 2021 Uri event snap aging chain-link hardware and stress already-weak mounted boards. When a receiver that worked for a decade quits after a freeze, the board usually has hairline cracks you can’t see until they finally break.
Pricing for Gate Access Control in White Settlement, TX
Here are honest ranges for the work we do across White Settlement:
| Service | Typical Range in White Settlement |
|---|---|
| Keypad entry retrofit | $450-$750 |
| Remote replacement / programming | $75-$150 |
| Phone entry system (complete) | $1,200-$1,800 |
| Card reader with proximity cards | $600-$1,000 |
| Video intercom (camera + monitor + app) | $900-$1,600 |
| Smart access retrofit (new board + module) | $800-$1,200 |
| Fence-line style heavy gate repair | $600-$1,800 |
What moves the price: the age of your operator, whether conduit is already run from the house, how far the gate sits from power, and whether the post itself needs resetting before any access equipment goes on. We quote everything in writing before the first tool comes off the truck. No trip charge inside the county. Call (817) 241-4067 for a free estimate, and ask about $40 off any repair over $200 and the permanent 10% discount for seniors and veterans.
We Also Serve Cities Near White Settlement
Our Gate Access Control work regularly takes us into White Settlement and the surrounding area, including Fort Worth, Colleyville, North Richland Hills, and Hurst. When you call (817) 241-4067, you’re talking to someone who knows Tarrant County gates the way a neighbor knows the shortcut to the hardware store.
One thing we see on a lot of older Gate Access Control in White Settlement calls: the original 1950s-1970s wing gates pull their hinge posts out of plumb year after year as the clay underneath swells and dries. On a ranch-style home off Saddle Creek Drive, our tech found a mid-1960s chain-link swing gate whose LiftMaster operator, retrofitted in the 1990s, was grinding because the hinge post had tilted six degrees out of plumb. We reset the post with a deeper concrete footing, installed a new safety photocell to meet UL 325, and rebuilt the control board mounts so the gate no longer slams shut during wet winter months. That’s the difference between fixing the panel and fixing the actual gate.
Post-WWII White Settlement was built fast as a bedroom community for Carswell AFB workers, and the gates from that era are now 50-70 years old. The chain-link and early wrought iron stock, the modest ranch lots, the original concrete work, it’s all aging out at once. And the same clay soil that heaves under NAS JRB Fort Worth fence-line properties is heaving under your driveway gate too. If your gate has never had a real gate professional on site, there’s a good chance the post, the hinges, and the operator are all telling you something. We’ll listen to what they’re saying and tell you straight what’s worth repairing and what’s cheaper to replace.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in White Settlement
The panel isn’t the problem; the post is. The expansive clay under White Settlement swells in wet weather and shrinks in dry heat, and over 50 or 60 years, that movement slowly walks the hinge post out of plumb. Straighten the panel without resetting the post and you’ll be back here in a year. Call (817) 241-4067 and we’ll check the post first, because that’s where the sag actually lives.
Yes, in most cases we can. The gate itself doesn’t care how old it is; the question is whether there’s an operator already installed or we need to add one. Retrofitting an operator and keypad onto an original chain-link gate typically runs $900-$1,400 for White Settlement Gate Installation, including the post work if needed. We’ll quote it in writing before any work starts.
Stopping mid-travel is never normal. On a Viking operator from that era, the usual culprits are a failing limit switch or a worn capacitor, both replaceable, or a post that’s shifted enough that the operator is stalling against its own load. It’s worth a service call, because half the time the board is fine and the fix is under $200. Call (817) 241-4067 and we’ll diagnose it.
Yes, if the operator predates the 1990s and lacks UL 325 entrapment protection, current safety standards require it. The reality is that many of these old boards don’t have the wiring or mounting provisions for add-on photo-eyes, so the safest and often cheapest answer is a new operator with safety built in. We’ll show you exactly what your existing board can and can’t do before you spend a dollar.
The gate stock along the western edge of White Settlement includes older heavy-duty commercial-style drive gates with oversized rack and pinion hardware that’s hard to source and often neglected for decades. These jobs require more disassembly, more parts lead time, and more careful resetting than a standard swing gate on a ranch house. We quote them separately and honestly. Call (817) 241-4067 for a free estimate on fence-line gate work.
Call Gatewood Fence & Gate for Gate Access Control in White Settlement
If your White Settlement gate is sagging, binding, or running on a control board older than most of the homes in Fort Worth, call Hal at (817) 241-4067. We’ll answer with a live person, schedule a time that actually works, and quote the job in writing before anything starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Settlement and surrounding Tarrant County communities since 2001.