Ghost Controls Gate Installation Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Installation in Fort Worth: What to Know First

Ghost Controls gate installation in Fort Worth is work we do regularly, and most jobs run between $600 and $1,800 depending on whether it’s a new gate, a motor swap, or a full opener system on an existing gate. We’re an independent Ghost Controls service provider, which means we can install, repair, or reconfigure your system without routing through a manufacturer hotline. The honest price posture is simple: you get a written quote before any work starts, and that’s the price you pay. If you’ve got a Ghost Controls opener sitting in a box right now, or one that’s half-installed and giving you grief, call us at (817) 241-4067 and we’ll tell you straight what it’ll take.

Call (817) 241-4067

This page is for Fort Worth homeowners and property owners who own Ghost Controls equipment and want it installed right the first time. Not a call center. Not a subcontractor who shows up once and vanishes. Just us, with a shop you can drive to and a live person on the phone.

Key Takeaways

• We install Ghost Controls gate openers on new and existing gates across Fort Worth, including driveway, swing, slide, and pedestrian gates.
• You get a written quote before work starts, and it doesn’t change at the door.
• Hal Gatewood has been working on gates since 2001, and his name is on the shop.
• Every job carries the 90-Day Done Right Promise in writing.
• Call (817) 241-4067 for a free estimate. A live person answers.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes a solid residential opener, but like any brand, it has patterns. Here’s what we actually see in Fort Worth driveways, not what the spec sheets say.

• AXDP and TSS1 board failures from power surges. The Ghost Controls TSS1 and the older AXDP control boards are sensitive to the electrical swings we get during Texas thunderstorm season. A nearby lightning strike doesn’t have to hit the gate; it just has to ripple through the line. The symptom is a dead keypad and no response from remotes, even though the motor hums when you test it direct. We hard-wire a surge suppressor at the board and replace the control unit rather than jumpering around it. That’s the kind of fix that holds.
• Phantom openings on the TDS2 series. The TDS2 dual-gate opener will sometimes trigger on its own at odd hours, and it’s rarely the board. It’s almost always a wiring nick in the low-voltage run between the two gate panels, usually from Fort Worth’s clay soil shifting the conduit. We trace the whole run, find the nick, and splice it correctly instead of just resetting the opener and hoping.
• Limit-switch drift on the R series. Ghost Controls R-series swing arms use a mechanical limit setup that drifts over time, especially on heavy gates that get opened eight or ten times a day. The gate starts stopping short, or it over-travels and bangs the post. The fix is resetting the limits and torque, then checking the hinge post for movement. A gate sags in the hinge post, not in the middle, and that’s where we start.
• Water intrusion in the GHO series control box. The weatherproof ratings on the GHO line are fine for rain, but Fort Worth doesn’t just get rain. We get sideways wind-driven storms and long humid spells. The control box seal can fail on the bottom edge where the low-voltage wires enter, and once moisture gets in, you’ll see intermittent operation or a keypad that only works half the time. We re-seal the entry with proper conduit fittings, dry the board, and replace it only if it’s corroded past saving.
• Battery-backed units draining fast. Ghost Controls sells battery backup kits, and we see them fail early when the charger board runs hot. Fort Worth summers push the ambient temperature on a black metal control box past 120 degrees, and the charger doesn’t like it. The battery dies within a year instead of three. We mount the charger board with better airflow and, where it’s needed, add a small vented enclosure. It’s a detail Ghost Controls’ own documentation doesn’t cover.

We’re not affiliated with Ghost Controls and we don’t pretend to be. What we are is one of the few shops in Fort Worth that has been elbow-deep in these units for over two decades, and we’ve learned where they break well before the manuals admit it.

Our Ghost Controls Gate Installation Process

Here’s what actually happens when you call us about a Ghost Controls gate installation in Fort Worth.

1. 1
   You call (817) 241-4067. A live person answers, day or night. We ask what Ghost Controls model you have, what the gate is doing, and what you’re trying to accomplish. Then we set a time.
2. 2
   We come out and look. Hal or one of his crew shows up, checks the gate itself first: hinges, posts, level, the load on the opener, the existing wiring. You can’t hang a new Ghost Controls arm on a gate that’s out of square and expect it to last.
3. 3
   We give you a written quote. It covers the parts, the labor, and any welding that’s needed. The price is agreed before we touch a tool.
4. 4
   We do the work. That means mounting the opener correctly, running and securing the low-voltage wire, setting limits and torque, and programming the remotes and keypad. If the gate post needs welding, we weld it on site. The gate stays in your driveway.
5. 5
   We test it under load. Open it, close it, stop it mid-cycle, kill the power and run the manual release, then test the safety edges. If it doesn’t pass, we don’t call it done.
6. 6
   You get the 90-Day Done Right Promise in writing. If something’s not right, one call brings us back. No runaround.

That’s the whole process. No subcontracted crews, no “we’ll send someone out,” no mystery timeline.

What Ghost Controls Gate Installation Costs in Fort Worth

Here’s what you can expect to pay for common Ghost Controls work in Fort Worth. These are real ranges, not phone quotes meant to get a foot in the door.

What moves the price is the gate itself: how heavy it is, whether the posts are solid, whether the wiring run is long or buried under concrete, and whether we’re fixing somebody else’s shortcuts before we can do the job right. We quote it all upfront. No trip charge inside the county, and the senior and veterans discount applies to the total. Call us for a free estimate.

Why Fort Worth Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been at this since 2001, and his name is on the shop. That’s not a slogan. You can drive to the address, walk in, and look him in the eye. He grew up on the south side of Fort Worth, not far from Hulen Mall, and he still lives about ten minutes from where he went to school. When you call about a Ghost Controls opener, you’re talking to someone who has been fixing gates in Fort Worth longer than most of the national brands have been selling here.

We back every job with the 90-Day Done Right Promise, in writing, on every invoice. If it’s not done right, we make it right. We install and service Ghost Controls, but we also work on LiftMaster, Mighty Mule, and DoorKing, so we’re not trying to talk you into a brand we happen to carry. We’re trying to fix your gate. And when the phone rings at 2 a.m., a live person answers it. That’s just how we run things.

FAQs

Call Gatewood Fence & Gate for Ghost Controls Gate Installation in Fort Worth

If you’ve got a Ghost Controls opener that needs installing, a gate that won’t close, or a system that works when it feels like it, call us. We’ll give you a straight answer and a written price before any work begins. Senior and veterans discounts apply, the estimate is free, and there’s no trip charge inside the county. Give me a call - that’s my real number, and I’ll pick up: (817) 241-4067.

Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Fort Worth and nearby areas.