Gate Realignment in Fort Worth, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in Fort Worth, TX

Gate realignment in Fort Worth typically costs between $150 and $400, depending on whether we need to adjust the hinges, re-weld a bracket, or reset a shifting gate post. Most jobs are completed the same day, and we provide a free second opinion if you have already received a higher estimate from another company. If your gate is dragging, hitting the pavement, or refusing to latch, the issue is almost always rooted in the hinge post or the structural integrity of the frame. Because I have been fixing gates in this area since 2001, I have seen every way a gate can fail, and I know that the fix is rarely as simple as tightening a bolt. If you are struggling with a gate that just won’t close right, call me at (817) 241-4067 so we can get it back on track.

When you call Gatewood Fence & Gate, you are not talking to a call center or a dispatch queue. You are talking to someone who actually knows how these systems work. I started this business because I got tired of seeing homeowners get sold an entirely new gate system when all they really needed was a proper alignment and some welding. Whether you are dealing with a sagging entry gate or a driveway gate that has started hitting the concrete, we handle the repair right the first time. You can learn more about our general approach on our Gate Repair in Fort Worth page, or head back to our home page to see everything we do.

When You Need Gate Realignment

Most folks wait until their gate stops working entirely before they search for gate repair near me in Fort Worth, TX. I recommend keeping an eye on the smaller signs, because a gate that drags is putting unnecessary stress on your motor and your hinges. Here is what to look for in your own yard:

• The Gate Drags on the Driveway: If you see a scratch mark or a groove in your concrete, your gate is already failing. This usually means the hinge post has moved or the hinge itself is worn out, and ignoring it will eventually burn out your gate motor.
• The Latch Misses the Catch: When your gate closes but doesn’t lock because the latch is too high or too low, it is a security risk. This is often caused by the gate frame twisting or the ground shifting, which is common in the Fort Worth area due to our clay soil.
• The Hinge Gaps are Uneven: Take a look at the gap between your gate and the post. If it is tight at the top and wide at the bottom, your gate is sagging. If you don’t fix this, the hinge will eventually rip away from the post.
• The Motor Sounds Strained: If you hear your operator struggling, grinding, or slowing down as it reaches the closed position, it is fighting against a misaligned gate. This happens frequently with heavier units like those made by Elite or DoorKing.
• Visible Rust or Fatigue at the Weld Points: Check the spots where the hinges connect to the frame. If you see cracks in the paint or signs of rust around the weld, the structural integrity of the gate is compromised.
• The Gate Bounces When Closing: If your gate vibrates or bounces when it hits the stop, the alignment is off, and the hardware is taking a beating every single time it closes.

Our Gate Realignment Process

I do not believe in temporary fixes that will just require another service call in six months. When I realign a gate, I am looking at the entire assembly, from the foundation of the post to the tension on the operator arm. Here is how we handle it.

1. Initial Assessment: I arrive on-site to look at the post and the gate frame. A gate sags in the hinge post, not in the middle. If the post is leaning, no amount of adjusting the hinges will fix the problem permanently. We verify if the issue is the gate itself or the structural support.
2. Hinge and Hardware Inspection: We check every hinge for wear. If the bearings are shot or the hinge pin is worn down, we replace the hardware. We use heavy-duty components that are designed to handle the weight of the gate, not the lightweight hardware often found at big-box stores.
3. On-Site Welding: This is where we are different. If your gate frame has twisted or the hinge brackets have failed, I bring my welding equipment to your driveway. We don’t haul your gate off to a shop unless it is absolutely necessary. We weld the brackets back to the frame or the post, ensuring a bond that is stronger than the original factory setup.
4. Post Stabilization: If the ground has shifted and the post is leaning, we address the foundation. We may need to install a brace or reinforce the footing to ensure the gate stays level. This is critical in Fort Worth, where the soil conditions can wreak havoc on fence and gate posts over time.
5. Operator Calibration: Once the physical gate is level and moving freely, we adjust the operator. Whether you have a Ghost Controls system or a Mighty Mule, we recalibrate the limit switches and the force sensitivity settings. This ensures the motor isn’t working harder than it needs to, which extends the life of your entire system.

Safety is the most important part of this process. If your gate uses high-tension springs or cables, these components are under immense pressure. Never try to adjust these yourself if you aren’t trained for it, as they can cause serious injury if they snap or release unexpectedly. My team and I are trained to handle these dangerous components safely. If you have questions about your specific gate, call us at (817) 241-4067.

Gate Realignment Pricing in Fort Worth

I believe in upfront, honest pricing for our gate repair services. You won’t find any hidden fees or surprise charges when I show up at your door. We charge based on the labor and materials required to fix the problem permanently. While every gate is different, here is what you can expect for typical realignment work in the Fort Worth area.

We want to make sure you are getting the best deal possible, which is why we have some standing offers. We offer $40 off any repair over $200, and there is no trip charge for jobs inside the county. If you are a senior or a veteran, you get a permanent 10% discount on our services. If you have already had someone else out and you are not sure about their estimate, call me. I offer a free second opinion on any written estimate you have received, and I can explain how much gate repair costs in 2026. My name is on the shop, and the shop is down the road-that is the oldest accountability there is.

FAQs - Gate Realignment

Can you fix my gate the same day I call?

Most of the time, yes. Because I keep my truck stocked with the tools and parts needed for common gate issues, I can usually handle an alignment or a welding repair on the spot. If your gate is a security risk because it won’t close, let me know when you call (817) 241-4067, and I will do my best to prioritize your visit.

Is it cheaper to repair the gate or replace it?

In almost every case, it is cheaper to repair it. Many national companies will push you toward a full replacement because it is easier for them than doing the actual labor of welding and realigning. I have been in this business since 2001, and I have fixed gates that other companies told the owners were “totaled.” If I truly believe a repair is a bad investment, I will tell you, but I will always try to save your gate first.

Do you work on my brand of gate opener?

We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you have a simple residential opener or a more complex system, I know how to calibrate the limits and force settings to match the newly aligned gate.

What if the gate starts sagging again?

That is exactly why I provide our 90-Day Done Right Promise. If the work I do doesn’t hold up, you call me, and I come back to make it right. No runaround, no excuses. I stand behind my work because my name is on the invoice and on the shop door.

If you are ready to get your gate moving the way it should, call (817) 241-4067. I am happy to talk through your symptoms over the phone and give you an idea of what to expect before I head out to your property in Fort Worth.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.