Electric Gate Repair in Fort Worth, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Fort Worth

Electric gate repair in Fort Worth typically ranges from $150 to $450 depending on whether the issue is with the circuit board, the gate motor, or the safety sensors, and we can usually get your gate moving again the same day you call. When your electric gate stops responding, it isn’t just an inconvenience; it is a security risk that leaves your property exposed until it is fixed. At Gatewood Fence & Gate, we have been handling these repairs since 2001. We do not use dispatchers or call centers. When you call (817) 241-4067, you get a live person who understands how these systems fail in our specific North Texas climate. Whether you need a simple sensor alignment or a complex board replacement, we provide the kind of Gate Repair in Fort Worth that prioritizes keeping your existing equipment running rather than pushing a total replacement.

Why Your Electric Gate Fails in Fort Worth

Living in Fort Worth means dealing with intense summer heat and sudden, soaking spring rains. These conditions are hard on electronics. We see a lot of homeowners who have been told by big, national companies that they need a brand-new system, when in reality, a few hours of focused work and the right parts would have fixed the problem.

We have spent 29 years watching how Fort Worth gates react to the environment. When the humidity spikes, older Ghost Controls or DoorKing systems often start acting up because moisture has found its way into the control box. Or, consider the heavy clay soil we have in neighborhoods like Westover Hills or near Eagle Mountain Lake; if the ground shifts even a fraction of an inch, your gate posts can lean. When that post leans, the gate drags. If the gate drags, the motor works twice as hard to open it, eventually burning out the gears.

Fixing the panel without addressing the post is a mistake you will pay for twice. We look at the whole system because we want the repair to last. If you are tired of dealing with companies that treat your gate like a generic product, give us a call. We are locally owned, we keep our shop address published, and we stand behind our work with a 90-Day Done Right Promise.

Common Signs You Need Service

You do not always need a full replacement when your gate acts up. Most of the time, it is something we can fix on-site. Here are the most common issues we see in Fort Worth:

• The gate stops mid-cycle: This is often a safety sensor issue. If the infrared beam is blocked or the sensors are misaligned due to vibration, the motor will cut power to prevent an accident.
• Grinding or screeching noises: If you hear metal-on-metal, stop using the gate. It usually points to stripped gears in your Elite or Mighty Mule motor, and running it further will turn a $200 repair into a full motor replacement.
• The gate won’t open with the remote: This could be a dead battery, but if fresh batteries do not solve it, your receiver board might have experienced a power surge or simple component failure.
• The gate drifts open or closed: This is a classic sign of a failing actuator arm or a hydraulic leak. It is a security issue that needs immediate attention.
• Visible rust on the hinges or arm: Our Fort Worth weather can be brutal on steel. If the structural integrity of the gate arm is compromised by deep rust, it needs to be cleaned, welded, or reinforced before it snaps.

If you notice any of these, call (817) 241-4067. We offer a free second opinion on any written estimate you have already received. If someone told you that you need a brand-new system, let us take a look first.

Our Electric Gate Repair Process

We believe in repair-first service. When we show up at your property, we are not looking to sell you a new gate; we are looking for the most efficient way to get your current one working reliably again.

1. Assessment of the entire system: We do not just look at the motor. We check the gate frame for level, the hinges for wear, and the power supply to ensure the voltage is consistent.
2. On-site welding and fabrication: If the frame is sagging or a hinge has broken, we have the tools to weld it right in your driveway. We do not need to haul your gate back to a shop, which saves you time and money.
3. Component testing: Whether it is a circuit board, a capacitor, or a limit switch, we test the electrical components to isolate the exact point of failure. We service major brands like LiftMaster, FAAC, BFT, Linear, and Viking.
4. Safety and alignment check: Once the repairs are made, we re-align the gate and test the auto-close features and obstruction sensors. A gate that closes too fast or without sensing an object is a danger to your family and pets.
5. Verification and the 90-Day Promise: We walk you through the repair we performed. Every job comes with our 90-Day Done Right Promise in writing. If it is not right, we make it right.

Safety Note: Electric gates operate with high-tension springs and heavy moving parts. If your gate has snapped cables or is currently stuck in a position that blocks your exit, please do not attempt to force it open or pull on the manual release without being careful. These gates are heavy and can cause injury. Call us, and we will get there to handle it safely.

Electric Gate Repair Pricing in Fort Worth

We keep our pricing straightforward. You will never find “surprise” fees on our invoices. We offer a $40 discount on any repair over $200, and we never charge a trip fee if you are inside the county.

Keep in mind that these are estimates. The final cost depends on the specific parts required for your brand of gate. Because we are locally owned and have been at this since 2001, we have a network of suppliers that helps us source parts faster than the big box stores. If you are a senior or a veteran, let us know before we start the work - you get a permanent 10% discount. Call (817) 241-4067 for an exact quote.

FAQs - Electric Gate Repair

How quickly can you fix my electric gate in Fort Worth?

We prioritize repairs because we know an open gate is a security risk. In most cases, we can get to your property the same day you call, especially if you are in the immediate Fort Worth area. Call (817) 241-4067 to check our current schedule.

Is it cheaper to repair or replace my gate motor?

Usually, it is significantly cheaper to repair. We often see motors that just need a new capacitor or a simple gear adjustment. Unless the motor housing itself is shattered or the internal electronics are completely fried by a lightning strike, we can almost always fix it for a fraction of the cost of a full replacement.

Do you work on all gate brands?

We are certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been doing this for over 29 years, we have seen almost every model installed in this area.

What if the gate is sagging and dragging on the ground?

A sagging gate is rarely just a “gate” problem - it is usually a post problem. If your hinge post has moved or the concrete foundation is cracked, we need to address the structural support. We can reinforce the post or re-weld the hinge points to get the gate level again. Call us to inspect the foundation, and we will tell you exactly what is needed to fix it permanently.

If you have a problem with your gate, you don’t need a corporate sales pitch. You need someone who knows how to fix the mechanics of it. We are a local business that has been serving Fort Worth neighbors since 2001. We answer our own phones, we show up when we say we will, and we fix the problem the right way the first time. Call (817) 241-4067 for a free estimate and let us get your gate working again.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth.