Ghost Controls Gate Access Control Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Access Control in Fort Worth: What to Know First

We service Ghost Controls gate access control systems all over Fort Worth, from keypads and remotes to phone entry and video intercoms. Most Ghost Controls repair calls get a same-day or next-day visit from Hal’s crew, and you’ll know the price before we touch a single wire. If you’ve got a Ghost Controls gate that won’t open, won’t close, or opens for everyone but you, call (817) 241-4067 and talk to a real person.

Call (817) 241-4067

This page is for Fort Worth homeowners and property owners who own a Ghost Controls opener and need their access control working again. Whether it’s a keypad that ignores the code, a remote that worked last week and quit this morning, or a phone entry system that buzzes but doesn’t open, we’ve seen it and fixed it. As an independent Ghost Controls service provider, we don’t answer to a manufacturer’s call script. We answer to you.

Key Takeaways

• We’re an independent Ghost Controls service provider, not a manufacturer call center.
• Same-day or next-day service on most Ghost Controls access control repairs in Fort Worth.
• You get a written price before any work starts. No surprises at the door.
• 90-Day Done Right Promise on every job, in writing.
• Live person answers the phone, 24/7. No voicemail maze.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls builds a decent residential opener, but around Fort Worth we see the same handful of failures repeat themselves. Here’s what actually goes wrong and what we do about it:

• Keypad codes erase themselves after power flickers. This shows up most on the older Ghost Controls TSS1 and TDS2 series. A brownout or lightning strike near the property wipes the stored codes, and then half the family is punching the wrong PIN at the gate. The real cause is usually a dead backup battery on the control board. We replace the battery, reprogram the codes, and add surge protection so it doesn’t happen again in the next thunderstorm.
• Remote range drops to twenty feet, then ten, then nothing. The Ghost Controls GTR series remotes often suffer from antenna corrosion inside the receiver box, especially with Fort Worth humidity and our clay-heavy soil holding moisture against the post. We open the receiver, clean or replace the antenna connection, and if the remote itself is weak, we pair a compatible replacement rather than charging you for a whole new board.
• The gate opens but the keypad won’t release the latch. On Ghost Controls systems paired with a magnetic lock, we frequently find the relay sticking after a few Texas summers. The relay clicks, the board says open, but the mag lock never releases. It’s a fifteen-minute fix if you know to look at the relay, and a head-scratcher if you don’t. We look at the relay first.
• Phone entry dials out but nobody can hear the caller. This one plagues the Ghost Controls AXDP series used in a lot of Fort Worth gated driveways. The microphone degrades over time, or a spider builds a nest in the speaker housing. The board is fine. We replace the mic element or clean out the housing, and the audio comes back clean without replacing a $400 controller.
• Smart access apps lose connection after a router change. The newer Ghost Controls app-connected openers need a stable Wi-Fi signal at the gate. In Fort Worth’s older neighborhoods like Wedgwood or Ridglea Hills, the gate is often at the far corner of the property, two brick walls and a metal fence away from the router. We install a small wireless bridge or reposition the antenna module, then walk you through the pairing so the app works from your phone again.

Our Ghost Controls Gate Access Control Process

Here’s what actually happens when you call us about a Ghost Controls access problem in Fort Worth:

1. 1
   You call and a person answers. Hal or one of his crew picks up. You describe what the gate is doing. We ask a few questions that tell us which Ghost Controls series you have and whether we can carry the right parts on the first trip.
2. 2
   We show up in the window we promised. No four-hour windows. We tell you when we’ll be there, and we’re there.
3. 3
   We diagnose the access control system, not just the symptom. If a keypad is dead, we don’t automatically assume the keypad is bad. We check the board, the power supply, the ground, and the wiring before we touch a replacement. Sometimes the keypad is fine and the wire underground is shot. We find the truth before quoting a fix.
4. 4
   We quote you a firm price, parts and labor. We use Ghost Controls OEM parts when warranty matters or when aftermarket simply isn’t reliable for that component. Where a quality aftermarket part matches or beats the original, we tell you and let you decide. Either way, the price is set before work starts.
5. 5
   We fix it, test it, and test it again. Every code, every remote, every relay gets cycled multiple times. If the gate is supposed to auto-close, we watch it auto-close. If the phone entry should ring your cell, we call it from the keypad. We don’t call a job done until every function works the way you expected it to.
6. 6
   You get the 90-Day Done Right Promise in writing. If something isn’t right, you call the same number and we come back. No runaround, no “that’s not covered.” Hal’s name is on the invoice.

What Ghost Controls Gate Access Control Costs in Fort Worth

Here’s what you’re typically looking at for Ghost Controls access control work in Fort Worth. These are real ranges for the jobs we see every week:

• Keypad replacement or reprogramming: $85 to $220 depending on whether it’s a code reset or a full swap.
• Remote replacement and pairing: $45 to $110 per remote, including programming and antenna check.
• Relay or control board repair: $120 to $380. We solder and repair boards when possible, which costs less than replacement.
• Phone entry system repair: $150 to $450 depending on the microphone, speaker, or wiring fault.
• Video intercom installation or repair: $300 to $900 for wiring, camera, monitor, and night-vision setup.
• Full access control retrofit (keypad, receiver, mag lock, wiring): $650 to $1,400 on typical Fort Worth residential gates.

What moves the price is wire condition, distance from the house, and which Ghost Controls series you have. Older TSS1 and TDS2 parts are getting harder to source new, which can push cost up or make a quality aftermarket board the smarter call. We’ll lay that out plain before we start. You can also take $40 off any repair over $200, and there’s no trip charge inside the county. Call (817) 241-4067 for a free estimate on your specific setup.

Why Fort Worth Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Hal Gatewood has been fixing gates in Fort Worth since 2001, and he’s seen every brand come and go. Ghost Controls makes a good product, but they don’t repair your keypad at 7 p.m. on a Tuesday. We do. A live person answers our phone around the clock, and the person who shows up to your driveway will be someone whose work Hal signs his name to.

We’re multi-brand, so if it turns out the problem isn’t your Ghost Controls system at all but a LiftMaster receiver someone installed alongside it, or a Mighty Mule arm that’s out of travel, we can fix that on the same trip. No second appointment, no “sorry, we only work on one brand.” Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.

FAQs

Contact Gatewood Fence & Gate for Ghost Controls Access Control in Fort Worth

If your Ghost Controls gate access control is acting up in Fort Worth, call Hal’s crew at (817) 241-4067 for a free estimate. A person answers, you’ll get a straight price, and the work is guaranteed. Twenty-nine years in Fort Worth, same owner, same number, same promise.

Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Fort Worth and nearby areas.