Ghost Controls Gate Repair Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Repair in Fort Worth: What to Know First

Ghost Controls gate repair in Fort Worth typically runs $180-$420 for most opener and arm issues, and we can usually get your gate working again the same day we arrive. The honest version: some Ghost Controls failures are quick fixes, and some mean replacing the arm or board entirely. We quote the price before we touch anything, so you’ll know the number before the work starts.

Call (817) 241-4067

This page is for Fort Worth homeowners who bought a Ghost Controls opener, installed it or inherited it, and now the gate won’t budge, beeps at nothing, or opens halfway and quits. If that’s you, call (817) 241-4067. Hal Gatewood has been fixing gates in this town since 2001, and a real person answers that number around the clock.

How Ghost Controls Products Fail - and How We Fix Them

• Armature slipping on the shaft (AXDP and AXD series). The Ghost Controls armature clamps onto the gate post with a set screw and a keyed bushing. In Fort Worth’s clay soil, posts shift over time, and when the post twists even a few degrees the armature lets go and the arm spins without moving the gate. We see this constantly in older neighborhoods like Wedgwood and Ryan Place. Fix: reset the post alignment, re-key the armature, and torque it properly. Takes about an hour.
• Control board failure after lightning (all series, but the R Series with the plug-in receiver is the most exposed). North Texas gets real thunderstorms, and a nearby strike doesn’t have to hit your gate to cook the board. The board powers up, the remote lights blink, but the motor never engages. Some companies will tell you the whole opener is dead. Usually it’s just the board, and a new one runs roughly $120-$190 for Ghost Controls. We’ll test the motor separately before we recommend anything.
• Limit switches drifting (AXDP, AXHD heavy-duty arm, and the GTH series). Ghost Controls uses magnetic limit stops, and after a few thousand cycles they can shift. The gate starts stopping short of closed, or slams into the post and reverses. This one confuses people because the remotes work fine. We reset the limits and check the stop brackets. If the brackets are bent, we weld a new set on the spot.
• Battery terminals corroding (all solar-capable Ghost Controls kits with the 12V backup). If your gate runs on solar with a battery backup, the terminals will corrode eventually. That’s not a Ghost Controls defect. It’s electricity and humidity doing what they do. The gate works slow, then only in one direction, then not at all. We clean the terminals, replace the battery if it’s below voltage, and coat the connections. Most of the time that’s the whole job.
• Receiver range drop-offs (R Series with the external receiver, and older Phantom II remotes). A gate that only opens when you’re five feet away with the remote pointed at the box usually means the antenna wire came loose or the receiver module is failing. Sometimes it’s interference from a new neighbor’s security system. We trace it with a signal meter instead of guessing and throwing parts at it.

Our Ghost Controls Gate Repair Process

1. 1
   You call, a person answers. Not a voicemail tree. We ask what the gate’s doing, what model opener you have, and when you need it fixed. We schedule a window, not a vague “sometime Tuesday.”
2. 2
   We show up and diagnose. Hal or one of his crew checks the armature, the board, the limits, the connections, and the gate itself. A gate that sags in the hinge post will kill a new opener the same way it killed the old one, so we check the gate before we blame the opener.
3. 3
   We give you the number. Fixed price, quoted before any work starts. If we find a second problem while we’re in there, we stop and tell you. No surprises at the end.
4. 4
   Parts decision, made with you. For Ghost Controls, we use OEM parts when they’re available and reasonably priced. When an aftermarket part is genuinely better for the application, we’ll tell you and explain why. You make the call.
5. 5
   The repair. On-site, in your driveway, usually the same visit. We carry common Ghost Controls boards, arms, remotes, and receivers on the truck. If we need a part we don’t have, we’ll order it and give you a real date.
6. 6
   Test and guarantee. We cycle the gate a dozen times, check the force settings, and make sure the auto-close and safety functions work. Every job leaves with the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.

What Ghost Controls Gate Repair Costs in Fort Worth

What moves the price: model series, whether we’re re-keying an existing mount or building a new one, and whether the gate itself has issues that need correcting. You’ll never pay a trip charge inside Tarrant County, and $40 comes off any repair over $200. Call us for a free estimate before you commit to anything.

Why Fort Worth Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Because we fix the gate, not just the opener. A Ghost Controls opener doesn’t fail in a vacuum. The gate sags, or the post shifts, or the chain was never right from the day the last guy left. We find that and fix it, because replacing a $300 opener on a gate that’s out of square just means you’ll replace it again in eighteen months.

Hal Gatewood grew up on the south side of Fort Worth, not far from Hulen Mall, and he’s been at this since 2001. The name is on the shop and on every invoice. We weld on site, we answer the phone at midnight, and we never give you a quote on the phone and a different number at the door. And if your Ghost Controls opener is genuinely beyond saving, we service LiftMaster, Mighty Mule, and DoorKing too, so we can tell you what the better replacement actually is, not just what we have on the truck.

FAQs