Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterMighty Mule Gate Repair in Colleyville, TX | Gatewood Fence & Gate
Gate Repair in Colleyville for Mighty Mule comes down to one thing: most of the FM350 and MM360 operators still running out here were sized for a 300-pound gate, and the iron panel hanging on them now weighs twice that. We’re Gatewood Fence & Gate, an independent Mighty Mule service provider, and we keep the older control boards, limit switches, and gear assemblies in stock because that’s what Colleyville’s estate gates actually run. Call (817) 241-4067 and you’ll get Hal, not a recording.
For over 29 years we’ve repaired what other companies want to replace. Mighty Mule operators on Colleyville’s ornamental iron gates age a certain way in this climate, and we’ve learned exactly how they fail. Mighty Mule sales & service is what we do, and we’re the shop that will weld a cracked hinge in your driveway instead of hauling the gate off and selling you a new one. Call (817) 241-4067 and we’ll give you a straight answer.
Why Colleyville Residents Choose Us for Mighty Mule Service
We know the FM350, MM360, MM571W, and MMK600 series the way a mechanic knows a Ford pickup. Hal Gatewood grew up on the south side of Fort Worth and picked up his welding and metalwork basics at Tarrant County College in the late ’90s, then started this company in 2001 after he saw how few people could fix a busted driveway gate right. Since then we’ve seen hundreds of Mighty Mule operators in Colleyville and the surrounding area, and we still answer our own calls.
Colleyville is different from Bedford or Hurst. The homes are custom, the gates are ornamental iron, and the operators were installed in the ’80s, ’90s, and early 2000s. That means the Mighty Mule units we see are at end of life, and the fixes they need are specific: stripped gears, corroded control boards, and limit switches that shattered during an ice storm. We stock genuine Mighty Mule parts for the older series because that’s what’s actually out here.
Common Mighty Mule Gate Repair Problems We Solve in Colleyville
- Stripped drive gears on FM350 and MM360 operators. Colleyville’s original operators were spec’d for 300-pound panels, but many homeowners upgraded to heavier custom iron gates over the years. The motor has been straining for a decade, and by the time we get the call, the white drive gear is already chewed. We replace the gear assembly and rebalance the load so it doesn’t happen again in six months.
- Control board corrosion after freezes. North Texas ice storms are rough on plastic operator housings. When the housing cracks on an FM350 or MM360, water gets in and shorts the limit-switch circuit. We see this every winter in Colleyville. The fix is a new genuine Mighty Mule board, not a patch job.
- Limit switch arms that shear during freeze-thaw cycles. The same ice that cracks housings also snaps limit-switch arms that haven’t been serviced. If your gate opens fine but slams or reverses at the wrong spot, that’s usually the culprit. We carry OEM replacements.
- Wireless remote range dropping to a few feet. Colleyville’s custom stone pillars and iron fencing block the 318 MHz signal from older MM360 remotes. Your remote isn’t dying; the signal is getting swallowed. We can reposition the antenna or upgrade to a newer receiver while keeping your existing operator.
- Safety beam false triggers from shifting posts. Blackland Prairie clay swells and shrinks under Colleyville all year. When a gate post heaves, the gate leaf shifts just enough to break the photo eye’s line of sight. Your gate reverses for “no reason” because the beam is interrupted. We realign the post and reset the beam.
Mighty Mule Service in Colleyville: What Local Conditions Mean for Your Equipment
Colleyville is consistently ranked among the wealthiest municipalities in Texas, and its primary residential build-out from the mid-1980s through the early 2000s left an unusually high concentration of ornamental iron automated driveway gates that are now 20 to 40 years old. That is not true in Bedford or Hurst. The operators, hinges, and hardware on those gates are now squarely at end of life, and the original Mighty Mule units were often undersized from day one. A tech working Colleyville’s older estate neighborhoods quickly learns that the original 1990s-era residential gate operators were spec’d for a 300-pound panel, but the ‘improved’ wrought-iron gate now weighs 600 pounds. By the time the call comes in, the drive gear is already stripped and the motor has been running hot for years. In neighborhoods like the older sections off Pleasant Run Road, this pattern repeats house after house. Our tech arrived at a custom home off Pleasant Run Road where the original 1998 Mighty Mule FM350 had finally stripped its drive gear after 26 years of pulling a heavier replacement iron gate. We pulled the controller, confirmed the limit switch arm was also cracked from the last freeze, and installed a new gear assembly plus an OEM limit switch in under two hours. The homeowners got a properly weighted operator instead of a ticking time bomb. That’s the work Colleyville gates actually need.
Mighty Mule Models & Products We Service in Colleyville
We service the full line of Mighty Mule operators, including the FM350, MM360, MM571W, and MMK600 series. Most Colleyville estates with original gates are running FM350 or MM360 units, so we keep genuine Mighty Mule control boards, limit switches, and gear assemblies for those series on hand. When an OEM part is discontinued, we’ll tell you plainly and use a quality aftermarket piece only if it makes sense. We also service Gate Realignment, Hinge & Post Repair, and Motor Replacement, because a Mighty Mule operator does not work right if the gate it’s pushing is out of square. We’re an independent provider. We are not manufacturer-affiliated or authorized by Mighty Mule, which means we work for you, not a brand rep.
Mighty Mule Service Pricing in Colleyville
Most Mighty Mule gear or limit switch repairs in Colleyville run between $180 and $340, and a full operator replacement typically lands between $500 and $900 depending on the model and gate weight. What drives the cost up is an undersized motor that’s been straining for years, because the damage isn’t just the stripped gear; it’s also the worn shaft and overheated board. Our free estimate tells you exactly what’s wrong and what it costs before any work starts, and the price is quoted and agreed before we touch a wrench. We don’t charge a trip fee inside the county, and we’ll give you $40 off any repair over $200. Seniors and veterans get 10% off, always. Call (817) 241-4067 for a real number.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in Colleyville
The gear keeps stripping because the gate is too heavy for the operator. The FM350 was spec’d for a 300-pound panel, and many Colleyville iron gates weigh 550 to 650 pounds. Replacing the gear without fixing the load is throwing money away. We can either rebalance the gate or upgrade the motor to match the actual weight. Call (817) 241-4067 and we’ll tell you which one makes sense.
Yes. We keep genuine Mighty Mule control boards, limit switches, and gear assemblies for the MM360 in stock because so many Colleyville homes still run them. If a part has been discontinued, we’ll tell you straight and only use an aftermarket piece when there’s no OEM option left.
It usually is. The stone pillars and iron fencing on Colleyville’s custom properties block the 318 MHz signal from older MM360 remotes, and the range drops off hard. The fix is often as simple as repositioning the antenna or adding a newer receiver that works with your existing operator. We can check this on the same visit.
No. An undersized operator will strip its gear, overheat its motor, and fail early. We see this every week in Colleyville, where homeowners upgraded their gates without upgrading the operator. If your iron gate is heavier than the original, we’ll recommend our Gate Installation in Colleyville with a properly sized replacement motor and explain the cost before any work starts. Call (817) 241-4067 for a free estimate.
The Blackland Prairie clay under Colleyville swells with rain and shrinks in drought, and that seasonal heaving moves your gate posts. When a post shifts, the gate leaf moves with it, and the operator’s limits and safety beam fall out of alignment. We realign the post, reset the limits, and get your gate tracking straight again. Call (817) 241-4067 if your gate is drifting with the seasons.
Service Areas Near Colleyville
We serve the whole Colleyville area, and we’re a short drive from the surrounding communities. If you’re in Fort Worth, North Richland Hills, Hurst, Kennedale, or Keller, we’ll come to you. Our Colleyville work often takes us to Colleyville service area neighborhoods, and we cover Mighty Mule service in North Richland Hills and Mighty Mule service in Fort Worth the same week most days.
Book Your Mighty Mule Service in Colleyville Today
If your Mighty Mule gate is grinding, drifting, or flat-out dead, call (817) 241-4067. We’ll give you a straight answer, a free estimate, and a price quoted before any work starts. Same-day repair is available for most Mighty Mule failures in Colleyville, so don’t wait for the gate to fail completely. Give me a call, that’s my real number, and I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.