Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Fort Worth?
For most gate welding and part replacement jobs in Fort Worth, you can expect to pay between $150 and $450 depending on the complexity of the metal work or the specific brand of hardware being replaced. Simple on-site welding repairs on steel hinges or latch plates typically land on the lower end of that range, while replacing specialized gate opener boards or complex structural reinforcement in older Fort Worth neighborhoods often climbs toward the higher end.
At Gatewood Fence & Gate, we believe in fixing the problem, not just swapping parts until the bill gets high. Whether you are dealing with a sagging hinge post in Westover Hills or a snapped gate arm in Aledo, we bring the welding shop to your driveway. If you need an exact number for your repair, call us at (817) 241-4067 for a free estimate.
Gate Parts & Welding Cost Breakdown (2026)
When you look at a repair bill, you want to know exactly what you are paying for. We don’t believe in hidden fees or surprise charges. Below is a realistic breakdown of what you might see for common gate parts and welding services in the Fort Worth area this year. Keep in mind that these are estimates based on our experience in the field since 2001.
| Service or Part | Estimated Cost Range |
|---|---|
| On-Site Welding Repair (Hinge/Latch/Brace) | $150 - $325 |
| Gate Hinge Replacement (Heavy Duty Steel) | $175 - $350 (Includes welding) |
| Gate Opener Control Board Replacement | $300 - $650 (Part + Labor) |
| Driveway Gate Structural Reinforcement | $250 - $500 |
| Gate Access Control/Keypad Service | $150 - $400 |
| Emergency Gate Welding/Securement | $200 - $450 |
If you see a quote that looks significantly lower than these ranges, be careful. Often, companies will quote a low “trip charge” just to get in the door, only to inflate the actual repair cost once they have you on the hook. We offer upfront pricing. The price we quote is the price you pay, and we back it with our 90-Day Done Right Promise. If we don’t fix it right the first time, we come back and make it right.
What Affects Gate Parts & Welding Pricing in Fort Worth
Not every gate is the same, and neither is every repair. When I come out to look at your gate, I am looking at the specific factors that determine the time and materials needed. Here is what actually drives the cost of gate repairs in Fort Worth:
- Metal Condition and Thickness: If the steel is rusted through or has been patched poorly in the past, it takes more time to grind it down to clean metal before a new weld will hold. We don’t weld over rust because it won’t last, and I won’t put my name on a job that won’t hold up.
- Gate Weight and Size: A standard residential gate is one thing, but if you have a heavy ornamental iron gate that has dropped, it requires specialized bracing and often multiple hands to lift and align before the welding starts.
- Accessibility: If your gate is tucked into a tight corner or buried under overgrown landscaping, it limits how we can position our welding equipment. We need enough room to work safely and effectively.
- Hardware Brand Compatibility: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some parts are proprietary and harder to source quickly than others, which can influence the price.
- Structural Integrity: A gate that sags is usually a symptom of a failing hinge post, not the gate itself. If we just weld the gate and ignore the post, you will be calling us again in six months. We fix the root cause, which costs more upfront but saves you money in the long run.
If you have a gate that isn’t latching or a motor that is acting up, give us a call at (817) 241-4067. I’ve been doing this since 2001, and I can usually tell you what is wrong just by listening to your description of the problem.
How to Save on Gate Parts & Welding
You don’t need to spend a fortune to keep your gate running. I see a lot of homeowners pay for expensive replacements when a simple, well-executed repair would have done the job. Here are a few ways to keep your costs down:
- Get a Second Opinion: If a national company told you that you need to replace your entire gate system, call us for a free second opinion. Often, that “total replacement” is just a sales tactic. We specialize in repair, not just selling new gear.
- Take Advantage of Discounts: We offer a permanent 10% discount for seniors and veterans. It is the least we can do for the people who have built and served this community.
- Repair vs. Replace: If your gate motor is just making a grinding noise, it might just need a new gear or a sensor adjustment. Don’t let someone talk you into a $2,000 replacement until you know for sure that the old one is truly dead.
- Watch for $40 Off: We take $40 off any repair over $200. It is a simple way to help out, and we don’t make you haggle for it.
- Avoid the “Trip Charge”: We don’t charge a trip fee if you are inside the county. Why pay someone just to show up and tell you what you already know is broken?
The best way to save is to call a local, owner-operated shop where the person you talk to is the same person who will show up at your house. When you call (817) 241-4067, you get a live person, not a call center or a chatbot. We are here to help you get your gate back in working order without the runaround.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Fort Worth?
Expect to pay between $150 and $325 for a professional on-site hinge weld. This price covers grinding down the old, failed weld to clean steel, aligning the gate, and performing a structural weld that will actually hold. If you have a gate that is dragging or not latching because the hinge has pulled away from the post, call (817) 241-4067 and we can get it squared away.
Is it cheaper to repair a gate motor or replace it?
In 90% of the cases we see, it is significantly cheaper to repair the motor than to replace it. A replacement can easily run into thousands of dollars, whereas a control board, gear, or sensor repair typically ranges from $300 to $650. We service all major brands like LiftMaster and Viking, so we usually have the parts to get you running again without a full swap.
Can you fix my gate today?
We do our best to provide same-day or next-day service because I know a gate that won’t close is a security risk for your property. We are locally owned and owner-operated, which means we aren’t waiting on a corporate dispatch queue to tell us where to go. Call (817) 241-4067 to see what our schedule looks like for today.
Why does my gate keep sagging even after I weld it?
If you weld the gate but ignore the post, the gate will continue to sag. A gate doesn’t sag in the middle; it sags at the hinge post. If that post is weak, loose, or shifting in the Fort Worth soil, no amount of welding on the gate itself will stop the movement. We look at the whole system-the post, the hinges, and the gate frame-to ensure the repair lasts.
Do you offer any guarantees on your welding work?
Yes, every job we do is backed by our 90-Day Done Right Promise. This isn’t buried in fine print; it is written on every invoice. If the weld fails or the gate isn’t working right within 90 days, you call me, and I come back to make it right. That is the oldest accountability there is-my name is on the shop, and I stand by the work.
Safety and Professionalism
Working on gates is not just about making them look good; it is about making them safe. A heavy iron gate can weigh hundreds of pounds. If a hinge fails or a weld snaps while someone is walking through, the results can be serious. This is why I advise against DIY welding on gate hinges or structural supports. High-tension springs and heavy steel require proper equipment and, more importantly, the experience to know how the gate distributes weight. If your gate is showing signs of stress-creaking, dragging, or failing to latch-don’t wait for it to collapse. Call a professional who has the right tools to handle it safely.
My name is Hal Gatewood, and I have been fixing gates in Fort Worth since 2001. When you call us, you aren’t calling a faceless corporation. You are calling a neighbor who knows that your gate is the first thing people see when they come to your home and the first line of defense for your family. We take that responsibility seriously.
Whether you need a quick weld on a broken latch or a complete overhaul of your gate’s structural integrity, we are ready to help. We don’t believe in “upselling” you on things you don’t need. We believe in showing up on time, doing the job right the first time, and charging a fair price for honest work.
If you are ready to get your gate working properly, give us a call at (817) 241-4067. We offer free estimates, we don’t have trip charges inside the county, and we are always happy to give you a second opinion on any work you’ve been quoted elsewhere. Let’s get your gate fixed so you can stop worrying about it.
Pricing reflects the Fort Worth market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.
What Our Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond