Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across White Settlement
A gate motor installation in White Settlement on an original 1950s or 1960s ranch gate typically runs $1,450 to $2,900, and motor repair work usually lands between $240 and $680. Most jobs we do are finished in one visit because we bring posts, concrete, operators, and controls with us. If your gate motor is grinding, dead, or has never worked right, call Hal at (817) 241-4067 and you’ll get a real person who knows the difference between a Gatewood job and a parts-swap.
White Settlement is a small city completely surrounded by Fort Worth, and most of the residential lots here were built between the 1950s and 1970s. That means the gate hardware we work on is not modern powder-coated aluminum from a big-box store. It’s original chain-link and wrought iron that has been standing in Tarrant County clay for half a century or longer. The operators we install have to survive that history, and we plan for it from the first measurement.
Why Gatewood Fence & Gate Is White Settlement’s Preferred Gate Motor & Opener Company
Hal Gatewood has owned this shop since 2001, and his name is printed on every invoice and stamped on the 90-Day Done Right Promise that comes with every gate motor install and repair. We’re not a franchise that sends rotating techs to White Settlement from a hub across the metro. Hal lives here, works here, and answers the phone here at all hours. When you call (817) 241-4067, the person you talk to is the same person who knows what a southern White Settlement clay-heave failure looks like before he sees it. We’re locally owned and owner-operated with a published address and a license number you’re welcome to check.
White Settlement homeowners call us because we repair what other companies want to replace. A $60 hinge post reset is a lot cheaper than a $2,400 operator swap, and we’ll tell you that before we touch anything. We weld on site, so your gate stays in your driveway instead of leaving on a trailer. And because our Gate Motor & Opener team has been servicing the NAS JRB fence line properties, the Las Vegas Trail corridor, and the older ranch streets around Cherry Park for years, we know which operators survive this soil and which ones burn out in two seasons. We also service the older commercial chain-link slide gates on the west side of White Settlement, near the base. Those racks and pinion assemblies are obsolete, and most shops won’t touch them. We do.
Our reviews from White Settlement customers mention the same three things: we showed up when we said we would, the price quoted at the kitchen table was the price on the final invoice, and the repair held. That’s not marketing language. That’s how a local shop stays busy when the national guys have live chat agents in three states. We stand behind every operator we mount with the 90-Day Done Right Promise, which says plainly: if it’s not done right, one call brings Hal back.
We work throughout White Settlement, including the neighborhoods east of Cherry Lane, the blocks off Saddle Road, and out toward the west edge along the base. Scheduling is coordinated from our Dallas-Fort Worth office, and our crews serve White Settlement directly.
Key Takeaways
- Motor installs on old ranch gates: $1,450 to $2,900. Repairs: $240 to $680. You’ll get a written price before any work starts.
- Original gate posts fail before motors do here. We re-set posts and pour new footings before mounting any operator on a 1950s-1970s gate.
- No power at the driveway? Solar openers with battery backup work well on White Settlement’s long ranch driveways.
- Hal stands behind every job: the 90-Day Done Right Promise is in writing, and a live person answers the phone 24/7.
Our Gate Motor & Opener Services in White Settlement
Motor Installation
A new gate motor install in White Settlement starts with the post, not the operator. Most 1950s-1970s ranch homes here have their original gate posts set in shallow concrete that has crumbled against the expansive clay. If we mount a new operator on a post that moves, that motor is dead inside a year. So we dig, set a proper footing with the right rebar cage and depth, let it cure, and then mount the operator square. On a healthy post, we can complete most residential swing gate installs in one trip. You’ll get a written price before any work begins, and we never change that number at the door.
Motor Repair
White Settlement Gate Repair starts with our repair-first approach. A motor that won’t respond is sometimes a dead capacitor, a stripped plastic gear, a control board with a bad relay, or limits that have drifted from post movement. We don’t quote you a full replacement because someone in a call center read a script. We find it, show you, and fix it. Common repairs around here run $240 to $680. If the failure traces back to a sagging gate or heaving post, we’ll tell you that too, because a new motor bolted to a bad post is not a repair.
Linear Motor
Linear arm motors are common on the ranch gates in White Settlement because they handle long, heavy swing gates and withstand wind and temperature swing better than many plastic-gear residential openers. We install and repair linear units from Viking, DoorKing, and Elite. On heavy wrought iron gates from the 1980s and 1990s remodels, a linear arm often outlasts a standard residential ram by years. We stock common failure parts for these units locally, which means a repair on a White Settlement driveway usually happens same day for us, not same week from a warehouse across the country.
Slide Motor
The older commercial chain-link slide gates along the western edge of White Settlement near the NAS JRB Fort Worth fence line are a special problem. Much of that rack and pinion hardware was installed decades ago and is no longer manufactured. We do full retrofits, which means replacing the rack, the receiver, the wheels, and the motor with modern equipment, often something from DoorKing or BFT. These are measured jobs, not emergency swaps. We’ll come out, measure the gate, spec the retrofit, and give you a free written estimate before any work is ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Settlement
We’re certified to service and install Gate Motor & Opener equipment from nine major manufacturers, and in White Settlement we see a lot of LiftMaster LA400 and LA500 units on the older ranch driveways, along with heavier Viking and DoorKing gear on the slide gates near the base. We carry common control boards, limit switches, capacitor kits, and remote receivers for those brands, which means most White Settlement repairs happen same day without waiting on a parts truck from another county. If your opener is from Mighty Mule, Ghost Controls, FAAC, or BFT, we handle those too. If the nameplate is worn off, Hal can usually identify the unit by the motor housing and limit setup, then source the part from a local distributor.
You’ll never get a brand that is not right for your gate. A decorative 8-foot driveway gate needs a different class of operator than the 16-foot steel slide gate behind a shop on the west side of town. We match the motor to the gate, the soil, the power source, and how you’ll actually use it.
Common Gate Motor & Opener Problems We See in White Settlement Homes
- Sagging 50-70-year-old swing gates pull the hinge post out of plumb. A gate that drags on the latch side has already shifted its hinge post. Mounting or replacing a motor without correcting the sag means the operator fights the gate every cycle until the motor burns out. We fix the post, then the motor.
- Original concrete post footings crumble in Tarrant County’s shrink-swell clay. Dry summers pull moisture out of the soil and it contracts. Wet winters swell it again. A 1964-era gate post set in a 12-inch hole filled with unstable concrete just works loose over decades. Any new opener on a moving post is a short-term rental. We dig, re-set, and pour proper footings before we mount an operator.
- Older slide gates along the NAS JRB fence line have obsolete rack and pinion gear. The original rack sections were welded in place when these gates were first hung, and replacement sections are no longer made. We full-retrofit these with modern rack and a DoorKing or BFT slide motor, including the safety edges and photocells that were often missing entirely on the oldest installs.
- No power run to the driveway end. Long ranch driveways off White Settlement’s west side frequently have no outlet within 100 feet of the gate. A solar gate opener kit with a battery backup handles this cleanly, and we’ve installed these on several Las Vegas Trail area driveways where running conduit would mean trenching under old tree roots and across collapsing gravel.
Pricing for Gate Motor & Opener in White Settlement, TX
Here’s what we quote in White Settlement today. A standard residential swing gate opener on an existing sound post: $1,450 to $2,300. A heavier linear arm unit for a long or ornate wrought iron gate: $1,850 to $2,900. If the post needs digging out and a new footing poured because the original concrete has failed, that adds $275 to $540 per post depending on depth and access. Slide gate motor retrofits on older commercial chain-link gates run $1,200 to $2,400 in motor and rack work, plus any frame repair the gate needs. Motor repair and troubleshooting runs $240 to $680 for most failures, and our senior and veteran discount takes 10% off any repair. Every price is written, agreed, and final before we start, and there is no trip charge inside the county. $40 off any repair over $200 applies too.
Call (817) 241-4067 for a free estimate and Hal will put a number on it today.
We Also Serve Cities Near White Settlement
We work throughout Tarrant County, and if you’re in Fort Worth, Colleyville, North Richland Hills, or Hurst, our Gate Motor & Opener team handles those neighborhoods with the same repair-first approach. Many of our White Settlement customers have family or rental properties in those cities and call us for their gates too. Same shop, same Hal, same 90-Day Done Right Promise.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in White Settlement
Yes. We install solar gate opener kits with deep-cycle battery backup on White Settlement driveways that have no outlet near the gate. The solar panel mounts on the gate post or a nearby pole, the battery sits in a weatherproof enclosure at the post, and the system runs the opener through Tarrant County’s cloudy stretches and short winter days. Most of the solar installs we do on the ranch lots around White Settlement run $1,700 to $2,700 installed. Call (817) 241-4067 and we’ll measure your gate and shade patterns to see if solar or a long conduit run is the better call.
The hinges are not the problem. A gate sags in the hinge post, not in the middle, and on White Settlement’s original 1950s-1970s gate posts, the concrete footing has usually crumbled or the post is pulling out of plumb as the clay expands and contracts. Replacing hinges on a post that moves just transfers the load to the new hinges, and the sag returns. We re-set the post in a new deep footing, correct the frame, and then replace hinges if they are actually worn. A post re-set and gate re-level in White Settlement runs $275 to $540 per post. If you’re seeing a worsening sag, don’t mount a new motor yet. That operator will fail within months. Call (817) 241-4067 for a free look.
Usually yes. The old rack and pinion slide gates along the NAS JRB Fort Worth fence line in White Settlement were built with rack sections and motor gearboxes that are no longer made. If the rack teeth are worn or the pinion is stripped, there is no drop-in replacement. We full-retrofit these gates with new rack, receiver, wheels, and a modern DoorKing or BFT slide motor. That work typically lands between $1,200 and $2,400 plus any structural frame steel the gate needs. The good news: the new setup will run quieter, include working safety edges and photocells, and will not leave you hunting obsolete parts on eBay. We’ll give you a free written estimate before ordering anything.
Yes. Every automatic gate in White Settlement must have functioning protection on both the entrapment zones and the leading edge. If someone cut or bypassed the photocells years ago, your gate no longer reverses when a child, pet, or vehicle is in the path. That’s a serious hazard, and we restore it on every repair or install we touch. Restoring photocells and safety edges on an existing opener in White Settlement typically runs $180 to $380. It’s not optional, and Hal will not leave a gate running without it. Call (817) 241-4067 to schedule a safety check and we’ll test the full system while we’re there.
We start with the post, then the power. On the long ranch driveways off the west side of White Settlement, the two killers are post movement and long conduit runs. We pour deep footings with rebar designed for Tarrant County clay, and we size the operator for the gate’s actual weight and span, not the sticker rating. If there’s no mains power, we install a solar gate opener kit with a lithium or deep-cycle battery sized for the operation’s daily cycles. We also set the opener’s force and limit switches tight so it doesn’t grind at the end of travel. Most operators survive fine out here when the post does not move and the power is steady. If yours is failing, call (817) 241-4067 and we’ll find out why. Estimates are free.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in White Settlement
If your gate motor is dead, grinding, or has never worked right, call Hal at (817) 241-4067. You’ll get a live person around the clock, a straight answer about what’s wrong, and a written price before any work starts. When you call, ask for the free second opinion on any written estimate you already have. We’ll come out, look at the gate and the post, and tell you exactly what we’d do and what it costs. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% senior and veteran discount. Hal’s name is on the shop, and the shop is close enough to visit if you want to look him in the eye before you decide.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Settlement and the surrounding Tarrant County area.