Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Colleyville
A gate motor or opener in Colleyville that has stopped working is never just an inconvenience. It’s a security problem, a school-run problem, and a “how do we get the trash cans out” problem all at once. We’re Gatewood Fence & Gate, and we’ve been fixing automated gates across Colleyville long enough to know exactly where they fail: the clay shifts, the old operators give out, and the heavy iron panels were usually too much for the motor from day one. Call (817) 241-4067 and a live person answers. Not a voicemail. Not a call center three states away.
When we get a call from Colleyville, we’re not guessing at your neighborhood. We drive past the stone entrances off Glade Road, the estate lots off Pool Road, and the gated communities along Cheek-Sparger. We know the homes, we know the gate styles, and we know the soil.
Why Gatewood Fence & Gate Is Colleyville’s Preferred Gate Motor & Opener Company
We’ve been owner-operated since 2001, and the name on the shop is the same name on every invoice: Hal Gatewood. There’s no franchise playbook here, no “zip code assignment” from a regional office. When you call about a gate motor in Colleyville, the person who answers knows the difference between a FAAC and a Ghost Controls opener, and the person who shows up will be the one who fixes it.
Colleyville homeowners tend to do their homework. They ask who’s actually coming to the house, whether we’re licensed and insured, and what happens if the repair doesn’t hold. Those are fair questions. We’re state-licensed and insured, we publish our shop address, and every jobcarries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no “well, that part isn’t covered.” Hal has been standing behind his work in this area for over two decades.
We also understand that Colleyville isn’t Bedford or Hurst. The gate stock is different here. The lots are bigger, the gates are heavier, and the expectations are higher. A service call to a half-acre estate off Hall-Johnson Road is a different job than a production-home subdivision gate in North Richland Hills. We treat them differently because they are different.
Our Gate Motor & Opener Services in Colleyville
Our Gate Motor & Opener work in Colleyville covers everything from a simple capacitor swap to a full slide motor replacement with battery backup. Here’s what most of our Colleyville calls look like.
Motor Repair
Most gate motor failures in Colleyville don’t require a new motor. They require someone to find out why the motor has been working too hard. We open the operator housing, check the drive gear and capacitor, test the control board, and look at the gate itself. In a lot of Colleyville’s older estate gates, the repair is straightforward once you find the actual cause. We repair first and replace only when the motor is genuinely done.
Motor Installation
When a motor truly is beyond saving, or when a homeowner wants a modern opener with battery backup and smart controls, we install new motors rated for the actual weight of the panel. That last part matters in Colleyville. Time after time we see a 1990s opener that was specced for a 300-pound gate trying to swing a 600-pound custom iron panel that got upgraded somewhere along the way. We size the motor for the gate you actually have, not the gate someone ordered in 1995.
Linear Motor
Linear arm motors are common on Colleyville’s swing gates, and they fail in predictable ways. The arm itself wears, the connecting bracket loosens, or the internal limit switches drift. If the post has shifted with the clay, the linear arm has to fight the misalignment every single cycle. We’ll replace the arm when it’s truly worn out, but we’ll also tell you if the post needs to be reset or the hinges need realignment. Fix the motor without fixing the post and you’ll fix it again next year.
Slide Motor
Slide gates are everywhere in Colleyville, especially on shared driveways and narrow entries where a swing gate would block traffic or intrude into a right-of-way. These use a rack and pinion system, and the rack is unforgiving when the ground moves. A slide motor that’s been straining for years will eventually strip its output gear. We replace the motor, but we always check the post footing and the rack alignment first. Otherwise the new motor inherits the same problem that killed the old one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
We service and install all the major brands Colleyville homeowners already have in the ground: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Three we work on especially often in Colleyville are LiftMaster, Linear, and FAAC. The LiftMaster units from the 1990s and early 2000s are the workhorse operators on the estate gates that went in when the city’s big build-out happened. Linear openers are popular on swing applications. FAAC is what we often recommend when the old opener was undersized or the gate is heavy and needs real torque. Because we stock common parts and service nine major brands, we can usually repair what you have without waiting a week for a shipped part.
Common Gate Motor & Opener Problems We See in Colleyville Homes
- Stripped drive gears from seasonal clay movement. The Blackland Prairie soil under Colleyville swells with spring rain and shrinks in the August heat. Post footings move, the gate binds, and the motor’s output gear is the weakest link. We see this constantly on slide gates.
- Burned-out capacitors and gearboxes from undersized 1990s operators. The original motor was sized for a lighter gate. The homeowner later upgraded to a heavy custom iron panel. The motor has been running hot for a decade waiting to fail.
- Cracked operator housings and sheared limit-switch arms after ice storms. A single freeze-thaw cycle can split the plastic or aluminum housing on an aging opener and knock the limit switches out of adjustment. The frequent result is a gate that slams or won’t fully close.
- Misaligned safety photocells that stop the gate dead. When the posts shift, the photocell beam drifts, and the gate thinks something is in the path. The motor is fine. The alignment is not. This is a fast fix if you know to look for it.
Pricing for Gate Motor & Opener in Colleyville, TX
Here’s what you can expect to pay for gate motor work in Colleyville, based on the jobs we do here regularly:
| Service | Typical Colleyville Range |
|---|---|
| Motor diagnostic and minor repair | $120 - $250 |
| Capacitor, limit switch, or photocell replacement | $180 - $380 |
| Drive gear or output shaft rebuild | $320 - $550 |
| Full slide motor replacement (operator only) | $1,500 - $3,400 |
| Full swing arm (linear) motor replacement | $1,200 - $2,900 |
| Battery backup installation (integrated, not a cheap UPS) | $400 - $950 |
| Intercom/keypad integration with new or existing opener | $250 - $700 |
Your price will depend on the weight and length of your gate, whether the post footings need resetting, and whether you want battery backup included.We quote everything up front, in writing, before any work starts. The number we quote is the number you pay. That’s not a sales line; it’s how Hal has run the company since 2001. Estimates are free, and we don’t charge a trip fee inside the county.
We Also Serve Cities Near Colleyville
While our crews handle plenty of Gate Motor & Opener in Colleyville calls, we also work regularly in Bedford, Hurst, North Richland Hills, and Keller. If you’re in one of those cities and your gate operator has quit, call the same number. The same local knowledge applies, and a live person still answers.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Colleyville
The answer is usually in the soil under the post. Colleyville sits on Blackland Prairie clay that expands and contracts so aggressively with moisture that gate post footings can move up to two inches between a wet spring and a dry August. That movement throws the gate out of alignment, which makes the rack and pinion bind, which overloads the motor’s output gear until it strips. If the gear keeps failing, the post footing is the problem, not the motor. We reset the footing, realign the rack, and the next gear lasts. Call (817) 241-4067 and we’ll diagnose it for free.
Yes, but it takes planning. We do this regularly on Colleyville’s shared driveway properties, including a recent job off Hall-Johnson Road where a 600-pound custom iron slide gate served two households. The clay had heaved the rear post footing, stripped the output gear on an undersized LiftMaster, and the gate was stuck mid-travel. We reset the post footing with a deeper pour, realigned the rack, and installed a properly rated FAAC 844 slide motor with battery backup. The gate kept cycling for both households while we worked because we staged the work in phases and scheduled the brief power cuts around the homeowners. We’ll do the same for you and we’ll be honest about the window.
Ninety percent of the time in Colleyville, it’s the post or the hinge. A gate sags in the hinge post, not in the middle. When the post shifts with the clay, the gate panel drops a hair, the opener has to lift more weight on every swing, and the motor burns out slowly. You can replace the motor, but if the post is still moving, you’ll replace it again. We always check the post and hinges before we touch the motor. Call (817) 241-4067 and we’ll tell you honestly which one is failing before we quote anything.
Around here, battery backup is a genuinely useful thing for a residential property. Colleyville gets recurring North Texas ice storms, and when the power goes out, a gate without backup either sits open all night or locks you out of your own driveway. A proper integrated battery backup keeps the gate cycling for days, not hours. We install them on both swing and slide openers, and they’re built into the operator, not a cheap plug-in UPS that dies after two cycles. If your gate is the only way in and out of the property, the backup is worth considering.
In most cases we can integrate what you have. Your intercom and keypad are low-voltage control devices, and most of them send a simple open/close signal that any modern operator will accept. If your existing keypad is a DoorKing or Linear unit, integration is straightforward. We’ll wire the entry controls into the new operator, test all the safety edges and photocells, and make sure the gate still obeys the old keypad and intercom like it always did. There’s no reason to replace a working keypad just because you replaced the motor. Call (817) 241-4067 and we’ll tell you exactly what can be reused before we quote the job.
Local Conditions in Colleyville Change How Gate Motors Fail. We Work Around That.
Colleyville is consistently ranked among the wealthiest municipalities in Texas, and its primary residential build-out from the mid-1980s through the early 2000s left an unusually high concentration of ornamental iron automated driveway gates that are now 20 to 40 years old. That means operators, hinges, and hardware are all reaching the end of their service life at the same time.
But the bigger issue is what the clay does to those aging systems. Colleyville’s Blackland Prairie soil doesn’t just sit there. It swells with spring rain and shrinks during summer droughts, and that seasonal movement is enough to shift gate post footings and throw a slide gate’s rack and pinion out of alignment. When that happens, the motor has to work against the gate’s own weight plus the binding force of the misaligned rack. The output gear strips. The control board overheats. The safety photocells drift. The gate quits.
We also see a pattern specific to Colleyville’s custom estate gates. The original 1990s-era residential operators were often specced for a 300-pound panel, but the “improved” wrought-iron gate the homeowner later installed weighs 600 pounds. The motor has been straining for a decade and the drive gear is already half-gone by the time we get the call. When we replace a motor in Colleyville, we size it for the actual panel weight, not the builder’s original spec.
On a shared driveway off Hall-Johnson Road, our crew was called when a 600-pound custom iron slide gate stopped mid-travel after years of straining that original LiftMaster operator. The clay had heaved the rear post footing, throwing the rack and pinion out of alignment and stripping the output gear. We reset the post footing with a deeper pour, realigned the rack, and installed a properly rated FAAC slide motor with a battery backup so the gate kept cycling for both households while we worked. That’s the difference between fixing the symptom and fixing the footing.
Colleyville’s tight shared driveways and narrow right-of-way entries also mean more slide gates than swing gates in some neighborhoods, especially where a swing gate would block a sidewalk or intrude into a neighbor’s easement. Slide gates demand better post footing stability because the entire panel rides on a rail and rack system. When the ground moves, the slide gate is the first thing to bind. We plan the repair around the soil conditions, not just the motor.
Call Gatewood Fence & Gate for Your Colleyville Gate Motor
If your gate motor is grinding, stripping gears, or refusing to open, call (817) 241-4067. A live person answers 24 hours a day, 7 days a week. You’ll get an honest assessment, a written upfront price, and our 90-Day Done Right Promise on the work. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.